A soil specimen (100 mm × 100 mm × 100 mm) is subjected to the forces shown in Figure below. Determine (a) the magnitude of the principal stresses, (b) the orientation of the principal stress plane to the horizontal, (c) the maximum shear stress, and (d) the normal and shear stresses on a plane inclined at 208 clockwise to the horizontal. 8 kN 2 kN 12 kN 4 kN

A soil specimen (100 mm × 100 mm × 100 mm) is subjected to the forces shown in Figure below. Determine (a) the magnitude of the principal stresses, (b) the orientation of the principal stress plane to the horizontal, (c) the maximum shear stress, and (d) the normal and shear stresses on a plane inclined at 208 clockwise to the horizontal. 8 kN 2 kN 12 kN 4 kN

Principles of Geotechnical Engineering (MindTap Course List)

9th Edition

ISBN:9781305970939

Author:Braja M. Das, Khaled Sobhan

Publisher:Braja M. Das, Khaled Sobhan

Chapter11: Compressibility Of Soil

Section: Chapter Questions

Problem 11.1P

See similar textbooks

Similar questions

The vertical and horizontal stresses at a certain point in soil are as follows:σx = 50 kPaσx = 100 kPaτzx = - 20 kPa a) Determine magnitudes and directions of the major and minor principal stresses.b) Determine magnitude and direction of maximum shear stress.c) Determine the normal and shear stresses acting on a soil element inclined at 60 clockwise from the horizontal plane.
A soil particle is found to be subjected to a maximum stress of 14.6KN/m2 and a minimum stress of - 4.18KN/m2. Find vertical and shear on the plane of angle of friction is 50o with respect to the major principal stress and also find maximum shear
From the given soil formation of the soil with the following properties is shown in the figure. (see picture below) Compute the total stress at the mid-layer of the clay. (Answer: ) Compute the effective stress at the mid layer of the clay. If a load of 1800 kN is acting on the footing 2m x 2m is placed on the ground, find the stress increase at the mid layer of the clay assuming a stress distribution of 1 horizontal to 2 vertical. *unit weight of dry sand = 14.72 kN/m3*
The following picture depicts a soil profile that has two sources of above-ground loading: (1) a point load of 650 kN and (2) a rectangular footing that support a loading of 900 kN. Calculate the following: Vertical effective stress (σ’v ) at point A. Assume free field condition (i.e., no effect from the above-ground point load and rectangular footing). Horizontal total stress (σh ) at point A. Assume free field condition. Vertical effective stress (σ’v ) at point B. Assume free field condition. Vertical effective stress (σ’v ) at point C. Consider the effect from the point load only. Vertical effective stress (σ’v ) at point D. Consider the effect from the rectangular footing only. Use the DM 7.01 method. Approximate method is not allowed. Vertical effective stress (σ’v ) at point E. Consider the effect from the rectangular footing only. Use the DM 7.01 method. Approximate method is not allowed. Vertical effective stress (σ’v ) at point E. Consider the effects from the…
A granular soil is subjected to a minor principal stress of 200 kN/m2. If the angle of internal friction is 30°, determine the inclination of the plane of failure with respect to the direction of the major principal stress. Show free body diagram. a.30 b.45 c.60 d.37.5
A granular soil is subjected to a minor principal stress of 200 kN/m2. If the angle of internal friction is 30°, determine the inclination of the plane of failure with respect to the direction of the major principal stress. a.60 b.37.5 c.45 d.30 e.50
Given the soil profile below, determine the Total Stress, Neutral Stress and Effective Stress at points A, B, C, and D. Plot as well the soil pressure diagram. H1= 1.9m H2=0.95m H3=1.9m Please answer this asap. For upvote. Thank you very much
A soil element is shown in Figure 10.34. Determine the following:a. Maximum and minimum principal stressesb. Normal and shear stresses on plane ABUse Eqs. (10.3), (10.4), (10.6), and (10.7).
1.A dry sand is known to have an angle of internal friction of 29. A triaxial test is planned, where the confining pressure will be 41 kPa. What is the maximum axial stress, in kPa, (major principal stress) that can be applied? Calculate the value to 1 decimal place. Do not provide units in your answer. 2.A clay soil is subjected to a triaxial test under unconsolidated-undrained conditions. At failure, the major and minor principal stresses are 8401 psf and 4875 psf, respectively. What is the shear strength of this soil if the confining pressure is doubled? Provide your answer in psf with no decimals.
From the given soil formation of the soil with the following properties is shown in the figure. (see picture below) Compute the total stress at the mid-layer of the clay. (Answer: 260.745 kPa) Compute the effective stress at the mid layer of the clay. (Answer: 147.93 kPa) If a load of 1800 kN is acting on the footing 2m x 2m is placed on the ground, find the stress increase at the mid layer of the clay assuming a stress distribution of 1 horizontal to 2 vertical. (Answer: 11.64 kPa) *unit weight of dry sand = 14.72 kN/m3*
For the stressed soil element shown:a. Compute the major principal stressb. Compute the minor principal stressc. Compute the normal stress on plane DE
In the given soil profile below determine the following: Maximum and minimum Principal stresses. Normal and shear stress on the shear Plane AE.