A tank and a deflector are placed on a frictionlesstrolley. The tank issues water jet (mass densityof water = 1000 kg/m³) which strikes the deflectorand turns by 45°. If the velocity of jet leaving thedeflector is 4m/s and discharge is 0.1 m³/s, theforce recorded by the spring will beSpringm²tTank45°Jet of waterDeflectorTimTrolley

Answered: Image /qna-images/answer/52cf7f15-a832-4c97-86ea-575300e8dd7f.jpg

A tank and a deflector are placed on a frictionless trolley. The tank issues water jet (mass density of water = 1000 kg/m³) which strikes the deflecto and turns by 45°. If the velocity of jet leaving the deflector is 4m/s and discharge is 0.1 m³/s, the force recorded by the spring will be

A tank and a deflector are placed on a frictionless trolley. The tank issues water jet (mass density of water = 1000 kg/m³) which strikes the deflecto and turns by 45°. If the velocity of jet leaving the deflector is 4m/s and discharge is 0.1 m³/s, the force recorded by the spring will be

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Related questions

Q: Assuming that traffic on a highway obeys the Greenshields model, the speed of a shockwave between…

A: given- P=1200 vehiclesspeed=60 kmphQ=1800 vehicles/hourspeed=30 kmph

Q: A I. CALCULATE MEMBERS BC, OF, OF OF THE GIVEN TRUSS: KN X 85 KN 385 0=15° ISTO TEC DE LES IF DELIG…

A: The truss is used to carry the point loads at its joints. Due to loads the members either gets…

Q: A steel plate is 300 mm wide and 10 mm thick. A rivet of nominal diameter of 16 mm is driven into…

A: Diameter of the hole =do+1.5 (do≤25mm)d=16+1.5=17.5mm

Q: A container carrying water is moved in a horizontal direction with acceleration of 2.45 m/s². The…

Q: An unsupported slope of height 15 m is shown in the figure (not to scale), in which the slope face…

A: Given data: H=15 mangle of slope=50∘ Cu=75 kPaR=25 mAngle of circular arc= 60∘WKLMN=2500 kN/m

Q: Identify and describe the functional classification of roads with respect to the following road…

A: In Ghana, the Ministry of Roads and Highways is the main institution which is in charge of…

Q: A 15 cm length of steel rod with relative density of 7.4 is submerged in a two layer fluid. The…

Q: A concrete beam prestressed with a parabolic tendon is shown in the sketch. The eccentricity of the…

A: Given- Prestressing force=1620 kNUDL=45 kN/mcross section-width b=500 mmdepth d=750 mmIt is needed…

Q: A simply supported beam AB of span 6 m is loaded as shown in the following Figure. Determine the…

Q: depressed

A: here, x¨= d2dt2x and X⇀ = ddtX we will solve by energy method,…

Q: A concrete retaining wall is shown in the figure. The fill behind the wall has a unit weight of…

A: Solution: Given: H = 20 ft γsoil = 100 pcf q = 2 x 100 = 200 psf ϕ=0

Q: Determine the maximum deflection 8 in a simply supported beam of length L carrying a uniformly…

Q: 4. Determine the rectangular representation of the resultant force and direction angle of the figure…

Q: A 10KN/m 3m 3m B 5m C D 2m H 5m El-Constant Analyze the bearn completely and Draw shear, bending…

A: Hi! Thank you for the question As per the honor code, We’ll answer the first question since the…

Q: A tube-well of 20 cm of diameter fully penetrate a horizontal, confined aquifer of infinite…

Q: Speaking at a road construction indaba on Thursday (24 February), Mbalula said that while the…

A: Answer Following are the three determinants of demand for road transport as a mode of transport.…

Q: tracing implicit curves

A: Interval analysis is basically a numerical analysis where the calculation is done using real numbers…

Q: 2. Determine the magnitude and coordinate direction angles of F3 so that the resultant of the three…

Q: please could someone show me how U2 = 1.98m/s. This is the correct answer but i've tried a few…

Q: Determine the Reactions of the structure. Draw the Shear and Moment diagram Member CDE only. Let P…

Q: A trapezoidal channel, bottom width 6 m and side slopes 1/1, flows 1.2 m deep on a slope of 0.0009.…

Q: A glove box is an enclosure held at a lower pressure than its surroundings to ensure that any fluid…

A: The pressure inside a sealed container inside a laboratory =7.3psig The pressure in the laboratory…

Q: The rigid beam BC is supported by rods (1) and (2). The cross-sectional area of rod (1) is 8 mm².…

A: Given data w = 4.5 KN/m L = 4.75 m C/s area of rod 1 (A1) = 8 mm2 C/s area of rod 2 (A2) = 15 mm2…

Q: A vertical plane area having the shape shown in the figure below is immersed in an oil bath…

Q: A piston having a cross-sectional area of 0.17 m² is located in a cylinder containing water as shown…

A: Solution: Given: A=0.17m2 h1=69mm=0.069m h=101mm=0.101m

Q: In order to calibrate the digital readout of a hydraulic cylinder a cantilever beam with a width of…

Q: The x component of velocity in a two-dimensional incompressible flow is given by u = 1.5 x. At the…

Q: A wheel applies a 40-kN load on a semi-infinite elastic space, as shown in Fig. P2.1. The modulus of…

Q: Only attempt if you know the correct answer with all steps. A cube made of an alloy with dimensions…

Q: which of the intersection layouts

A: Intersection layouts: The given layouts are three way intersection of road layout. To find the…

Q: 2. Determine the slope and deflection at point B of the beam shown by double integration method. -6…

A: Given data E = 10,000 ksi I = 800 in4 Find slope and deflection at point B using double…

Q: Determine the resultant force in bolt R.

A: Given, Column is subjected to a load,P= 60 kNFigure shown having data, e= 100 mm R= 40 mm

Q: A beam with the cross-section given below is subjected to a positive bending moment (causing…

A: Given data- Moment M=16kN-mM=16×106 N-mmDimensions of the cross-section given in the figure.To…

Q: In limit state design method, the moment of resistance for a balanced section using M20 grade…

A: Given- M20 grade concreteHYSD steel grade Fe 415Mu,lim=Kbd2It is needed to find the value of K.

Q: Create a non prismatic beam figure and using Area moment method, find the location and magnitude of…

A: Solution: Non prismatic beam solved using Area moment method:

Q: The torsional assembly shown in the figure consists of a solid 60-mm diameter aluminum [G = 28 GPa]…

A: Given data TB = 9 KNm TC = 9KNm GBr = 45 GPA GAl = 28 GPA

Q: A simply supported concrete beam pre-stressed with a force of 2500 kN is designed by load balancing…

A: Given data- Prestressng force P=2500 kNeffective span=10 mtotal load=40 kN/mTo Find-The central dip…

Q: DETERMINE THE REACTIONS: 6 m 10 kN/m B 25 KN 3 A DIOXO 20 kN/m

Q: 5) If the resultant moment of all forces (P, -P, F and -F) about point A is zero, then the magnitude…

Q: For mechanical tubing with an outside diameter of 90 mm and wall thickness of 5.0 mm, list its…

Q: The concrete (specific weight = 150 lb/ft3) seawall of the figure below has a curved surface and…

A: Given : Profile of the dam : y = 0.21*x2 seawater depth = 24 feet weight of the water over the dam =…

Q: Draw the shear and bending moment of the figure. Solve the maximum shear and maximum moment. Please…

Q: The following information is given for an inorganic soil: Percent passing No. 4 (4.75 mm): 46…

Q: What is the nearest magnitude of strength of a 6 mm fillet weld of 100 mm length made between two…

A: given- 6 mm fillet weld100 mm length2 flats each 10 mm thickallowable shear stress=110 MPa

Q: A canal is proposed to be made in soil having cohesion 25 kN/m2, p' = 0° and void ratio of 0.792 and…

A: Given- Cohesion of soil C=25 kN/m2ϕ'=0ovoid ratio-e=0.792G=2.65Side slope=1:1FOS=2.5Stability no.…

Q: 11. The effective stress friction angle of a saturated, cohesionless soil is 38°. The ratio of shear…

A: Given- Angle of internal friction ϕ=38oIt is needed to find the ratio of shear stress to normal…

Q: Can you please explain and elaborate STEP 5 and how we arrive at the final answer in sentences.

A: Problem Explain the step 5 solved by the previous expert

Q: *4-140. Replace the loading by an equivalent resultant force and specify its location on the beam,…

Q: Determine the velocity and pressure in the pipe

A: Pipe 1 Diameter, d1=10 cm Pipe 2 Diameter, d2=3 cm Diameter of round plate, d3=20 cm Force at which…

Q: 1. List 5 potential hazards in cement processing plant which may include cement dust and chemical…

A: Note:- Hi! Thank you for the question As per the honor code, We’ll answer the first question since…

Question

A tank and a deflector are placed on a frictionless
trolley. The tank issues water jet (mass density
of water = 1000 kg/m³) which strikes the deflector
and turns by 45°. If the velocity of jet leaving the
deflector is 4m/s and discharge is 0.1 m³/s, the
force recorded by the spring will be
Spring
m²t
Tank
45°
Jet of water
Deflector
Tim
Trolley

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

Neglect friction of the 55-Ibf collar against its vertical guide and compute the velocity of the collar after it has fallen 7ft., starting from22 ft/sec. in the position shown below. The unstretched length of the spring is 3ft.
In the cage system below; It is under the effect of a P=250 kN load acting at an angle of θ=75° from the point C. Calculate the horizontal displacement (cm) to the right at point C. (E=2000 kN/cm2 and A=50 cm2 shall be taken for all rods.)
Please solve the unknown forces using Three Moment Equation. Thank you. Wu = 23.2 kN/m L1 = 5m L2 = 6m
The portable floor crane in the automotive shop is lifting a 350-lb engine. For the position shown compute the magnitude of the force supported by the pin at C and the oil pressure p against the 3.58-in.-diameter piston of the hydraulic-cylinder unit AB.Assume a = 5 in., b = 33 in., c = 17 in., e = 36 in., and 26°. C=? LB p=? Lb/in^2
Properties: • b1 = 300 mm • b2 = 180 mm • d1 = 250 mm • d2 = 350 mm • f'c = 28 MPa • fy = 414 MPa • eccentricity = 200 mm Determine the following: 1. Location of the plastic centroid measured from the y-axis in mm 2. Depth of the compression block in mm 3. Nominal Axial in kN 4. Moment Capacity in kN-m
A centrifugal pump which runs at 104.3 rad ·s−1 (16.6 rev/s) is mounted so that its centre is 2.4 m above the water level in the suction sump. It delivers water to a point 19 m above its centre. For a flow rate of Q (m3 ·s−1) the friction loss in the suction pipe is 68Q2 m and that in the delivery pipe is 650Q2 m. The impeller of the pump is 350 mm diameter and the width of the blade passages at outlet is 18 mm. The blades themselves occupy 5% of the circumference and are backward-facing at 35◦ to the tangent. At inlet the flow is radial and the radial component of velocity remains unchanged through the impeller. Assuming that 50% of the velocity head of the water leaving the impeller is converted to pressure head in the volute, and that friction and other losses in the pump, the velocity heads in the suction and delivery pipes, and whirl slip are all negligible, calculate the rate of flow in liter/s and the manometric efficiency of the pump.
Fluid mechanics, i need solutions in 10 minutes please. Q/Q2 The 4 -m- diameter circular gate of Fig. E2.6a is located in the inclined wall of a large reser voir containing water (y = 9.80 kN / m³). The gate is mounted on a shaft along its horizon tal diameter. For a water depth of 10 m above the shaft determine: (a) the magnitude and lo cation of the resultant force exerted on the gate by the water, and (b) the moment that would have to be applied to the shaft to open the gate.
The 100-mm-diameter pulley shown fits loosely on a 10-mm-diameter shaft for which the coefficient of static friction is Determine the minimum tension T in the belt needed to (a) raise the 100-kg block and (b) lower the block. Assume that no slipping occurs between the belt and pulley and neglect the weight of the pulley Choices: A. TMAX = 1075 N, TMIN = 906 N B. TMAX = 1075 N, TMIN = 690 N
SHOW NEAT AND COMPLETE SOLUTION In the mass-pulley assembly shown, determine the velocity of block B at the instant when the velocity of block A is 1 m/s, directed downward.
For the beam loaded as shown in the figure 2, determine the moment reaction at A in kN-m using Conjugate Beam Method. Consider 150 mm x 200 (b x h) mm section and E = 80 GPa. Enter the absolute value only and round-off your answer to 3 decimal places. a = 2.9 m, b = 32.9 kN/m, c = 20 kN.
. A pump draws water from a reservoir and conveys it to another reservoir 30 m above. The sucLon pipe is 100 mm in diameter and 10 m long while the delivery pipe is 100 mm in diameter and 150 m long. if the velocity in the pipe is 3 m/s, the fricLon factor of the pipe 0.008, and the pump and motor efficiencies 85 % and 92 %, respecLvely. See Figure Q6.1. Calculate:(a) Gauge pressure at the pump's inlet (at C) (10)(b) Gauge Pressure at the pump's outlet (at D) (10)(c) input power to motor (5)
An inverted differential manometer is connected to two pipes A and B whichconvey water. The fluid in manometer is oil of specific gravity of 0.8. For themanometer readings r = 30 cm, s = 20 cm and t = 30 cm, find the pressuredifference between A and B.