DEGREE: ELECTRICAL ENGINEERING SUBJECT/COURSE: AC MACHINES NOTE: Please solve in this way. 1. Please have a good handwriting, some of the answers are not readable. Thank you! 2. GIVEN. (Include symbols and units) 3. REQUIRED/FIND/MISSING (with symbol/s and units) 4. ILLUSTRATIONS such as diagrams and graphs are Required 5. Step-by-step SOLUTION with Formulas and Symbols. No Shortcut, no skipping, and detailed as possible 6. FINAL ANSWERS must be rounded up to three decimal places with the corresponding units and must be enclosed in a rectangle.

DEGREE: ELECTRICAL ENGINEERING SUBJECT/COURSE: AC MACHINES NOTE: Please solve in this way. 1. Please have a good handwriting, some of the answers are not readable. Thank you! 2. GIVEN. (Include symbols and units) 3. REQUIRED/FIND/MISSING (with symbol/s and units) 4. ILLUSTRATIONS such as diagrams and graphs are Required 5. Step-by-step SOLUTION with Formulas and Symbols. No Shortcut, no skipping, and detailed as possible 6. FINAL ANSWERS must be rounded up to three decimal places with the corresponding units and must be enclosed in a rectangle.

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter6: Power Flows

Section: Chapter Questions

Problem 6.48P

See similar textbooks

Similar questions

Consider a three-phase generator rated 300MVA,23kV, supplying a system load of 240 MA and 0.9 power factor lagging at 230 kV through a 330MVA,23/230Y-kV step-up transformer with a leakage reactance of 0.11 per unit. (a) Neglecting the exciting current and choosing base values at the load of 100 MVL and 230 kV. Find the phasor currents IA,IB, and IC supplied to the load in per unit. (b) By choosing the load terminal voltage IA as reference, specify the proper base for the generator circuit and determine the generator voltage V as well as the phasor currents IA,IB, and IC, from the generator. (Note: Take into account the phase shift of the transformer.) (C) Find the generator terminal voltage in kV and the real power supplied by the generator in MW. (d) By omitting the transformer phase shift altogether, check to see whether you get the same magnitude of generator terminal voltage and real power delivered by the generator.
A long shunt compound DC generator delivers a load current of 150A at 230V and has armature, series field and shunt field resistances of 0.032, 0.015 and 92Ωrespectively. Calculate (i) induced emf (ii) total power generated and (iii) distribution of this power (iv) voltage regulation
A shunt generator supplies a 31kW load at 230V through cables of resistance, R = 122mΩ. If the field winding resistance, Rf =50Ω and the armature resistance, Ra =51mΩ. Determine the following below: The terminal voltage is, Answer and unit for part 1 The e.m.f. generated in the armature is,
a) 3-phase star-connected synchronous generator supplies a current of 10A having phase angle of 20° lagging 400V (phase voltage). Given the direct and quadrature axis reactances as 10ohms and 6.5ohms respectively and neglecting armature resistance, Find: 1. The load angle 2 The direct and quadrature components of armature currents 3. Voltage regulation
a) With the aid of a diagram and phasor diagram, explain the double-reactance concept for salient-pole alternators. b) 3-phase star-connected synchronous generator supplies a current of 10A having phase angle of 20° lagging 400V (phase voltage). Given the direct and quadrature axis reactances as 10ohms and 6.5ohms respectively and neglecting armature resistance, Find: 1. The load angle 2 The direct and quadrature components of armature currents 3. Voltage regulation
Draw voltage phasor diagrams for different load cases of salient synchronous generators and derive the expression of the induced voltage.
A long shunt generator delivers 25kW at 220V. The shunt, series and armature resistances are 50ohms, 0.02ohms, and 0.05ohms respectively, calculate the generated emf.
A 25kVA, 3-phase, wye connected, the 400-V synchronous generator has a synchronous reactance of 1.6 per phase. The generator is to have zero voltage regulation at full-load. Neglecting the armature resistance, find the operating power factor and the developed power.
A 100KVA, 6.6 kV 3 PHASE star connected cylindrical pole synchronous generator has 20-ohm as synchronous reactance and the armature resistance is negligible and the generator is working at the full load and unity power factor then find the value of the induced emf voltage(line to line).
Two generators rated 200MW and 400MW are operating in parallel. The droop characteristics of both the governor have a drop of 4%. from no load to full load. Assuming that the generators are operating at 50Hz at no load, how would a load of 600MW be shared between them? What will be the system frequency at this load? Assume free governor operation.
In a long-shunt compound generator, the terminal voltage is 220 Vwhen generator delivers 110 A. Determine (a) induced emf and (b)total power generated. Given that shunt field, series field,diverter and armature resistances are 90 Ω, 0.025 Ω, 0.04 Ω and0.03 Ω respectively.
A 100KVA, 6.6 kV 3 PHASE star connected cylindrical pole synchronous generator has 20-ohm as synchronous reactance and the armature resistance is negligible and the generator is working at the full load and unity power factor then find the value of the induced emf voltage(line to line). Answer fast