2. A beam, which is simply supported carriesa uniformly distributed factored load of127 kN/m on a 6.0 meter beam. The baseof the beam is 400 mm, and effectivedepth is 500 mm. Use double leggedstirrups - 10 mm diameter, taking fc' = 27.6MPa, and fy = 414.6 MPa: (UsingSimplified Equation)b) What is the spacing of stirrups at criticalpoint? (DO NOT ROUND DOWN)

Answered: Image /qna-images/answer/7e2bbb18-9b91-4ac9-b101-05f36ae95a31.jpg

a uniformly distributed factored 127 kN/m on a 6.0 meter beam of the beam is 400 mm, and eff depth is 500 mm. Use double le stirrups - 10 mm diameter, takin MPa, and fy = 414.6 MPa: (Usin Simplified Equation) b) What is the spacing of stirrup

a uniformly distributed factored 127 kN/m on a 6.0 meter beam of the beam is 400 mm, and eff depth is 500 mm. Use double le stirrups - 10 mm diameter, takin MPa, and fy = 414.6 MPa: (Usin Simplified Equation) b) What is the spacing of stirrup

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

The service load bending moments actong on a rectangular beam 310 mm wide and 624 mm deep are 58.35 kN-m for dead load and 69.11 kN-m for live load. Use the following properties: f'c = 30.01 MPa fy = 414 MPa p= 0.81 pbal db = 20 mm (bar diameter) ds = 10 mm (strirrups diameter) Consider the stirrups used are spiral stirrups. Calculate the D/C ratio in percentage (%) for the particular beam.
A cantilever beam carries a trapezoidaldistributed load (see figure). Let wB = 2.5 kN/m,wA = 5.0 kN/m, and L = 2.5 m. The beam has amodulus E = 45GPa and a rectangular cross sectionwith width b = 200 mm and depth h = 300 mm.Use the method of superposition and Cases 1 and8 in Table H-1 to calculate the def lection and rotationat B.
express your answer in whole number. A cantilever beam having a span of 12m carries a concentrated load of 8KN at midspan. Using Area Moment Method, the slope at the midspan in terms of EI is - ( ___ )/EI. chegg
The system illustrated below is one of a beam ABCD, for which point A is ahinge, point B is supporting a downward load of 1000N, point C is connected tocable supporting a load of 275 N, point D is roller joint. The system is in static equilibrium, and you are asked to compute the verticalreactions at points A and D, assume that the weight of the beam is negligible. (I need help)
The beam is 7m long with EI = 200MNm^2 Let P = 10 kN Find: 1. Slope at 2m from A. 2. Deflection at 2m from A.
USE 3 decimals; DRAW FREE BODY DIAGRAMS A 9-m simple beam is carrving a uniform load or 25 kN/m over the entire beam with two-point loads of 15 kN at 1.5 m from both ends. If E = 200 Gpa and | = 0.000332 m^4, determine the following using the Double Integration Method:a.) Midspan deflectionb. Deflection at 1.5 m from the eft reaction
A rectangular beam has the following properties: b = 300 mm, d = 350 mm, tension bars As = 4-28mmØ, compression bars As’ = 2-28 mmØ, d’ = 60 mm. Determine the design strength of the beam.a. 233.155 kN.m. c. 636.511 kN.m.b. 332.511 kN.m. d. 755.321 kN.m. Calculate the ultimate axial load capacity of a round spiral column having a diameter of 400 mm reinforced with 6-20 mm Ø bars having fc’ = 24 MPa and fy = 276 MPa. a. 1941.401 kN c. 1841.321 kNb. 9141.401 kN d. 8141.321 kN
QUESTION1) Figure Q1(a) show a simply supported beam of length L = 4.8m is and built for placing Machine and Magnum frame. The combined weight of the machine is approximated by uniform load 90kN/m along x3 = 2.4 m. For of the design, its assumed that the column framed located at a distance x1 and x2 = 0.8m and resulting concentrated load P1 and P2 exerted oneach beam is taken as 150kN and 150kN, respectively. The cross section of beam show as in Figure Q1(b). (a) Determine the bending stress at point a and the maximum bending stress of the beam (b) By referring Figure Q1(a) and consider section n-n, determine the maximum shear stress and the shear stress at point a.
A rectangular beam has the following properties: b = 300 mm, d = 350 mm, tension bars As = 4-28mmØ,compression bars As’ = 2-28 mmØ, d’ = 60 mm. Fc’ = 30 MPa and fy = 345 MPa Determine the design strength of the beam.a. 233.155 kN.m. c. 636.511 kN.m.b. 332.511 kN.m. d. 755.321 kN.m. Calculate the ultimate axial load capacity of a round spiral column having a diameter of 400 mm reinforced with 6-20 mm Ø bars having fc’ = 24 MPa and fy = 276 MPa a. 1941.401 kN c. 1841.321 kNb. 9141.401 kN d. 8141.321 kN Please answer asap.
Answer is 260 mm..don't solve incorrect beam is supported by a roller and a hinge at its extremities. The 2 kN/m is loaded entirely on its 4 m length while 5 kN concentrated load is positioned 2 m from the left end of this beam. If the beam is 80 mm wide, determine the minimum height of the beam if the flexural stress is not to exceed 10 MPa.
Design of Axially Loaded Short ColumnsProblem 7) Design a square tied interior column to carry 3 k/ft2 of uniform live load and 2k/ft2 of uniform dead load (including the self weight of the structure), see Figure 1.(a)Use tributary area approach to calculate the factored axial load, Pu, for the interiorcolumn.(b) Assume g = 2% and determine the required gross cross-sectional area of the columnAg_req.(c)Select the column dimensions (round the width or depth of the column to the nearest 2inches).(d) Back solve for the required longitudinal steel area, Ast_req, and select the minimumnumber of #10 bars placed in all four sides/faces of the column. Use equal number ofbars in all four sides of the column.(e)Select the smallest bar size for ties and design for the spacing of the ties.(f) Sketch the final tie arrangement. Note you must meet the requirements in the ACI 318-11section 7.10.5 (or see McCormac and Brown 9th Ed. Figure 9.4). Place the longitudinalbars at a distance of 3” from the…
Solve for: 1. Maximum W in kN if each leg resist 10.098 kN. 2. If W is 49 kN. what is the force resisting of leg DA? 3. If W is 51 kN. what is the force resisting of leg BA?