A two-lane minor road intersects a two-lane undivided major road at 90 degrees, forming a four-leg intersection with traffic on the minor road controlled by a yield sign. A building is located 50 m from the center line of the outside lane of the major road and 14 m from the center line of the nearest lane of the minor road. A passenger car on the minor road would like to cross the major road. Using the AASHTO procedure, determine the maximum speed that can be allowed on the minor road if the design speed on the major road is 80 km/h. Assume a 3% approach grade for the minor road. Note: 1km/hr = 0.62mi/h, 1ft = 0.3048m

A two-lane minor road intersects a two-lane undivided major road at 90 degrees, forming a four-leg intersection with traffic on the minor road controlled by a yield sign. A building is located 50 m from the center line of the outside lane of the major road and 14 m from the center line of the nearest lane of the minor road. A passenger car on the minor road would like to cross the major road. Using the AASHTO procedure, determine the maximum speed that can be allowed on the minor road if the design speed on the major road is 80 km/h. Assume a 3% approach grade for the minor road. Note: 1km/hr = 0.62mi/h, 1ft = 0.3048m

Traffic and Highway Engineering

5th Edition

ISBN:9781305156241

Author:Garber, Nicholas J.

Publisher:Garber, Nicholas J.

Chapter7: Intersection Design

Section: Chapter Questions

Problem 16P

See similar textbooks

Similar questions

A two-lane minor road intersects a two-lane major road at 90° forming a four-leg intersection with trafﬁc on the minor road controlled by a yield sign. A building is located 125 ft from the centerline of the outside lane of the major road and 35 ft from the centerline of the nearest lane of the minor road. Determine the maximum speed that can be allowed on the minor road if the speed limit on the major road is 45 mi/h.
A two-lane minor road intersects a two-lane major road at 90° forming a four-leg intersection with traffic on the minor road controlled by a yield sign. A building is located 125 ft from the centerline of the outside lane of the major road and 35 ft from the centerline of the nearest lane of the minor road. a) Determine the maximum speed that can be allowed on the minor road if the speed limit on the major road is 45 mi/h. b) If the speed limit on the major road were 40 mi/h, determine the minimum distance that the building can be located from the centerline of the outside lane of the major street.
A car hits a tree at an estimated speed of 35 mi/h on a 3% downgrade. If skid marks of 100 ft are observed on dry pavement (F = 0.45), followed by 250 ft (F = 0.20) on a grass-stabilized shoulder, estimate the initial speed of the vehicle just before the pavement skid was begun.
A two-lane minor road intersects with a four-lane major street at 90 deg, forming a 4-leg intersection with traffic on the minor road controlled by a stop sign. The speed limits were 45 mph on the major road, and 25 mph on the minor road. Determine the intersection sight distance (ISD) when a passenger car wants to make a left turn onto the major street. (The grades of both road are low than 3%)
Determine the practical stopping distance (m) for a road with speed limit of 49kph and grade of 0%
Andoks highway can accommodate speed of 80 kph under free-flowing conditions. On average, front bumper-to-bumper spacing of 1.58m is occuring on the highway such that the flow stops completely. Determine the flow of traffic on Andoks Highway if the average speed of the vehicles is 28 kph.
A four-lane divided multilane highway (two lanes in each direction)in rolling terrain has the following additional characteristics:• BFFS of 60 mi/h (100 km/h)• No access points• 12-ft lanes (3.6m)• 8-ft (2.4m) shoulder on the right side and 6-ft (1.8m) shoulder on the left• The peak-hour factor is 0.84• The traffic stream consists of 6% trucks, 4% buses and 3% recreational vehicles.• The driver population adjustment factor is estimated at 0.90.• Analysis flow rate is 1250 pc/h/ln. i) A new urban development will be built in the proximity of this highway section. This development will require the addition of 20 access points per mile (12 access points per km) but all other conditions (geometry and traffic) will stay the same. What is the differential (change) in the average speed (S) before and after the urban development?
A freeway is being designed to carry a heavy volume of 5000 veh/h on a regular weekday in rolling terrain. If the PHF is 0.9 and the traffic consists of 90% passenger cars and 10% trucks, determine the number of 12-ft lanes required in each direction if the highway is to operate at level of service C. The free-flow speed is 70 mi/h, there is no lateral obstruction, and interchanges are 3 mi apart.
A six-lane freeway (three lanes in each direction) in rolling terrain has 10-ft lanes and obstructions (fLW = 6.0 mph) 4 ft from the right edge of the traveled pavement (fLC = 0.8 mph). There are five ramps within three miles upstream of the segment midpoint and four ramps within three miles downstream of the segment midpoint. A directional peak-hour volume of 2000 vehicles (primarily commuters) is observed, with 600 vehicles arriving in the highest 15-min flow rate period. The traffic stream contains 12% large trucks (ET = 2.5) and buses and 6% recreational vehicles (ER = 2.0). What is the estimated free-flow speed of the traffic stream in mph (whole number, nearest 5)? Blank 1 What is the peak-hour factor (3 decimal places)? Blank 2 What is the heavy-vehicle adjustment factor (2 decimal places)? Blank 3 What is the service flow rate (whole number, nearest 5)? Blank 4 What is the service measure value if the average speed of the traffic stream is 65 mph (one decimal place)? Blank 5
A six-lane freeway (three lanes in each direction) in rolling terrain has 10-ft lanes and obstructions (fLW = 6.0 mph) 4 ft from the right edge of the traveled pavement (fLC = 0.8 mph). There are five ramps within three miles upstream of the segment midpoint and four ramps within three miles downstream of the segment midpoint. A directional peak-hour volume of 2000 vehicles (primarily commuters) is observed, with 600 vehicles arriving in the highest 15-min flow rate period. The traffic stream contains 12% large trucks (ET = 2.5) and buses and 6% recreational vehicles (ER = 2.0). What is the estimated free-flow speed of the traffic stream in mph (whole number, nearest 5)? What is the peak-hour factor (3 decimal places)? What is the heavy-vehicle adjustment factor (2 decimal places)? What is the service flow rate (whole number, nearest 5)? What is the service measure value if the average speed of the traffic stream is 65 mph (one decimal place)?
A four-lane undivided highway (two lanes in each direction) has (3.4m) lanes, with (1.2 m) shoulders on the right side. There are 4.5 access points per km, and the posted speed limit is 80 km/h. What is the estimated free-flow speed?
traffic engineering - Q / A freeway is being designed to carry a heavy volume of 5000 veh / h on a regular weekday in rolling terrain . If the PHF is 0.9 and the traffic consists of 90 % passenger cars and 10 % trucks , determine the number of 12 - ft lanes required in each direction if the highway is to operate at level of service C. The free - flow speed is 70 mi / h , there is no lateral obstruction , and interchanges are 3 mi apart .