A trapezoidal channel is to carry a discharge of 40m3/sec.. The maximum slope that can be used is 0.0004. The soil is hard. Design the channel as a lined concrete canal with n = 0.013. Use side slope of 1:1, i.e, m = 1.0 The width B (in meters) and depth y (in meters) of the trapezoidal channel is: a. B = 13.58, y = 3.7

A trapezoidal channel is to carry a discharge of 40m3/sec.. The maximum slope that can be used is 0.0004. The soil is hard. Design the channel as a lined concrete canal with n = 0.013. Use side slope of 1:1, i.e, m = 1.0 The width B (in meters) and depth y (in meters) of the trapezoidal channel is: a. B = 13.58, y = 3.7

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A trapezoidal canal has bottom width of 2m and side slope of 2V:3H is laid on the slope of 2 meters per kilometer and has a roughness coefficient n=0.018. Evaluate the normal depth when the flow of waetr is 8.5m3/s.
The slide slope of a trapezoidal open channel are 1 horizontal to 1.75 vertical. The bottom width is 2.5 m and the depth flow is 3m. The coefficient of roughness n=0.015 and the slope of the channel bed is 0.0004. Calculate the velocity of flow using Manning's formula
A trapezoidal channel with side slope of 2H-1V has a flow rate of 160 m3/s and depth of 4 meters. The slope is 1m per kilometer. Determine corresponding bottom width in meters. Answer pls
5 Apply the knowledge of Hydraulics, prove that for a most economical Trapezoidal channel section, the hydraulic depth is half the flow depth and side slope of the section is of 60o.
An unsymmetrical trapezoidal channel with one side inclined from vertical by 35o and the other inclined from horizontal by 40o is to be designed to carry a 2.5 cubic meters per second discharge. Determine the dimensions of the channel for most efficient section if roughness coefficient is 0.025 and average longitudinal slope is 0.05. Draw the cross section of the open channel considering the freeboard height. Use Chezy and Kutter’s C formula.
An open channel is V-shaped, each side being inclined at 45 degrees to thevertical. If the flow rate is 3 m3/s when the depth of water at the centre is 0.52m, calculate the slope of the bed of the channel. Use Manning’s coefficient n =0.013.
The bottom width of a trapezoidal canal is 2.5m and its sides are both inclined at 60 degree with the horizontal. Water flows at a depth of 3m. Calculate the discharge of the slope of the canal is 0.0008 with a coefficient of roughness n=0.03
Determine the depth of the trapezoidal canal with sides sloping at 60ᵒ with the horizontal in order to have a minimum seepage. The canal is to carry a discharge of 25 m3/s with an average velocity of 1 m/s. Note: for minimum seepage = bottom width = 4(depth)(tanθ/2)
Design a straight trapezoidal erodible channel that can carry a discharge of 12.5m^3/s using tractive force method based on the following information. The side slope is 1V:4H The bottom slope is 0.0015 The manning's roughness coefficient is 0.024 The critical shear stress as 7.2KN/m^2 Angle of repose is 23 Density of water 1000kg/m^3
Determine the depth in m of the trapezoidal channel with sides inclined 45 deg with the horizontal to prevent scouring with a maximum velocity of 3 m/s and a flow of 225 cum/sec.
What is the depth of water in a trapezoidal channel with z = 2.0 and carrying 2.5 cubic meter per second of water flow? The channel’s bottom width is 2.5 m and the velocity of flow is 0.9 m/s.
A trapezoidal canal is to carry 45 m³/s with a mean velocity of 0.6 m/s. One side of the canal is vertical and the other has a slope of 2 horizontal to 1 vertical. Find the minimum hydraulic slope, if Manning’s N = 0.013.