Determine the total quantity of reinforcement for cross section shown below Combined footing of L= 4.5 , B=2.0m, thickness0.40m, concrete cover= 5 cm Column height 3.8 m, diameter 40 cm, concrete cover =4 cm

Determine the total quantity of reinforcement for cross section shown below Combined footing of L= 4.5 , B=2.0m, thickness0.40m, concrete cover= 5 cm Column height 3.8 m, diameter 40 cm, concrete cover =4 cm

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Determine the required reinforcement for L – section beam to resist torsion ? = 10??. ? with the following dimensions; depth of slab = 100 ?? width of flange = 900 ?? width of web = 200 ?? depth = 455 ?? Consider concrete class ?30 and high yield steel ?460 for main Reinforcement and S250 For stirrups
3. A reinforced concrete beam is 0.25m x 0.450 m (b x d). The tension reinforcement provided is 2H25 (As = 982mm2). Determine the moment of resistance of the section if fck = 25 N/mm2 and fyk = 500 N/mm2. 4. By using the information from Q3, calculate the actual area of reinforcement required.
A square footing 2.1 m x 0.31 m thick supports a 300 mm square column at its center. Column loads are service conditions: DL = 389 kN LL = 234 kN f’c = 21 MPa fy = 415 MPa Concrete cover to the centroid of steel reinforcement = 100 mm Calculate the maximum ultimate bending moment in the slab. Write your final answer as whole number with the unit of kN-m.
A spiral column carries a service dead load of 1000 kN and a service live load of 900 kN. fc' = 27.5MPa and fy = 413.5 MPa. Using a steel ratio of 0.03 a. What is the diameter (mm) of the spiral column?b. How many pieces D28 longitudinal reinforcement is required?c. Determine the possible spacing (mm) of the 10 mm spirals assuming a 40 mm concrete cover.
A square tied column carries an axial dead load of580 kN and an axial live load of 850 kN. Assume f’c = 28 MPa andfy = 275 MPa. Use 28 mm diameter bars.Using reinforcement ratio of 2.2%, what is the minimum required dimension of the column rounded to the nearest mm?What is the required number of 25 mm diameter bars?What is the required spacing of 12 mm lateral ties?
A square footing 2.3 m x 0.35 m thick supports a 300 mm square column at its center. Column loads are service conditions: DL= 396 kN LL= 269 kN Pc= 21 MPa fy = 415 MPa Concrete cover to the centroid of steel reinforcement = 100 mm Calculate the nominal one way shear stress in the slab. Write your final answer with 2 decimal places if the unit is MPA
A column 24 in. square, with f'c = 4ksi and fy=50 ksi reinforced with 10 No. 10 bars, As=12.7 square inches, b=9.5 inches and D=7 inches supports a total factored load of 86.57 lb/square feet. Assume size of footing 6'6" X 6'6".The soil (fill) has a unit weight of 100 pcf. The allowable bearing capacity is 2500 lb/square feet.Calculate steel area, dowel steel area, determination of tension length development length and dowel steel requirements.
Three pieces of wood having 1 1/2 in by 1 1/2 in square cross section are glued together and to the foundation as shown. If the horizontal force P = 5 Kips, what is the average shearing stress in each of the glued joints?
Design a circular spirally reinforced concrete column to support a design load Pu= 4893 KN and a design moment Mu=386 KN.m. f = 27.5 MPa and fy = 414 MPa. Show the cross section of the column including the reinforcement details in your solution.
A rectangular beam has a width of 280 mm and an effective depth of 500 mm. It has a reinforcement area of 4072 sq. mm at the bottom. fc' = 25 MPa, fy = 414 MPa. c) Determine the value of "Mu"
for the floor system shown below with assuming that service dead load 3 kN/m?, live load 4 kN/m², Answer the following: 1- Classify the floor system into one way or two-way slab. 2- Check the proposed slab thickness according to deflection and shear requirement. 3- Check the proposed reinforcement at top and bottom in direction shown below. 4- What is the ultimate load transfer from slab and brick wall on beam AB? f = 28MPa , fy = 400MPA and y for brick wall = 17kN/m
a 300 mm thick footing slab supports a 300 mm thick concrete wall carrying uniform service dead load of 214.31 kN/m and service live load of 145.94 kN/m. the base of the wall footing slab is 1.2 m from the ground surface. design parameters are as follows: ysoil = 16 kN/m^3, yconci = 24 kN/m^3. qa = 215.46 kPa. f'c = 27 MPa and fy = 420 MPa. 1. calculate the required center to center spacing of 16 mm bars for flexure if the maximum factored moment in the slab is 75 kN.m a. 150 mm b. 180 mm c. 210 mm d. NOTA 52. calculate the ultimate beam shear stress on the footing slab if the footing slab is 2.1 m wide. a. 1.25 MPa b. 0.74 MPa c. 0.87 MPa d. 0.96 MPa