Answered: A water tank of cross-sectional area…

Name: A water tank of cross-sectional area 2.5 m2 and height 120 in contains
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: A water tank of cross-sectional area 2.5 m2 and height 120 in contains 1500 (US) gallons of water. If the density of water is 1000 kg/m3, calculate the force on the base of the tank.

Engineering

Mechanical Engineering

A water tank of cross-sectional area 2.5 m2 and height 120 in contains 1500 (US) gallons of water. If the density of water is 1000 kg/m3, calculate the force on the base of the tank.

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter8: Centroids And Distributed Loads

Section: Chapter Questions

Problem 8.100P: The cylindrical water tank with R = 10 ft and H = 1.6 ft has thin steel walls of uniform thickness...

See similar textbooks

Similar questions

Calculate the resultant force caused by the water acting on the parabolic arch dam. The water levels are 16 ft on the upstream side and zero on the downstream side. For water, use =62.4lb/ft3.
One side of the container has a 03-m square door that is hinged at its top edge. If the container is filled with water, determine the smallest force F that must be applied to the bottom edge of the door to keep it closed.
A man weighs 170 lb on the surface of the earth. Compute his weight in an airplane flying at an elevation of 28 000 ft.
The 12-ft wide quarter-circular gate AB is hinged at A. Determine the contact force between the gate and the smooth surface at B due to water pressure acting on the gate. Use =62.4lb/ft3 for water.
The thin-walled cylindrical can with a spherical dimple weighs 0.2 lb. Determine the force P required to push the can into water to a depth of 8 in. Use =0.036lb/in.3 for water.
The hemispherical glass bowl is filled with water. Find the location y of the center of gravity of the filled bowl. Approximate the bowl as a thin shell of radius R=6.15in. Use 1=162lb/ft3 for glass and 2=62.4lb/ft3 for water.
The cylindrical water tank with R = 10 ft and H = 1.6 ft has thin steel walls of uniform thickness and weighs 18000 lb when empty. Determine the depth of the water h for which the center of gravity G of the tank plus water will be located at the surface of the water. For water, use =62.4lb/ft3.
The weight of the cylindrical tank is negligible in comparison to the weight of water it contains (water weighs 62.4lb/ft3). The coefficient of static friction between the tank and the horizontal surface is s. (a) Assuming a full tank, find the smallest force P required to tip the tank, and the smallest s that would allow tipping to take place. (b) If the force P = 200 lb initiates tipping, determine the depth of water in the tank.
Determine the force F required to pull up the 3.54m stopper from the drain of a sink if the depth of water is 10 in. Use =0.036lb/in.3 for water and neglect the weight of the chain.
A glass-walled fish tank is 2 ft wide by 6 ft long by 3ft deep. When the water (y = 62.4 lb /ft^3) in the tank is 2.5 ft deep, determine the magnitude of the resultant force R exerted on a 2- by 3-ft end plate by the water pressure and the distance from the water surface to the center of pressure.
An open cubic tank of side length 2 m is completely filled with water. If the surface of the water and the outside of the tank are subject to atmospheric pressure, what are the hydrostatic forces acting on: Each side of the tank? The base of the tank?
Calculate the pressure exerted by water on the hull of a submarine that is cruising at a depth of 500 ft below ocean level. Assume the density of the ocean water is ρ = 1025 kg⁄m3 .