Explain in simple words the basic grid setup. (See attached picture) Coal PlantIndustrial Power Plant10Factory= 600 MWno no no nono 10 noCity Networkno no no nono no no 10noFarm≈ 30 MWnonoLow Voltage50 kV= 3 MWsubstationsno19= 400 kW600-1700 MWNuclear PlantExtra High Voltage265 to 275 kV(mostly AC, some HVDC)High Voltage110kV and upRural Network= 150 MW= 200 MW Hydro-Electric PlantTransmission GridDistribution Gridup to≈ 150 MW= 2 MWMedium SizedPower PlantCityPower PlantSolar FarmHYWind FarmIndustrialCustomers

First we have to understand basic functionality of every electricity generation plant. - coal plant-…

Coal Plant = 600 MW O Industrial Power Plant Factory no no no no no 10 ≈ 30 MW City Network no no no no no no 10 10 no Low Voltage 50 kV = 3 MW substations no 600-1700 MW M Nuclear Plant Extra High Voltage 265 to 275 kV (mostly AC, some HVDC) High Voltage 110kV and up = 150 MW = 200 MW Hydro-Electric Plant Transmission Grid Distribution Grid up to 150 MW O = 2 MW Medium Sized Power Plant City Power Plant Solar Farm Industrial Customers

Coal Plant = 600 MW O Industrial Power Plant Factory no no no no no 10 ≈ 30 MW City Network no no no no no no 10 10 no Low Voltage 50 kV = 3 MW substations no 600-1700 MW M Nuclear Plant Extra High Voltage 265 to 275 kV (mostly AC, some HVDC) High Voltage 110kV and up = 150 MW = 200 MW Hydro-Electric Plant Transmission Grid Distribution Grid up to 150 MW O = 2 MW Medium Sized Power Plant City Power Plant Solar Farm Industrial Customers

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.17MCQ: Consider the load convention that is used for the RLC elements shown in Figure 2.2 of the text. A....

See similar textbooks

Similar questions

COURSE: Electrical EngineeringSUBJECT: Electrical ApparatusINSTRUCTIONS:• Write the GIVEN with their respective symbols and units.• Do not skip the SOLUTIONS, do it step-by-step with their respective symbols and units• Round up to 3 three decimal places the FINAL ANSWERS and BOX it. PROBLEM: A source delivers 50 kVA to a load with a power factor of 65 percent lagging. Find the load’s average and reactive powers.
The subject is: Smart Grid Please send the answer by typing ONLY. I don't want any handwritten. Q1- A 3 phase feeder having a resistance of 3 ohms and a reactance of 10ohms supplies a load of 2 MW at 0.85 pf lagging. The receiving end voltage is maintained at 11kV by means of a static condenser drawing 2.1 MVAr from the line. Calculate the sending end voltage and p.f. Also find the voltage regulation and efficiency of the feeder. Assume Delta connected.
AC electrical circuit is below: (refer picture below) a. Determine the current flowing in the load. b. If it is desired that the system power factor be 0.9. With system frequency = 50 Hz. Determine how large the capacitor is must be installed? Which one is correct? A/B/others answer A. C = 7.7015 mF B. C = 35.243 µF c. Please Draw all the phasor. Please give complete, details, and correct answer. Please do step by step, draw the phasor Please using handwriting (not typing ). THANK YOU, I WILL GIVE MANY THUMBS UP.
An impedance coil is connected in series with a fixed resistor, and a 120-V, 50-cyclesource is then impressed across the combination. If the voltage drops across the coil andthe fixed resistor are 70 and 80 V, respectively, when the circuit current is 1.4 A, calculatethe resistance and inductance of the impedance coil. PLEASE ANSWER ASAP
An impedance coil is connected in series with a fixed resistor, and a 120-V, 50-cyclesource is then impressed across the combination. If the voltage drops across the coil andthe fixed resistor are 70 and 80 V, respectively, when the circuit current is 1.4 A, calculatethe resistance and inductance of the impedance coil.
TOPIC: Power Systems, Power Plants & IlluminationINSTRUCTIONS:- Answer in this format: Given, Illustration, Required Conversion, Solution, Final Answer.- Step-by-step solution, do not skip even simple calculations to avoid confusion.- If answered in written form, make sure it is readable.PROBLEM: A generating station has two 50 MW units each running for 8,500 hours in a year and one 30 MW unit running for 1,250 hours in one year. The station output is 650 x 106 kWh per year. Calculate the utilization factor. 0.732 0.653 0.811 0.795
InclassofENG100youwereaskedtoconnectacoilofresistance50Ωand inductance0.318Hwithacircuitcomprisinga75Ωresistorinserieswitha 159µFcapacitor.Andyouconnectedyourresultingcircuittoa240v,50HzAC supply. Calculate: (a)the supply current of your circuit; EV(7) (b)the circuit impedance, resistance and reactance; CR(7) (c)the phase angle of the resulting current,use (sine) as your reference and explain your result. AN(6) Question2
Consider the microgrid of Figure 3.66. A three-phase transformer, T1, israted at 500 kVA, 220 VY grounded/440 V delta, a transformerwith a reactance of 3.5%.Themicrogridis supplied from anAC bus of a PV generating station.The DC bus rated at 540 V.The distributionlineis 10mileslong and has a series impedance of 0.1 + j1.0 Ω per mile and local load of 100 kVA at 440 V. The microgrid is connected to the local power grid using a three-phase transformer T2, rated at 440 V Y grounded/13.2 kV delta,500 kVA with a reactance of 8%. Compute the per unitimpedance diagram of the microgrid system. Assume the voltage base of 13.2 kV on the local power grid side and kVA base of 500
ChatGPT 3.5 You A balanced load is connected in star across a 3 phase 415V 50Hz supply. The load consists of a coil of resistance 25 ohms and inductance 0.5 henry in parallel with a pure resistance of 28 ohms and a pure capacitor of 60 microfarads capacitance ib each branch Calculate I. The line currents Ii. The overall power factor. iii. The power delivered from the supply. iv. The power dissipated in the resistors and coils. v. The current in the neutral supported by a reason why its value is that deduced ?
DEGREE: ELECTRICAL ENGINEERING SUBJECT/COURSE: AC CIRCUITS NOTE: Please solve in this way. 1. Please have a good handwriting, some of the answers are not readable. Thank you! 2. GIVEN.(include symbols and units) 3. REQUIRED/FIND/MISSING (with symbol/s) 4. ILLUSTRATION (Required). 5. STEP-by-STEP SOLUTION with Formulas and Symbols. No Shortcut, No skipping, and detailed as possible 6. FINAL ANSWERS must be rounded up to three decimal places PROBLEM: • A 4200 V, three-phase transmission line has an impedance of 4+j1 Ω per phase. If it supplies a load of 1MVA at 0.75 power factor lagging. Find: a. The complex power b. The powerloss in the line c. The voltage at the sending end
An industrial load of200KW has a powerfactor of 0.5 lagging. Agroup of synchronousmotors operating at apower factor of 0.8leading is installed andthe over-all power factorimproves to 0.75 lagging.Determine the KVArating of the synchronousmotors installed.Answer = 130.2354 KVA
. If a 100 MW coal-fired power plant is replaced by a natural gas plant, what are the before and after annual emissions of: Sulfur dioxide NOx Carbon dioxide https://www.eia.gov/todayinenergy/detail.php?id=44095# (Links para um site externo)