Balanced 3 Phase Supply A CC PC S BCN A 90 Balanced 3 Phase Load IN B The 3-phase load consumes a totál power of 42 kW at 0.4 leading power factor. The supply phase sequence is A-B-C. Determine the wattmeter reading (in KW) for different positions of the switch S: Wattmeter reading in position N= kW Wattmeter reading in position B = Wattmeter reading in position C BCN kW kW

Balanced 3 Phase Supply A CC PC S BCN A 90 Balanced 3 Phase Load IN B The 3-phase load consumes a totál power of 42 kW at 0.4 leading power factor. The supply phase sequence is A-B-C. Determine the wattmeter reading (in KW) for different positions of the switch S: Wattmeter reading in position N= kW Wattmeter reading in position B = Wattmeter reading in position C BCN kW kW

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.45P: Two balanced Y-connected loads, one drawing 10 kW at 0.8 power factor lagging and the other IS kW at...

See similar textbooks

Similar questions

A balance 3-phase, inductive delta-connected load is connected to a balance 3-phase, 100V, abc source. Two-wattmeter method is used to determine the total power of this delta load. Wattmeter 1 (W1) and wattmeter 2 (W2) are connected in lines a and c respectively. If W2 reads 900 watts and the power factor of the load is 80%, what will be reading in W1 reading in watts?
A balanced load of phase impedance 100Ω and power factor 0.8 is connected to a400 V, 3-phase supply (a) in star, and (b) in delta. Calculate and compare the powerdissipation in each case.
In a three – phase system with balanced loads, total power using two wattmeter method is given by P1-P2-P3 P1+P2+P3 3⨯ wattmeter reading P1+P2
Q1 Figure 1 shows the online diagram of a three-phase power system. By selecting a common base of 100 MVA and 22 kV on the generator side, draw an impedance diagram showing all impedancesincluding the load impedance in per-unit. The data are given as follows: G: 100 MVA 22 kV x= 0.18 per unitT1: 60 MVA 22/220 kVT2: 40 MVA 220/11 kVT3: 40 MVA 22/110 kVT4: 40 MVA 110/11 kVM: 66.5 MVA 10.45 kVLines 1 and 2 have series reactance’s of 48.4 and 65.43 V, respectively. Atbus 4, the three-phase load absorbs 57 MVA at 10.45 kV and 0.6 power factor lagging.Figure 1x =0.10 per unit x = 0.06 per unitx =0.064 per unit x= 0.08 per unit x =0.185 per unit
Solve all parts or will dislike For the following circuit, the source voltage phasor is: ?s = 250.7∠ -4.16 deg ? a) Calculate the equivalent workshop impedanceb) Deduce the value of the phasor ?c) Calculate the voltage at the workshop terminals using the ohm lawd) Calculate the voltage at the workshop terminals using the law of loopse) Determine the real and reactive powers of the workshop and its power factor solve all parts or will dislike
What is the main direct cause of reactive power in AC system?A. Resistance of transmission linesB. Inductance and capacitance in the loadsC. Ideal transformer connected in the systemD. Power produced by generator2. “Reactive power in a system is dissipated generally as thermal energy?”A. TRUEB. FALSE3. Which of the following statements are correct for three phase circuit:A. Sum of all the three phase currents is zero in unbalanced networkB. Total power transfer to load is constant with timeC. Neutral conductor is same size in terms of material used as in single phase conductorsD. Net apparent power consumed is equal to real power
Given: 1. 2 wye-connected loads per phase to a 3 phase power source 2. first load consists of a 55ohm resistance and a 0.05H inductance per phase 3. second load consumes 1kW and power factor of 0.7 lagging per phase 4. RMS of voltage across the loads are 220V, frequency 120Hz per phase 5. single phase equivalent is shown in the figure: Question: What is the total power drawn from the 3 phase source?
Using two wattmeter method, w2 is connected in line a while w1 is conencted in line c. This is a balanced three-phase inductive load connected in delta and to a 100V abc source. If w2 reads 900W and pf = 0.8, find a. line currents b. reading of w1 c. show the power triangle illustration of the load
Given: 1. 2 wye-connected loads per phase to a 3 phase power source 2. first load consists of a 55ohm resistance and a 0.05H inductance per phase 3. second load consumes 1kW and power factor of 0.7 lagging per phase 4. RMS of voltage across the loads are 220V, frequency 120Hz per phase 5. single phase equivalent is shown in the figure: Question: Give the value of reactive power per phase seen at load 2.
A balanced, three-phase, positive sequence, with grounded neutral source, supplies power to a balanced delta connected load. For the system, additional information are as follows: Vbc = 443 cis 191 degrees volts; and Ic = 10.5 cis99 degrees amperes What is the value of the total real power of the delta load in watts? ANSWER QUICKLY NO DIAGRM NEEDED
Consider a 10 kVA, 200/400 V, 50 HZ: single-phase tranformer has the folloving test results:0.C. test: 200 V, 0.6A, 63 W (L.V.side)S.C. test : 20 V, 25A, 85 W (H.V. side)Deternine:i- The eficiengy at 75 % offiull-load at 0.9 leading power factor.ii -The secondary terminal voltage on fill-load at tunity power facton
A balanced three-phase source with grounded neutral has line-to-neutral voltages of 132.7906 volts with an-bn-cn sequence. This source has an internal series impedance of 0.2+j2.5 ohms per phase. It supplies power to an unbalanced three-phase wye, neutral grounded, load with impedances: Zan = 18-j10; Zbn = 15+j25; Zcn = 20+j30 ohms. If there is a line-to-line fault at lines b and c load-side, what is the magnitude of the fault current in amperes?