A soil sample is 6 cm in height and 50 sq.cm in cross section. If 430 mL of water was collected in 10 min under a constant head of 40 cm. On oven drying the test sample had a mass of 498 g. Assuming Gs = 2.6565. Calculate the hydraulic conductivity of the sample. Calculate the actual velocity of the sample. Calculate the superficial velocity of the sampl

A soil sample is 6 cm in height and 50 sq.cm in cross section. If 430 mL of water was collected in 10 min under a constant head of 40 cm. On oven drying the test sample had a mass of 498 g. Assuming Gs = 2.6565. Calculate the hydraulic conductivity of the sample. Calculate the actual velocity of the sample. Calculate the superficial velocity of the sampl

Principles of Geotechnical Engineering (MindTap Course List)

9th Edition

ISBN:9781305970939

Author:Braja M. Das, Khaled Sobhan

Publisher:Braja M. Das, Khaled Sobhan

Chapter7: Permeability

Section: Chapter Questions

Problem 7.22P: Refer to Figure 7.24. The following data were collected during the field permeability measurement of...

See similar textbooks

Similar questions

Refer to Figure 7.24. The following data were collected during the field permeability measurement of a confined aquifer using a pumping test. Determine the hydraulic conductivity of the permeable layer. Use Eq. (7.49). Thickness of the aquifer, H = 4.5 m Piezometric level and radial distance of the first observation well: h1 = 2.9 m; r1 = 17.8 m Piezometric level and radial distance of the second observation well: h2 = 1.8 m; r2 = 8.1 m Rate of discharge from pumping, q = 0.5 m3/min
For a falling head laboratory test, the following are the given values:• Length of soil specimen = 480.0 mm• Initial head = 700.00 mm• Final head = 395.00 mm• Duration of test = 5.5 mins• Area of standpipe = 0.97 sq.cm• Area of specimen = 18.0 sq.cmA. Compute for the hydraulic conductivity of the soil in cm/sec.B. Determine the head difference at t = 3.50 mins.
Length of soil sample for constant head permeability test is 30 cm, Area of specimen is 177cm) constant head difference is so cm, total volume of water collected in 5 min is 350cm Calculate the hydraulic conductivity of the soil.
The following data are for a falling-head permeability test:• Length of the soil sample = 140 mm• Diameter of soil sample = 70 mm• Area of the standpipe = 19.6 mm2• At time t = 0, head difference = 500 mm• At time t = 7 min, head difference = 350 mma. Determine the hydraulic conductivity of the soil (cm/sec)b. What was the head difference at t = 5 min?
The following data are for a falling-head permeability test:• Length of the soil sample = 150 mm• Area of soil sample = 1964 mm^2• Area of the standpipe = 25 mm^2• At time t = 0, head difference = 400 mm• At time t = 8 min, head difference = 200 mma. Determine the hydraulic conductivity of the soil (cm/sec). (ans. 2.75x10^-4 cm/s)b. What was the head difference at t = 6 min? (ans. 23.82cm)
Calculate the coefficient of permeability in mm/s of a soil sample, 6 cm in height and 50 cm2 in cross sectional area, if a quantity of water equal to 430 ml passed down in 10 minutes, under an effective constant head of 40 cm
For a falling head laboratory test, the following are the given values:• Length of soil specimen = 210.00 mm• Initial head = 523.00 mm• Final head = 297.00 mm• Duration of test = 3.50 mins• Area of standpipe = 42.0 sq.mm• Area of specimen = 1050.00 sq.mmA. Compute for the hydraulic conductivity of the soil in cm/sec.B. Determine the seepage velocity if n=0.35C. Determine the head difference at t = 120 sec
In a constant head permeability test, a sample of soil 12cm long and 6cm in diameter discharged 1.8 x10^-3m^3 of water in 15 minutes. The head difference in two piezometers A and B located at 1cm and 11cm, respectively, from the bottom of the sample is 2cm A.Determune the hydraulic conductivity of the soil in cm/s Choices: 0.32,0.40,0.35,0.34 B.Calculate the discharge velocity in mm/s Choices: 0.79,0.68,0.71,0.64 C. How long will it take in minutes for the test to collect 3L of water Choices: 22.29,25,26.15,27.69
In a constant-head permeability test, a sample of soil 12 cm long and 6 cm in diameter discharged 1.5 x 10^(-3) m^3 of water in 10 minutes. The head difference in two piezometers A and B located at 1 cm and 11 cm, respectively, from the bottom of the sample is 2 cm. Determine the hydraulic conductivity of the soil. What is the soil type tested?
Calculate the equivalent hydraulic conductivity in the horizontal as well as the vertical direction for the given stratified soil. Layer Hydraulic conductivity (cm/sec) 1 0.002 2 0.0002 3 0.001 4 0.0003 The depth of each layer is 1 m.
For a falling-head permeability test, the following values are given: Length of specimen = 200 mm Area of soil specimen = 1000 mm^2 Area of standpipe = 40 mm^2 Head difference at time t = 0 = 500 mm Head difference at timt t = 3 minutes = 300 mm Determine the hydraulic conductivity of the soil in ×10−4cmsec Please answer this asap. For upvote. Thank you very much
Sketch the figure and determine coefficient of permeability (k) in mm/min using constant head permeability, given the following data, Water flows horizontally The height of the reservoir supply source is 2 m above the elevation of the outlet. The soil sample length in the direction of water flow is 200 mm. The cross-sectional area of the soil sample is 1,950 mm2. The measured volume of flow for the steadystate condition is 500 ml in a 10-minute time period.