A spring is designed to fire a 2 kg projectile. The outside diameter of the coil is 160 mm withan 18mm wire and a total of 22 coils squared and ground. The spring has a free length of 650mm. When set or loaded, the spring is compressed to a length of 450 mm.a. Determine the spring index, as well as the active number of coilsb. Find the spring deflection and Wahl's factor.

To Find : the spring index as well as the active number of coils Given : mass of projectile m=2kg…

A spring is designed to fire a 2 kg projectile. The outside diameter of the coil is 16 an 18mm wire and a total of 22 coils squared and ground. The spring has a free le mm. When set or loaded, the spring is compressed to a length of 450 mm. Determine the spring index, as well as the active number of coils a.

A spring is designed to fire a 2 kg projectile. The outside diameter of the coil is 16 an 18mm wire and a total of 22 coils squared and ground. The spring has a free le mm. When set or loaded, the spring is compressed to a length of 450 mm. Determine the spring index, as well as the active number of coils a.

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter10: Statically Indeterminate Beams

Section: Chapter Questions

Problem 10.5.3P: Solve t he preceding problem by integrating the differential equation of the deflection curve.

See similar textbooks

Similar questions

Repeat Problem 11.2-14 using L = 12 ft, ß = 0.25 kips/in., ßRl= 1.5ßL2, and ßR2= 2 ßR1.
Repeat Problem 10.3-15 using L = 3.5 m, max = 3 mm, and EI = 800 kN·m2.
Determine the minimum force required to deflect the spring with spring constant of 251 N/mm to a displacement of 5 mm.
A spring sustains 200 ft-lb of energy with a deflection of 3’’. Assume that the mean coil diameter is 7 times the wire diameter and that the allowable stress is 100ksi. Determine the wire diameter.
A helical spring, having square and ground ends has a total of 20 coils and its material has a modulus of elasticity in shear of 11.5 × 106 psi. Find out the maximum deflection that can be produced in the spring due to a load of 80 lbs. if the spring has an outside diameter of 3 in. and an inside diameter of 0.15 in.
Three extension springs are hooked in series and supports a weight of 70 kg. One spring has a rate of 0.209 kg ∕mm and the other two have equal spring rate of 0.643 kg ∕mm. Find the deflection.
(5) A gas engine valve spring is loaded to 35kgf when the valve is closed & 52kgf hen the valve is open. The valve lift is 8mm. The outside diameter is to be from 38mm~45mm, & the permissible stress is 413N/mm2 . Determine: (a) the wire & outside diameter; (b) the number of effective coils; (c) the free length when it is squared & ground.
Determine the wahl's factor of a spring designed to fire a 3kg projectile. The outside diameter of the cil is 170 mm with 10mm wire diameter and a total of 20 coils squared and ground. The spring has a free length of 625 mm. When set or loaded the spring is compressed to a length of 444mm.
A high alloy spring has an active coil of 16 and modulus ofelasticity in shear of 85 GPa. Compute the Wahl factor. Thespring outside diameter is 9.66 cm and wire diameter is 0.65 cm.
A spring with squared and ground ends is used for a load and deflection of 1.2 kN and 20 mm, respectively, with a spring index of 4. The wire diameter is 6 mm and the modulus of rigidity is 84 GPa. Which of the following is the active number of turns of the spring?
A square end compression helical spring has an operation load range of 3.5KN to 4.2KN.The deflection for the load range is 8mm and the spring index is 6.if the permissible shear stress and module of rigidity for the material of the spring are 380MPa and 90pa respectively, including the effect of the wire curvature. Design the spring by, determine (A)wire diameter (B) mean coil diameter (C) number of active turns (D)total number of turns
A rod 25 mm in diameter is held between fixed bearings 1.2 m apart and deflects under its static weight. The rod has a density of 7,900 kg/m3. If the lowest critical speed of the system is 750 rpm. Calculate the maximum deflection in millimeters caused by the static weight of the shaft. Take E = 205 GPa