An ISP is granted a block of addresses starting with 180.100.0.0/16. The ISP needs to distribute these addresses to four groups(A,B,C,D) of customer as follows: The group 'A' has 32 customers; each needs 256 addresses. The second 'B' group has 128 customers; each needs 128 addresses. The third 'C' group has 128 customers; each needs 64 addresses. The Fourth 'D' group has 32 customers; each needs 32 addresses. i) ii) iii) iv) Design the Network of ISP for both IPv4 and IPv6(you can choose IPv6 addresses as own) according to above conditions and find out how many addresses are still available after these allocations. Analysis network performance for both networks and take a decision which one is the best.

An ISP is granted a block of addresses starting with 180.100.0.0/16. The ISP needs to distribute these addresses to four groups(A,B,C,D) of customer as follows: The group 'A' has 32 customers; each needs 256 addresses. The second 'B' group has 128 customers; each needs 128 addresses. The third 'C' group has 128 customers; each needs 64 addresses. The Fourth 'D' group has 32 customers; each needs 32 addresses. i) ii) iii) iv) Design the Network of ISP for both IPv4 and IPv6(you can choose IPv6 addresses as own) according to above conditions and find out how many addresses are still available after these allocations. Analysis network performance for both networks and take a decision which one is the best.

Database System Concepts

7th Edition

ISBN:9780078022159

Author:Abraham Silberschatz Professor, Henry F. Korth, S. Sudarshan

Publisher:Abraham Silberschatz Professor, Henry F. Korth, S. Sudarshan

Chapter1: Introduction

Section: Chapter Questions

Problem 1PE

See similar textbooks

Similar questions

An ISP is granted a block of addresses starting with 160.40.0.0/16. The ISP wants to distribute these blocks to 2600 customers as follows. a. The first group has 200 medium-size businesses; each needs 128 addresses. b. The second group has 400 small businesses; each needs 16 addresses. c. The third group has 2000 households; each needs 4 addresses. Design the subblocks and give the slash notation for each subblock. Find out how many addresses are still available after these allocations.
An ISP is granted a block of addresses starting with 150.80.0.0/16. The ISP wants to distribute these blocks to 2600 customers as follows: The first group has 200 medium-size businesses; each needs approximately 128 addresses. The second group has 400 small businesses; each needs approximately16 addresses. The third group has 2000 households; each needs 4 addresses. Design the subblocks and give the slash notation for each subblock. Find out how many addresses are still available after these allocations.
An ISP is granted a block of addresses starting with 129.80.0.0/16. The ISP wants to distribute these blocks to 2600 groups as follows: i. The first group has 200 medium sized businesses; each needs 14 hosts. ii. The second group has 400 small businesses; each needs 6 hosts. iii. The third group has 2000 point-to-point links; each needs 2 hosts. iv. Design the sub-blocks and give the slash notation for each sub-block
An ISP is granted a block of addresses starting with 130.50.4.0/22. The ISP wants to distribute these blocks to 100 organizations with each organization receiving just eight addresses. Design the subblocks and give the slash notation for each subblock. Find out how many addresses are still available after these allocations.
An ISP is granted a block of addresses starting with 129.80.0.0/16. The ISP wants to distribute these blocks to 2600 groups as follows: The first group has 200 medium sized businesses; each need 14 hosts. The second group has 400 small businesses; each need 6 hosts. iii. The third group has 2000 point-to-point links; each need 2 hosts. Design the sub-blocks and give the slash notation for each sub-block. Find out how many addresses are still available after these allocations.
Q) An ISP is granted a block of addresses starting with 150.80.0.0/16. The ISP wants to distribute these blocks to 2600 customers as follows; a) The first group has 200 medium-size businesses; each needs 128 addresses.b) The second group has 400 small businesses; each needs 16 addresses.c) The third group has 2000 households; each needs 4 addresses. Design the sub-blocks and give the slash notation for each sub-block. Find out how many addresses are still available after these allocations.
An ISP has the following block of addresses 132.204.192/20. The manager of this ISP hired you to help him assign IP block of addresses to the following subnets. Subnet A should have enough addresses to support at least 850 interfaces; Subnet B should have enough addresses to support at least 55 interfaces; Subnet C should have enough addresses to support at least 46 interfaces; Subnet D should have enough addresses to support at least 40 interfaces; Subnet E should have enough addresses to support at least 20 interfaces. Subnet F should have enough addresses to support at least 28 interfaces. Give the range of addresses (in binary) assigned to each subnet. Show your work.
A router needs to transmit an IPv4 datagram with a total size of S bytes. The link layer of the router’s output port uses ATM AAL5 standard. Find the number of ATM cells that will be transmitted on this port, and the needed padding bytes, if any, for the following cases: For S = 42140, the total number of ATM cells is cells, and the number padding bytes are bytes. For S = 8871, the total number of ATM cells is cells, and the number padding bytes are bytes. For S = 36211, the total number of ATM cells is cells, and the number padding bytes are bytes. For S = 17752, the total number of ATM cells is cells, and the number padding bytes are bytes.
An ISP (Internet Service Provider) is granted a block of addresses starting with 190.100.0.0/ 22. The ISP needs to distribute these addresses to three groups of customers as follows: a . The first group has 60 customers . b . The second group has 120 customers . c . The third group has 120 customers . Design the blocks and find out how many addresses are sull available after these allocations.
Consider the following diagram: A,B,C and D are subnets, R1, R2, and R3 are routers. Default signifies theentire rest of the internet. All 4 subnets each contain the same number of hosts.Consider the following routing table at R3: CIDR Mask Link 0.0.0.0/0 L4 128.4.6.0/24 L3 128.4.8.0/24 L5 1. If 128.4.6.0 is in A, what is the routing table at R1? 2. The ISP that owns all these networks is short on IP addresses, so theyuse a NAT router for R2. How many public IP addresses will C andD use together assuming they use as many private 10.X IP addresses asthey can? How many total public IP addresses will be used by the entirenetwork? Why doesn’t the ISP care about how many private IP addressesare used? 3. Fix R3’s routing table now that we are using NAT: 4. A node in C is given the IP address 10.0.0.1 and only sends and receivespackets on port 1234. A packet destined for this node reaches R2 witha source of (IP=128.4.6.6, Port=3000) and destination of (IP=128.4.8.0,Port=10000).…
Assume a simple network of two directly adjacent routers. At time T=0 seconds both sent updates (A -> B "can reach 10.0.0.0 with cost 1", B -> A "can reach 20.0.0.0 with cost 1"). At time T=10 second router B exploded and, as a sad consequence, it stopped sending or receiving any packets. Select all statements that are true: - If at T=15s A sends a packet to 20.0.0.1, A will immediately drop the packet - If at T=15s A sends a packet to 20.0.0.1, it will not reach the destination - If at T=125s A sends a packet to 20.0.0.1, A will immediately drop the packet - At time T=125s node A has no knowledge about the route to 20.0.0.0/24 - If at T=185s A sends a packet to 20.0.0.1, A will immediately drop the packet - At time T=185s node A has no knowledge about the route to 20.0.0.0/24 - If at T=305s A sends a packet to 20.0.0.1, A will immediately drop the packet - At time T=305s node A has no knowledge about the route to 20.0.0.0/24
Consider a node called A that sends packets to an adjacent node called B. To control the packet flow to node B, node A employs a credit manager scheme in which parameters C=3(credits), C_max=4(credits) and \tao=6(msec), respectively. node A has an infinite buffer to temporarily store packets. When a packet arrives at node A, node A stores the packet at the bottom of the buffer. Node A also has a single server (transmitter). As soon as the server becomes idle, the server picks up a packet at the head of the buffer, if any, and serves the packet for packet transmission time T_p as far as there remains a credit. (The packet transmission time T_p = 4 (msec).) We observed the arrival times of the first 12 packets, denoted by aA(1)⋯A(12), which were as follows: n A(n) 1 0.5 msec 2 1.0 3 1.5 4 2.0 5 4.5 6 5.5 7 6.5 8 12.5 9 13.0 10 13.5 11 14.0 12 14.6 1. Let R(n) denote the departure time of the n th packet from the buffer for n∈{1,2,...}. Find R(n) for…