A Y-connected bulanced three-phase generator with un impedance of 0.4+ j0.3 2 per phase is connected to a Y-connected balanced load with au impedance of 24+j19 2 per phase. The line joining the geucrator and the load has an impedance of 0.6 + j0.7 2 per phase. Assuming a positive sequenee for the source voltages and that Var = 120/30 V. find: (a) the line voltages, (b) the line currents.

A Y-connected bulanced three-phase generator with un impedance of 0.4+ j0.3 2 per phase is connected to a Y-connected balanced load with au impedance of 24+j19 2 per phase. The line joining the geucrator and the load has an impedance of 0.6 + j0.7 2 per phase. Assuming a positive sequenee for the source voltages and that Var = 120/30 V. find: (a) the line voltages, (b) the line currents.

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.47P: Two three-phase generators supply a three-phase load through separate three-phase lines. The load...

See similar textbooks

Similar questions

Consider a three-phase Y-connected source feeding a balanced- load. The phasor sum of the line currents as well as the neutral current are always zero. (a) True (b) False
Consider a single-phase load with an applied voltage v(t)=150cos(t+10)volts and load current i(t)=5cos(t+50)A. (a) Determine the power triangle. (b) Find the power factor and specify whether it is lagging or leading. (c) Calculate the reactive power supplied by capacitors in parallel with the load that correct the power factor to 0.9 lagging.
A balanced Y-connected generator with terminal voltage Vbc 5 200/08 volts is connected to a balanced-D load whose impedance is 10/408 ohms per phase. The line impedance between the source and load is 0.5/808 ohm for each phase. The generator neutral is grounded through an impedance of j5 ohms. The generator sequence impedances are given by Zg0 5 j7, Zg1 5 j15, and Zg2 5 j10 ohms. Draw the sequence networks for this system and determine the sequence components of the line currents.
Suppose you are Mr. Y who is working as an assistant engineer of PGCB. You have studied a wye-wye system during your investigation of a three-phase system. In this system, a Y-connected balanced three-phase generator is connected to a Y- connected balanced load with an impedance of 24 + j19 ohm per phase. The line joining the generator and the load has an impedance of 0.6 + j0.7 ohm per phase. Assuming a positive sequence for the source voltages and that Van = X
Please answer ASAP for like this please it's urgent please Asap.. A balanced star (Y) connected three-phase generator is connected to a star (Y) balanced load whose impedance is (2+2j) Ω per phase. The line that joins the generator and the load has an impedance of (5+2j) Ω per phase. Furthermore, assuming a direct sequence in the generator voltages and that UR = 230∟0º V, determine: 1. The phase currents in the load. 2. Line currents. 3. The phase voltages at the load terminals. 4. Line voltages at source terminals. 5. Value of the line voltages at the load terminals
Circuit theory. Y-connected balanced three-phase generator with an impedance of Zs =0.4+j0.3 ohm per phase is connected to a Y-connected balanced load with an impedance of ZL=14+j31 ohm per phase. The line joining the generator and the load has an impedance of Zl=0.6+j0.7 ohm per phase. Assuming a positive sequence for the source voltages and that amplitude of |Van|=188 and its phase angle 30 degree Find: (a) amplitude of the line voltage Vbc, (b) amplitude of the line current Ic, (c) the complex power at the balanced three-phase load. a. (a) Vb=325.63 V, (b) Ic=5.32 A, (c) S = 84006.67 + j 989.44 VA b. (a) Vb=265.87 V, (b) Ic=3.07 A, (c) S = 14001.11 + j 285.63 VA c. (a) Vb=325.63 V, (b) Ic=5.32 A, (c) S = 9508.07 + j 21053.59 VA d. (a) Vb=265.87 V, (b) Ic=5.32 A, (c) S = 3565.53 + j 7895.10 VA e. (a) Vb=325.63 V, (b) Ic=7.98 A, (c) S = 42003.33 + j 742.08 VA f. (a) Vb=325.63 V, (b) Ic=6.38 A, (c) S = 4754.04 + j 10526.80 VA g. (a) Vb=325.63 V, (b) Ic=5.32…
Can you please solve the d e f parts? Three symmetrical three-phase loads are connected in parallel. Load 1 is connected in Y with an impedance of 400 + j300Ω / φ, load 2 is connected in with with an impedance of 2400 - j1800Ω / φ and load 3 is evaluated at 172.8 + j2203.2 kVA. Loads are supplied from a distribution line with an impedance of 2 + j16Ω / φ. Size of the voltage between the line and the neutral conductor at the end of the charge the line is 24√3 kV. The operating frequency is 50 Hz.(a) Calculate the line currents and the phase currents of the loads.(b) Calculate the total complex power at the receiving end of the system.(c) Calculate the total complex power at the transmitting end of the line.(d) Calculate the values of the compensation capacitors which are connected from the line to the neuron at the load end of the system so that the power factor at the load end reaches pf ≥ 0.98.(e) What if the capacitors are connected from one line to another? What would be the best…
Two single-phase loads are connected in parallel, where load 1 is 4.7 kVA at 0.87 lagging power factor, and load 2 is5.2 kWat0.79lagging power factor. The load combination is connected to a voltage source of220VAC,50 Hz. a) Find the total complex power
Consider a 10 kVA, 200/400 V, 50 HZ: single-phase tranformer has the folloving test results:0.C. test: 200 V, 0.6A, 63 W (L.V.side)S.C. test : 20 V, 25A, 85 W (H.V. side)Deternine:i- The eficiengy at 75 % offiull-load at 0.9 leading power factor.ii -The secondary terminal voltage on fill-load at tunity power facton
Given: A balanced-Y load is in parallel with a balanced-D-connected capacitor bank. The Y load has an impedance ZY=(3+j4) Ω per phase, and Its neutral is grounded through an inductive reactance Xn = 2 Ω. The capacitor bank has a reactance XC = 30 Ω per phase.Draw: the sequence networks for this load and calculate the load-sequence impedances.
The following three-phase circuit is symmetrical, with line voltage 220 V, 60 Hz, direct phase sequence, isolated neutral and the value of the impedances of the loads in the three phases are: Zan = 10 ohms Zbn = -10j ohm Zcn = -10j Ohm Find:a) Phase voltages on the load;b) Line and phase currents;c) The power supplied to the load. Consider the phase voltage in the reference(Va voltage angle equal to 0)
1. A balanced three-phase Y-source with Vph = "224" V rms drives a Y-connected three-phase load with phase impedance ZA " 87" ohm. ZB = "7+J12" ohm and ZC "J61" ohm . Calculate the line currents and total complex power delivered to the load. Assume that the neutrals are connected.