Principle of Reinforced/Pre-stressed ConcretePlease provide clear solution. Thank you!Calculate the magnitude of a uniformly distributed load (in addition to the beam’s) which will cause the beam section to begin to crack if it has a simple span of 6m. The beam is made of normal-weight concrete with fc’ = 28 MPa. Calculate the magnitude of a uniformly distributed load (in addition to the beam's) which will cause the beamsection to begin to crack if it has a simple span of 6m. The beam is made of normal-weight concrete with fc' =28 MPa,-250 +250 –250 --1502004-28mmp175755001/1Dimensions are in millimeters

given data bw = 350 mm bb = 500 mm bf = 850 mm h = 600 mm d = h – 75 = 525 mm hf = 100 mm hw = 350…

Answered: Calculate the magnitude of a uniformly…

Engineering

Civil Engineering

Calculate the magnitude of a uniformly distributed load

Steel Design (Activate Learning with these NEW titles from Engineering!)

6th Edition

ISBN:9781337094740

Author:Segui, William T.

Publisher:Segui, William T.

Chapter9: Composite Construction

Section: Chapter Questions

Problem 9.2.1P: A W1422 acts compositely with a 4-inch-thick floor slab whose effective width b is 90 inches. The...

See similar textbooks

Related questions

Q: What will be the fully plastic moment in the portal frame shown in figure? The frame has a uniform c...

Q: Two steel plates each of width 150 mm and thickness 10 mm are connected with three 20 mm diameter ri...

Q: Construct the top view of triangle ABC

Q: Projections: TRUE or FALSE

A: Step: 1 Reference plane: - It is defined as a plane which is used as for drawing and other action. ...

Q: Is surface irrigation possible in a slopping land? I

A: IRRIGATION:

Q: An 80m deep and 100m wide river flows from the left to the right off the page. An action will releas...

A: “Since you have posted a question with multiple sub-parts, we will solve first three sub-parts for y...

Q: Note: Kindly provide a solution pls. The answer is already provided. Thank you! 1.1 A construction ...

Q: PROBLEM 1 P is known to have a value equal to 250 lbs. Using rectangular components, determine (a) t...

Q: A segment of a Class I two-lane highway is on rolling terrain and has an hourly volume of 600 veh/hr...

Q: What will be the tensile strength due to rupture of critical section of an angle section ISA 150 x 1...

Q: determine the maximum load Pu that the system below can carry.

A: The values and given in the question are as follows Yield stress of steel A-50 (E)=50000 psi

Q: • A bin holds three cylinders, each weighing 1200 N. The diameter of each cylinder frictionless surf...

Q: water content

A: Between A and C ,C should be considered for the larger wetted area based on its initial water conten...

Q: Given data : Force%3D3 N Work done=18 Joule Determine displacement

Q: As an environmental engineer, you want to measure the BOD5 of a real wastewater sample. You dilute 3...

Q: How to get the corrected meniscus value?

A: The suspension used in Hydrometer test is opaque, thus the observations are taken at the top of the ...

Q: The beam shown in the accompanying figure is a wide-flange W18 x 35, with a cross-sectional area of ...

A: Given : For a wide-flange W18×35,Cross-sectional area, A = 10.3 in2Depth, D = 17.7 inSecond moment o...

Q: Reaction at support 'B' of the structure shown is P.C B

A: This question is related to Arches from Structure analysis.

Q: A three hinged parabolic arc having a span of 20 m and a rise of 5 m carries a point load of 10 kN a...

Q: cantilever sheet pile 8.20m long is embedded to a depth of 3.20m. It supports dry sand with a dry un...

Q: A soil specimen has an angle of shearing resistance of 28° and cohesion of 31kPa. The shearing stres...

Q: Select one agricultural crop that is widely cultivated in the Japan (ex. Rice, corn, sugarcane, etc....

A: Japan is the largest importer of foods and agricultural products in the world. In 2019, around 7.76 ...

Q: The ratio of shear modulus to the modulus of Elasticity if Poission's ratio is 0.25

A: Given Poisson's Ratio, u = 0.25 To Determine Ratio of shear modulus (G) to the modulus of elasticity...

Q: Determine the (x, y) coordinates of the centroid of the shaded area shown in the figure below. y D-8...

Q: he two 4° wedges plumn under a load L. What is the least value mefficient of friction , for the bott...

Q: alled out at a rate of 75 cm/s. Through how any revolutions will the wheel have turned by e time tha...

Q: 4. For a confined well with 1000gpd withdrawal the draw dawn from several observation well are given...

A: Given data : confined well = 1000gpd Confined well : A well completed in a confined aquifer is refer...

Q: 17. In amortization, accounting technique is used to lower the book value of a loan or an intangible...

A: Answer : option (a) periodically is correct. More about amortization is given in next step.

Q: Of the types of loads imposed on the Member Load (Beam) are: Concentrated Force, Uniform Force Staad...

A: The character of the pressures is largely determined by the building's design and architecture, elem...

Q: 4 KN 2m SKN> C 1.5 A

Q: PROBLEM 1(USING CONJUGATE BEAM METHOD) DETERMINE THE DEFLECTION AT POINTSB AND D 2.5 k/ft Hinge 35 k...

Q: From the figure below, a shaft consists of different sections. Bar (a) is a hollow bar and has an ou...

Q: 40kN 30 B-O b B- 3m 3m 6 m 12

Q: nstructions: Solve the following problems completely using Virtual Work Method. 15 kN/m Problem 2 Gi...

Q: Why Stokes Law only applies if the grain diameter is between 0.0002 mm up to 0.2mm?

A: "Since you have asked multiple question, we will solve the first question for you. If you want any s...

Q: How important is steaming when bending wood part? 2. What could happen if steaming process is not d...

A: 1. How important is steaming when bending wood part? Steaming actually changes the cellular structur...

Q: .19 A high concentrated solution having a volume of 120 liters is mixed by 9% alcohol and 24% gasol...

A: Concentrated solution volume = 120 liters, is mixed with, 9% of alcohol and 24% of gasoline It has...

Q: A box contains 9 gold watches and 7 silver watches, tches were drawn at random. How many methods of ...

Q: For the (4 x 4) pile group as shown in the figure, the settlement of pile group, in a normally conso...

Q: A concrete retaining wall is shown in the figure. The fill behind the wall has a unit weight of 100p...

A: The primary purposes of retaining walls are to assist with forestalling soil disintegration, make us...

Q: Compute the maximum slope and maximum deflection of the cantilevered beam, which is subjected to the...

Q: Determine the force in each member due to dead load, and rain loads.

Q: A W21 x 48 is used as a simply supported, uniformly loaded beam with a span length of 50 feet and co...

A: We have to determine available strength and maximum total service load in kips/ft and flexural and s...

Q: The ratio of shear modulus to the modulus of Elasticity if Poission's ratio is 0.25

Q: % FINER SOIL B SIEVE SOIL A SOIL C 10 83 100 90 40 48 92 76 200 20 86 34 LL 20 70 37 PI 5 32 18 Usin...

Q: wastewater

Q: If the ultimate shear strength of a steel plate is 42,000 psi, What force is necessary to punch a 0....

A: Using formula

Q: Determine the deformation of 1st cable.

A: Given: The modulus of elasticity of the cable is 200 GPa. The cross-sectional area of the cable is 1...

Q: A three hinged circular arch has a span length of L and subtends at the centre of the circular curve...

Q: Establish the Shear & Moment Equation and Diagram of the loaded beam shown. Consider the Left Body D...

Concept explainers

Bars

In civil engineering, bars refer to steel reinforcement bars or rebars. These are structural members primarily used for reinforcement purposes in masonry works. A bar is characterized by its cross-sectional area, which is negligible compared to its length. Bars are usually manufactured by steel which is uniform throughout the length, or by meshing multiple steel wires. Other materials of the bar include carbon steel, glass fiber, carbon fiber, and basalt fiber. The reinforcing bars are coated with epoxy resins and other materials to enhance some of their properties including corrosion resistance.

Question

Principle of Reinforced/Pre-stressed Concrete Please provide clear solution. Thank you! Calculate the magnitude of a uniformly distributed load (in addition to the beam’s) which will cause the beam section to begin to crack if it has a simple span of 6m. The beam is made of normal-weight concrete with fc’ = 28 MPa.

Calculate the magnitude of a uniformly distributed load (in addition to the beam's) which will cause the beam
section to begin to crack if it has a simple span of 6m. The beam is made of normal-weight concrete with fc' =
28 MPa,
-250 +250 –250 --
150
200
4-28mmp
175
75
500
1/1
Dimensions are in millimeters

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

A W1422 acts compositely with a 4-inch-thick floor slab whose effective width b is 90 inches. The beams are spaced at 7 feet 6 inches, and the span length is 30 feet. The superimposed loads are as follows: construction load = 20 psf, partition load = 10 psf, weight of ceiling and light fixtures = 5 psf, and live load = 60 psf, A992 steel is used, and fc=4 ksi. Determine whether the flexural strength is adequate. a. Use LRFD. b. Use ASD.
A simply supported one way reinforced concrete floor slab has a span of 3 m. It carries a service live load of 8.4 kPa and a service dead load of 1.2 kPa, compressive strength of concrete is 20.7 MPa while the yield strength of reinforcement bars is 414.16 MPa. Use 25 clear cover. Unit weight of reinforced concrete is 24 kN/m3. Determine the factored moment in kN-m. Round off your answer to two decimal places.
A simply supported one way reinforced concrete floor slab has a span of 3 m. It carries a service live load of 8.4 kPa and a service dead load of 1.2 kPa, compressive strength of concrete is 20.7 MPa while the yield strength of reinforcement bars is 414.16 MPa. Use 25 clear cover. Unit weight of reinforced concrete is 24 kN/m3. Determine the factored moment in kN-m. Round off your answer to two decimal places. No need to indicate the unit.
A cast iron 3m long is completely filled with concrete and used as a vertical strut. If the externaldiameter of the tube is 450mm and the wall is 35mm thick, determine the maximum compressiveload the composite strut can support if the stress in the concrete is not 2N/mm2? By how muchshould the strut shorten under this load? For cast iron EA= 100GN/m2 and for the concrete EB=10GN/m2?
Calculate the nominal moment strength of a reinforced concrete beam 200mm x 480mm if at failure the concrete compression strain is 0.003 and the tensile steel strain is 0.005. The flexure bars are 20mm in diameter enclosed by 10mm stirrups. Use f'c=20 MPa and fy=420Mpa.
What is the value of the long term deflection for the double reinforced beam having a base of 250 mm, d of 400 mm, As = 3000 mm^2, As' = 1000 mm^2. If the computed value of deflection deadload = 5.50 mm, deflection live load = 10.00 mm, deflection sustained live load = 7.00 mm. The long term deflection to be considered is 8 years.
13. A floor slab 100 mm thick is cast monolithically with beams 250 mm wide 450 mm deep spaced 1.2 m on centers, on simple supports over a span of 5.0 m. The floor supports a service live load of 2.1 kPa. Using ?c= 21 MPa, rebar strength fy = 415 MP, calculate the following if a typical interior beam is reinforced with 3- 16-mm-dia. flexure bars at the bottom enclosed with 10-mm-dia. stirrups: 1. Nominal moment capacity (kN:m) of a typical interior beam in positive bending considering T-beam geometry. A. 96.66 B. 86.99 C. 91.10 D. 81.99 2. Maximum factored uniformly distributed load (kN/m) a typical interior beam can sustain against positive bending. A. 30.93 B. 27.83 C. 26.23 D. 29.15 3. Maximum service superimposed dead load in kPa. A. 17.73 B. 11.08 C. 16.52 D. 14.77
Consider the cantilever beam made of reinforced concrete. Determine if the steel and the concrete withstands loads. In the piece there are 3 steel bars of 16 mm in diameter placed at the top of the section. Consider Econcrete = 25GPa, Esteel = 200GPa, σ (break, concrete) = 35MPa, σ (break, steel) = 500MPa, SFconcrete = 1.4 (safety factor of concrete), SFsteel = 1.15 (safety factor of steel). * TIP: The allowable stress is given by σadm = σrup/SF Compare the maximum values obtained to those allowed by the material. Please show me all the calculations, step by step.
Consider the cantilever beam made of reinforced concrete. Determine if the steel and the concrete withstands loads. In the piece there are 3 steel bars of 16 mm in diameter placed at the top of the section. Consider Econcrete = 25GPa, Esteel = 200GPa, σ (break, concrete) = 35MPa, σ (break, steel) = 500MPa, SFconcrete = 1.4 (safety factor of concrete), SFsteel = 1.15 (safety factor of steel). * TIP: The allowable stress is given by σadm = σrup/SF Compare the maximum values obtained to those allowed by the material. Please show me all the calculations, step by step. Thank you very much in advance.
Reinforce Concrete: A rectangular beam having a width of 300mm has an effective depth of 600mm. Total depth of beam is 680mm. The beam is reinforced with 3 – 32mm rebars at the bottom. Using normal weight concrete and F’c = 27.6MPa, Fy = 415MPa. a. Using detailed calculation, determine the shear strength of concrete subjected to shear and flexure only if it is subjected a factored moment of Mu = 134KN.m which occurs simultaneously with Vu = 223KN. b. If the beam is subjected to a compressive force of 268KN, using simplified calculation, determine the shear strength provided by concrete. c. If the beam is subjected to a compressive force of 270KN, using detailed calculation, determine the shear strength of concrete if Mu = 140KN.m and Vu 240KN.
4. A tied column 300 x 350 mm as shown in the figure is reinforced with 6 pieces steel barshaving fy = 414 MPa and fc’ = 21 MPa as shown in the figure. The column is to resist a factoredload of 1000 kN and factored moment of 230 kNm. Using the interactiondiagram (from the reference textbook: Reinforced Concrete Design DIT Gillesania), determine the following:a. eccentricity, eb. steel ratioc. diameter of the steel bars
please help! upvote will be given. STRENGTH OF MATERIALS The properties of the reinforced concrete beam are b = 309 mm, d = 467 mm, Ast = 1393 mm2, and Est / Eco = 9. If the working stresses are 17.2 MPa for concrete and 119.7 MPa for steel, determine the largest bending moment (in Nm) that may be applied safely. Round off the final answer to three decimal places.