A three-phase circuit has two parallel connected balanced loads. The first balanced delta load with an impedance of 68.944-j57.85 ohms per phase a d second is a balanced wye load with an impedance of 43.3+j25 ohms per phase. Compute for the total rms line current abd the total real power absorbed by the load if the circuit is supplies by a balanced 600-V source

A three-phase circuit has two parallel connected balanced loads. The first balanced delta load with an impedance of 68.944-j57.85 ohms per phase a d second is a balanced wye load with an impedance of 43.3+j25 ohms per phase. Compute for the total rms line current abd the total real power absorbed by the load if the circuit is supplies by a balanced 600-V source

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.43P: A three-phase line, which has an impedance of (2+j4) per phase, feeds two balanced three-phase loads...

See similar textbooks

Similar questions

A balanced three-phase source having a line voltage of 208-Vrms is supplying two parallel-connected three-phase loads. The first load is a balanced delta of impedance 21 angle 30° ohms per phase and the second load is a balanced wye of impedance 9 angle -60° ohms per phase. Find the magnitude of the rms line current(in Amperes) and the total average power absorbed by the load(in kW).
A balanced three-phase source having a line voltage of 208-Vrms is supplying two parallel-connected three-phase loads. The first load is a balanced delta of impedance 21 angle 30° ohms per phase and the second load is a balanced wye of impedance 9 angle -60° ohms per phase. Find the magnitude of the rms line current and the total average power absorbed by the load.
Given: 1. 2 wye-connected loads per phase to a 3 phase power source 2. first load consists of a 55ohm resistance and a 0.05H inductance per phase 3. second load consumes 1kW and power factor of 0.7 lagging per phase 4. RMS of voltage across the loads are 220V, frequency 120Hz per phase 5. single phase equivalent is shown in the figure: Question: What are the RMS line current at load 1 and 2 respectively?
In a balanced Y-Delta connection the magnitude of the line voltages VL = 1500 V (rms), the load impedance per phase Z= 75 + j33 Ω, and the phase angle of Van = 00. Find the phase voltages, line voltages, phase currents, and line currents. Find also the complex power, apparent power, average power, reactive power, and power factor of the load.
Under balanced operating conditions, consider the 3-phase complex power delivered by the 3-phase source to the 3-phase load. Match the following expressions, those on the left to those on the right. 0) Real power, Py (ii) Reactive power, Qu (ii) Total apparent power Sy (iv) Complex power, Sy (a) (V3 VLL. IL)VA (b) (V3 Vu sng) var (e) (V3 VLL. IL cos ø) W (d) Py +Qy Note that VLL is the rms line-to-line voltage, IL is the ms line current, and o is the power-factor angle.
A positive-sequence balanced three-phase wye-connected source supplies power to a balanced wye-connected load. The line voltage is 100 V rms. The line impedance is 2Ω per phase, and the load impedance is 50 + ?30Ω per phase. Determine the load voltage if ∠Van = 0.
A 3-phase Y-connected load draws power from a 3-phase Y-connected source. The source voltage, ?=440∠0º?_rms and the load impedance, Z_y=(30+j15) Ω. The line impedance, Z_line= (1+j1)Ω and the system operates at 60 Hz. a) Draw the single-phase equivalent circuit and label all given quantities numerically. b) Calculatethe rms line (phase) current phasor in each phase. c) Calculate the total active or real power supplied by the source. d) Calculate the total active or real power consumed by the load. e) Calculate the total line loss i.e. the total activepower lost due to line. f) Determine the power efficiency of the system.
Three symmetrical three-phase loads are connected in parallel. Load 1 is connected in Y with an impedance of 400 + j300Ω / φ, load 2 is connected in with with an impedance of 2400 - j1800Ω / φ and load 3 is evaluated at 172.8 + j2203.2 kVA. Loads are supplied from a distribution line with an impedance of 2 + j16Ω / φ. Size of the voltage between the line and the neutral conductor at the end of the charge the line is 24√3 kV. The operating frequency is 50 Hz.(a) Calculate the line currents and the phase currents of the loads.(b) Calculate the total complex power at the receiving end of the system.(c) Calculate the total complex power at the transmitting end of the line.(d) Calculate the values of the compensation capacitors which are connected from the line to the neuron at the load end of the system so that the power factor at the load end reaches pf ≥ 0.98.(e) What if the capacitors are connected from one line to another? What would be the best choice for compensation, the…
Two balanced loads are connected to a 240-kV rms 50-Hz line. Load 1 draws 30 kW at a power factor of 0.6 lagging, while load 2 draws 45 kVAr at a power factor of 0.8 lagging. Assuming the RYB sequence, determine: (a) the complex, real, and reactive powers absorbed by the combined load, (b) the line currents, and (c) the kVAr rating of the three capacitors ∆-connected in parallel with the load that will raise the power factor to 0.9 lagging and the capacitance of each capacitor. Verify the results by creating a MATLAB Simulink model and program. Obtain the plots for the currents and voltages
Can you please solve the d e f parts? Three symmetrical three-phase loads are connected in parallel. Load 1 is connected in Y with an impedance of 400 + j300Ω / φ, load 2 is connected in with with an impedance of 2400 - j1800Ω / φ and load 3 is evaluated at 172.8 + j2203.2 kVA. Loads are supplied from a distribution line with an impedance of 2 + j16Ω / φ. Size of the voltage between the line and the neutral conductor at the end of the charge the line is 24√3 kV. The operating frequency is 50 Hz.(a) Calculate the line currents and the phase currents of the loads.(b) Calculate the total complex power at the receiving end of the system.(c) Calculate the total complex power at the transmitting end of the line.(d) Calculate the values of the compensation capacitors which are connected from the line to the neuron at the load end of the system so that the power factor at the load end reaches pf ≥ 0.98.(e) What if the capacitors are connected from one line to another? What would be the best…
Given: A balanced-Y load is in parallel with a balanced-D-connected capacitor bank. The Y load has an impedance ZY=(3+j4) Ω per phase, and Its neutral is grounded through an inductive reactance Xn = 2 Ω. The capacitor bank has a reactance XC = 30 Ω per phase.Draw: the sequence networks for this load and calculate the load-sequence impedances.
Consider the circuit shown. Find the following: a. Total load impedance seen by the voltage source. b. Complex power delivered by the source. c. Average power delivered by the source. d. Reactive power delivered by the source. e. Load power factor and power factor angle.