Case Project 8-2 The CNT Books network described in Case Project 8-1 is expanding. There are 200 more user stations in the building, and a total of five floors are in use by the network. You have kept up with the design so far with a network of five subnets, each with its own router. The company leased a building across the street. You expect at least four subnets to be added to the design. The owner is concerned about how to connect to the building across the street, as he thinks the cost of contracting with a communications provider is too expensive for such a short distance. What solution can you suggest for connecting the building across the treet with the existing building?

Case Project 8-2 The CNT Books network described in Case Project 8-1 is expanding. There are 200 more user stations in the building, and a total of five floors are in use by the network. You have kept up with the design so far with a network of five subnets, each with its own router. The company leased a building across the street. You expect at least four subnets to be added to the design. The owner is concerned about how to connect to the building across the street, as he thinks the cost of contracting with a communications provider is too expensive for such a short distance. What solution can you suggest for connecting the building across the treet with the existing building?

Database System Concepts

7th Edition

ISBN:9780078022159

Author:Abraham Silberschatz Professor, Henry F. Korth, S. Sudarshan

Publisher:Abraham Silberschatz Professor, Henry F. Korth, S. Sudarshan

Chapter1: Introduction

Section: Chapter Questions

Problem 1PE

See similar textbooks

Similar questions

You are tasked with designing a network for a company that has offices in four locations: Kentucky, Ohio, Michigan, and Indiana. Each location will be represented by one router and an accompanying PC. The four routers will have point-to-point connections with one another. Design a subnetting plan for this network that meets the following requirements: ⚫ Use the Class C private network 192.168.1.0 for your point-to-point connections. These subnets will all have the same mask. When selecting one, consider the fact that these subnets only need two usable IP addresses; find the smallest mask that will support this. ⚫ Using the Class A private network 10.0.0.0, create a subnetting scheme that uses the least number of IP addresses possible for the following number of hosts in each location: 。 Kentucky: 500 o Ohio: 2000 o Michigan: 1000 o Indiana: 250 ⚫ When dividing the 10.0.0.0 block, please make sure you start from the location with the largest host count to the one with the…
Given a laser color printer whose IP address is 192.135.250.180/24, the network administrator of the company wants you to divide the printer's network into 30 subnets to support 30 project teams such that each team has its own separate network. After re-configuration, the printer will be hosted by a smaller and different subnet. For this particular subnet, what is its possible IP range, from its network IP to broadcasting IP? *Note that these are two special and reserved IPs of the network, they are not a valid host IP and cannot be used by for any hosts of the network. (1) What is the new IP of the printer in CIDR form? (2) How many hosts can connect in each new subnet?
Q3. Consider the following network please see the attached image below for detail work.. Assuming Router1’s MTU is 1300, router2’s MTU is 1500 and router3’s MTU is 1000. IfPath MTU Discovery is used, describe the exchanged packets from source to destinationassuming the source sends initially packets 1600-long packet. You can show themessages on the network diagram. Thank you in advance!
TASK: Build a LAN based on the requirements of the given case, using Cisco Packet Tracer. CASE: An office occupies three 2-storey buildings, namely building A, building B, and building C. Each building is less than 50 meters apart. The office requires a local computer network. The network required is an isolated local network that is not connected to any other network. The office occupies 3 rooms in building A, 2 rooms in building B, and 1 room in building C. In each room there must be at least one printer. The office also needs a server that will later be used as a Samba server. The server must be located in one of the rooms in building A. The maximum number of hosts in the office cannot be more than 200 hosts, and all hosts must be on the same network.
Task 2: Access Control Lists You will need to work out which interface on which router this needs to be applied to. Each ACL must work and be seen to work. Stop any IP address from 10.0.0.128 to 10.0.0.191 from pinging 123.123.123.123 - yet allow all other addresses Creating an ACL that meets the above 'selected' criteria Proving that a change of IP address, other than those allocated to the PC's also demonstrates the operation of the ACL. Also prove that you are still able to ping to 99.0.0.2 irrespective of device IP address
Imagine you are the network administrator of University X having ? campuses in Towson, Maryland. Youwant to build a connected network of servers (each server is either a regular or a routing one), one at each campus,and want to choose some of them to be the designated routing servers. A routing server will serve regular servers whoconnect directly to it via high speed cables, and every regular server must connect to at least one routing server. Yourgoal is to minimize the total length of high speed cable that you must purchase. Given the geographic locations ofthe ? campuses, design a plan that requires (1) the shortest length of cable and (2) the least number of routing servers.Analyze the time and space complexity of your procedure.
An ISP has provided your California based company with the Class A network 15.0.0.0. Devise a fixed-length subnetting scheme that divides this into seven (7) usable subnets. You should assume that all zero's and all one's subnets are not usable.
If we have the network-ID of subnet 127.91.220.100 And as shown in the picture we need to plan network , Rt-A = 2100 hosts , Rt-B= 1000 hosts, Rt-C= 300 hosts, Rt-D = 600 hosts. create suitable subnets from the subnet that was given . NOTE: It is possible to allocate more than one subnet per interface. Create a table for each of the eight networks that contains the network-IDand subnet mask for the subnet/subnets in that network. Net ADD TO ID SUB Network_ID Brodcast SUBNET A1 A2 B C1 C2 D1 D2 D3
Assignment 5: Both TCP and UDP are widely used IP transfer layer protocols. For applications requiring reliable transfers, TCP is generally preferred, while applications that value throughput more than reliability are best served using UDP. Most TCP/IP stacks provide both protocols, so the application can use whichever transfer protocol is more appropriate, even changing from one to the other as desired. Rather than rely solely on TCP, the network system developer might want to investigate the trade-offs related to use of UDP. Based upon the analysis list out why Some TCP/IP Applications Use UDP?
Please draw a sequence diagram for the following scenario. In a network, two nodes communicate with each other. These are the sequence. 1) Node F sends ping message to Node H 2) Node H sends ICMP echo reply to node H. Now Node F is having the MAC address of Node H. 3) Node F starts TCP handshake with Node H by sending SYN message. 4) Node H sends (SYN+ACK) back to node F. 5) Node F sends the ACK to Node H.
Create a WAN design and ensure connectivity between HQ, BRANCH 1 and BRANCH 2 sites. Ensure IP connectivity between sites using a routing protocol. a redundant path should be available from HQ to BRANCH 2 in case of any outage. All sites should be able to ping each sites PC’s (and servers in the HQ. ) Test a link going down between the HQ and BRANCH 1 sites and use traceroute to show the path it travels (to demonstrate the redundant path).
Consider the situation of an employee who is using their computer to send and receive email at their place of employment. However, the mail server is situated on a distinct network from the physical connectivity networks, which are all Ethernet networks. Each of the two networks—the employee's network and the mail server's network—is linked by a single router, which also has a connection to the Internet via the workplace's Internet service provider. Include any protocols that are used and any encapsulation/decapsulation that takes place when data moves between the employee's email client, local mail server, and distant mail servers in your explanation of how the email client communicates with the email server.