A turbine system is harnessing the energy of flowing water from reservoir 1 to reservoir 2. The difference in elevation between the two reservoirs is 120ft. For a design flowrate of 50ft^3/s, the head loss is 30ft. Solve the theoretical power extracted by the turbine. Neglect the difference in atmospheric pressure between the reservoirs. O 402hp O 245hp O 511hp O 281hp

A turbine system is harnessing the energy of flowing water from reservoir 1 to reservoir 2. The difference in elevation between the two reservoirs is 120ft. For a design flowrate of 50ft^3/s, the head loss is 30ft. Solve the theoretical power extracted by the turbine. Neglect the difference in atmospheric pressure between the reservoirs. O 402hp O 245hp O 511hp O 281hp

Sustainable Energy

2nd Edition

ISBN:9781337551663

Author:DUNLAP, Richard A.

Publisher:DUNLAP, Richard A.

Chapter18: Energy Storage

Section: Chapter Questions

Problem 20P

See similar textbooks

Similar questions

Water flows through a 7.5 m diameter penstock on a dam at a flow rate of 113 m3/s. The total head available for the turbine is 18.4 m. The specifiic weight of water is 9810 N/m3. What is the power generated by the turbine?
Pls answer ASAP. A hydroelectric power plant takes in 1060 ft³/s of water through its turbine and discharges it to the atmosphere at 7 ft/s. The head loss in the penstock is 66 ft. Estimate the power extracted by the turbine in horsepower. Show fbd.
The turbine of a hydrostatic plant is driven by a falling head of water from a source 30 m high up through a 600 mm penstock flowing full. a. Evaluate the theoretical velocity of water as it hits the turbing blades in m/sec. b. Evaluate the theoretical discharge of water in m3/s. c. If the turbine is only 70% efficient, estimate the horsepower available from it.
Water flows from an upper reservoir to a lower one while passing a turbine as shown. 1. Compute the total head loss due to friction when the discharge is 150 lit/s. a. 4.25 m b. 3.84 m c. 5.67 m d. 2.54 m 2. Find the velocity of water. a. 2.05 m/s b. 4.12 m/s c. 3.06 m/s d. 6.57 m/s 3. Find the power input of the turbine. a. 213.5 kW b. 210.6 kW c. 115.2 kW d. 356.2 kW
3 .Consider the incompressible flow of an ideal fluid having a density ρ = 1600 kg / m3 (figure 3). We give: P1 = 2 105Pa, P2 = 3 105Pa, V2 = 1 m / s and V1 = 0.5m / s. Determine the net power of the pump to ensure a volume flow Qv = 0.01 m3 / s.
A water pump at elevation 46 m. is used to bring up 250 gpm of water from a river (elev. 45 m.) to reservoir at elevation 100 m. If the suction pipe from the river to the pump is 8 inches in diameter with a head loss of 4 times its velocity head and the discharge pipe from the pump to the reservoir is 6 inches in diameter with a head loss of 25 times its velocity head, determine the output of the pump in horsepower. A. 10.6hp B. 11.6 hp C. 12.6 hp D. 9.6 hp A 3 mm diameter tube is connected in series to a 12 mm diameter tube. Water Flows at 0.5 m/s in the larger tube. Determine the velocity in the smaller tube. A. 6 m/s B. 10 m/s C. 8 m/s D. 12 m/s
Water is discharged through a nozzle having a diameter of jet of 100 mm at a velocity of 60 m/s at a point 240 m. below the reservoir.1. Compute the total head loss.2. Compute the horsepower produced by the jet.3. Compute the power lost in friction
Two reservoirs A and B having elevations 250 m and 150 m, respectively are connected by a 250mm diameter pipe 500 m long. A turbine is installed between the two reservoirs. The flow of water in the pipe is 140 L/s. Use Hazen Williams formula with /(C_1=120/). a. What is the head loss in pipe due to friction? b. What is the head extracted by the turbine. c. What is the power extracted by the turbine in kW.
The flow rate of the hydroelectric power plant in the figure is 50 m3/s, and 2 meters of water column energy loss occurs due to friction in the pipeline. Find the power that water transfers to the turbine. Calculate the theoretical and actual power of the turbine by taking the efficiency of the turbine-generator group, η = 0.92. (Answer: Ntheoric=52 MW and Nreal=48 MW)
A turbine is rated at 600hp when the flow of water through it is 82cu.m/sec. Assuming an efficiency of 92%, what is the head acting on the turbine?
5. Water is pumped 14.5 km from a reservoir at elevation 30 m to another reservoir at elevation 70 m. The steel pipeline connecting the reservoirs has a nominal diameter of 1400 mm (the actual inside diameter is 1372 mm) with C = 90. If the flow is 1.18 m3/s, the pumping efficiency is 82%, and electricity costs $0.14/kWh. Assuming that the density of water is 1000 kg/m3, what will be the monthly power bill? Sketch the hydraulic and energy grade lines.
A powerhouse is equipped with impulse turbines of Pelton type. Each turbine delivers a power of 14 MW when working under a head of 900 m and running at 600 rpm. Find the diameter of the jet and the mean diameter of the wheel. Assume that overall efficiency is 89%, velocity coefficient of jet 0.98, and speed ratio 0.46. (Answer: 132 mm, 1.91 m; respectively)