A six-cylinder has a 127 mm stroke and a 107.9 mm bore. According to engine specifications, the compression ratio should be 15.5:1. While overhauling the engine, the mechanic inadvertently installs a head gasket that is 1 mm too thick. Calculate the compression ratio of the engine with the thicker head gasket installed.

A six-cylinder has a 127 mm stroke and a 107.9 mm bore. According to engine specifications, the compression ratio should be 15.5:1. While overhauling the engine, the mechanic inadvertently installs a head gasket that is 1 mm too thick. Calculate the compression ratio of the engine with the thicker head gasket installed.

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter7: Dry Friction

Section: Chapter Questions

Problem 7.70P: Solve Sample Problem 7.16 if the contact pressure under the polisher varies parabolically from p0 at...

See similar textbooks

Similar questions

1. A 4-stroke, single-cylinder gasoline engine has 85-mm bore and 85-mm stroke. What is the piston displacement of the engine? If the engine has a 10-compression ratio, what is its clearance volume? What would be the total volume of the cylinder? 2. A four-stroke gasoline engine is running at a speed of 3,000 rpm. The piston diameter is 4 inches while the stroke is 4.5 inches. What is the speed of the piston? 3. A four-cylinder gas engine has 20-cm cylinder diameter and 40-cm stroke. The cylinders run at 150 rpm speed. The engine is a four-stroke cycle with 8 kg/cm² mean effective pressure. What is the area in cm2 and length of stroke of the engine piston in meter? Also, compute the power stroke per min per cylinder and the total power stroke of the 4 cylinders. Compute the indicated horsepower and the brake horsepower of the engine. And, what is the stroke-to-bore ratio of the engine? 4. Compute the specific fuel consumption of the 10 hp engine that drive a power tiller if it…
A diesel engine four-stroke cycle with three cylinder has a cylinder bore of 90 mm and a stroke of 120 mm. The compression ratio is 16:1 and running at a speed of 2000 rpm. What is the clearance volume of the engine per cylinder?
The driving shaft of a double Hooke's joint rotates at 200 rpm. The angle of the driving and of the driven shaft with the intermediate shaft is 15° If the forks of the intermediate shaft lie in planes perpendicular to each other, determine the maximum and the minimum velocities of the driven shaft.
A 3630 New Holland Tractor has a four-cylinder four-stroke cycle engine. It has a cylinder bore of 8.89 cm, a stroke of 12.7 cm, and a compression ratio of 16.5:1. The tractor can develop 32 hp that can be used for field operation at 2000 rpm. Find the piston displacement (cubic centimeter) of the tractor engine, the total displacement volume (liters) of the tractor engine, the stroke to bore ratio and the piston speed (m/min) of the tractor engine.
Determine the volumetric displacement of a V6 four stroke engine with a bore and stroke of 86x 86 mm and operates at 4200 rpm at full load.
a. A four-cylinder engine has a 85 mm bore ? and 90 mm stroke ?, and operates at 5000 rpm.What is the power lost to piston skirt friction? b. What is the power (?) lost to main crankshaft friction in a four-cylinder engine with a 100mmbore and stroke if the engine is operating at 1500 rpm? Assume the main crankshafthas five bearings, each with a diameter of 50 mm and length of 25 mm. in hand written
The horsepower developed at the end of the crankshaft of a 4-stroke, 4 -cylinder internal combustion engine was found to be 30 HP at a speed of 1500 RPM. The mean effective pressure is 6 kg/cm2. The stroke-bore ratio is 1.3. Find the length of stroke and diameter of bore if the mechanical efficiency is 80%.
What is the power (?) lost to main crankshaft friction in a four-cylinder engine with a 100mmbore and stroke if the engine is operating at 1500 rpm? Assume the main crankshafthas five bearings, each with a diameter of 50 mm and length of 25 mm.
A four stroke cycle, 4 cylinder reciprocating engine with a speed of 1800 rpm has a stroke of 8.0 inches and a cylinder bore diameter of 6 inches. The mean effective pressure inside the cylinder is 200 psi and the mechanical efficiency of the engine is 80%. Determine: a. Piston displacement b. IHP c. BHP d. FHP
. A construction vehicle has a diesel engine with eight cylinders of 5.735-inch bore and 8.0-inch stroke, operating on a four-stroke cycle. It delivers 161-shaft horsepower at 1000 RPM, with a mechanical efficiency of 0.60. Calculate: (3.1) Total engine displacement in litters & Torque at 1600 RPM. [lbf-ft]. (3.2) Indicated horsepower & Friction horsepower
A four-stroke, 12-cylinder diesel engine has a bore and stroke of 820 mm and 2020 mm, respectively, per cylinder. The brake mean effective pressure of each cylinder is 1.2 MPa and the engine rotates at 145 rpm. The brake thermal efficiency of the engine is 32%, the mechanical efficiency is 72% and the net calorific value of the diesel is 40.75 MJ/kg. 1. calculate the specific fuel consumption (kg/kWh) ? Answer to 3 decimal places. 2. calculate thefuel consumption (kg/h) ? Answer to 0 decimal place.
In a double-acting, 2 stroke compression engine, 8-cylinder, the diameter of the cylinder is 700 mm, stroke is 1350 mm and the piston rod diameter is 250 mm. When running at 108 rpm, the indicated mean effective pressures above and below the pistons are 5.8 bar and 4.9 bar respectively. Calculate the brake power of the engine with a mechanical efficiency of 80% in kW.