- A shunt generator gave the following results in the O.C.C test at rated speed 2 3. 4 6 8 10 Field current (A): 1 E.M.F. (volt): 90 185 251 290 324 345 360 The field resistance is adjusted to 50 52 and the terminal voltage is 300 V on load. Armature resistance is 0.1 52 and assuming that the flux is reduced by 5% due to armature reaction when a generator runs at the same speed. Calculate the output power supplied by the generator.

- A shunt generator gave the following results in the O.C.C test at rated speed 2 3. 4 6 8 10 Field current (A): 1 E.M.F. (volt): 90 185 251 290 324 345 360 The field resistance is adjusted to 50 52 and the terminal voltage is 300 V on load. Armature resistance is 0.1 52 and assuming that the flux is reduced by 5% due to armature reaction when a generator runs at the same speed. Calculate the output power supplied by the generator.

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

Answer all subparts for thumbs up A 15 - kW, 320-V DC generators has armature, series and shunt field winding resistances of 0.0256 Ω, 0.0946 Ω and 70 Ω respectively. At full load, determine the terminal voltage, if the flux per pole is increased by 7 % and the speed is decreased by 12 % and its connection is (a) series, (b) shunt, (c) long – shunt, and (d) short shunt.
A 6-pole, lap-wound, DC generator has a useful flux per pole of 0.08 Wb. The armature winding consists of 200 turns and the resistance is 0.055 ohms. Calculate the terminal voltage if the resistance of shunt and series field are 100 ohms and 0.02 ohms respectively, when the generator is running at 1000 rpa. Assume generator connection as short-shuntb. Assume generator connection as long-shunt
The rated power of a Comp-connected DC generator operated at rated load is 13927 W and the rated voltage is 140 Volt, and its mechanical losses are measured as 616 W. The armature resistance of this generator is 0.134 ohm and the series field winding resistance is 0.098 ohm. The shunt field winding resistance is 65 ohms and is fed from an external source of 157 Volts. Calculate the generator efficiency of this compound generator. Please answer asap for like this please
The output of a shunt generator is 66 A at 100 volts. Armature and field resistances are, respectively, 0.04 ohm and 25 ohms. If the efficiency at this load is 88%, determine the core and friction losses
A shunt generator has an output of 22 kW at a terminal voltage of 220 V. armature and shunt field resistances are 0.05 ohm and 44 ohms, respectively. If the copper loss is equal to the core, friction and windage losses at this load, the over-all efficiency of this generator is nearest to
A 250 V, compound generator has armature, series field and shunt felid resistance of 0.4 Ω, 0.2 Ω and 125 Ω respectively. If this generator supply10 Kw ,at rated voltage. Ignore armature reaction and assuming a drop of 1 volt per brush. Find the induce e.m.f and the armature current when the machine is connected Short compound . إضافة ملف
A 250 V, compound generator has armature, series field and shunt felid resistance of 0.4 Ω, 0.2 Ω and 125 Ω respectively. If this generator supply10 Kw ,at rated voltage. Ignore armature reaction and assuming a drop of 1 volt per brush. Find the induce e.m.f and the armature current when the machine is connected Short compound .
A long-shunt, four pole, 1500-W, 250-V, duplex wave-wound DC compound generator with the rated speed of 500 r.p.m., has a shunt field resistance of 100 Ω, a series field resistance of 0.05 Ω and an armature resistance of 0.2 Ω. If the flux per pole is 48.798 mWb and a total of 620 conductors, calculate the following: (a) the generated voltage, (b) the field currents, (c) the power generated in the armature.
A certain generator has armature resistance of 0.080 Ω and develops an induced emf of120 V when driven at its rated speed. What is its terminal voltage when 50.0 A is beingdrawn from it?
A 4 pole DC shunt generator with wave wound armature having 389 conductors has to supply a load of 506 lamps each of 100 W at 250V. Allowing 10 V for the voltage drop in the connecting leads between the generator and the load and total brush drop of 2 V. Calculate the armature current and the speed at which the generator should be driven. The flux per pole is 32 mWb and Ra = 0.76 ohms and Rsh = 73 ohms.
Three de shunt generators in parallel running each having an armature resistance of 0.2ohms. running at the same speed and excited to give equal share of total load of 200 kW at a terminal voltage of 500V into a load of fixed machine. If the field current of one generator is raised by 2%, the other remaining unchanged, calculate the output power of each machine and their terminal voltage under this conditions. Assume the speed remains constant and the flux is proportional to field current.
An A 20kW DC shunt generator having an armature circuit resistance of 0.8Ω and a field resistance of 140 Ω, generates a terminal voltage of 230V at full load. Determine the total iron, friction and windage losses if the efficiency of the generator at full load= 83%.