Phase 1: Addressing the WANS, LANS & VLANSDCEsooGalwayInternetU Servesimuie the irterne10 002)Galway LAN80 hostsGO/O10.00.1/30CorkDCESo/1Nat OutsideBelfastGOODCE ZZ soGO/1200.100.10.64/26Nat InsideLimerick172.31.0.0/23GOOANVLAN VLAN3VLAN99Limerick LAN45 hostsWeb ServerCork VLANSAbout 200 hostsBelfast LAN25 hostsUse the following instructions to complete Phase 1:- Use 172.31.0.0/23 for internal addressing.I Apply /30 subnets on all serial interfaces, using the last available subnet.I Assign an appropriately sized subnet for the Cork LAN, has about 200 devices:VLAN 99: 25 devices (Management VLAN)VLAN 2: 55 hosts (R&D)VLAN 3: 20 hosts (HR)VLAN 4: 100 hosts (Production)- Assign the appropriately sized subnet to the Limerick LAN (45 hosts).Assign an appropriately sized subnet for the Belfast LAN (25 Hosts).I Assign an appropriately sized subnet for the Galway LAN (80 Hosts).- Document the addressing scheme in tables.Addresses will be assigned dynamically to hosts; refer to the DHCP sectiondocument for deils.The

Answered: Image /qna-images/answer/adb361ee-cbcd-42e8-9d50-f00a90e5c3db.jpg

Do fou Phase 1: Addressing the WANS, LANS & VLANS DCE so0 Galway Internet Seve simule rternet 10 0020) Galway LAN 80 hosts S0/0 10.0.0.1/30 s00 Cork DCE S/1 Belfast Nat Outside 200.100.10.64/26 Nat Inside 172.31.0.0/23 GOO DCE ZZ soo GO/1 Limerick Goo VLAN VLAN 99 VLAN Limerick LAN 45 hosts VLAN Web Server Cork VLANS About 200 hosts Beifast LAN 25 hosts Use the following instructions to complete Phase 1: 1 Use 172.31.0.0/23 for internal addressing. I Apply /30 subnets on all serial interfaces, using the last available subnet. 1 Assign an appropriately sized subnet for the Cork LAN, has about 200 devices: VLAN 99: 25 devices (Management VLAN) VLAN 2: 55 hosts (R&D) VLAN 3: 20 hosts (HR) VLAN 4: 100 hosts (Production) I Assign the appropriately sized subnet to the Limerick LAN (45 hosts). Assign an appropriately sized subnet for the Belfast LAN (25 Hosts). I Assign an appropriately sized subnet for the Galway LAN (80 Hosts). Document the addressing scheme in tables. Addresses will be assigned dynamically to hosts; refer to the DHCP section this document for details.

Do fou Phase 1: Addressing the WANS, LANS & VLANS DCE so0 Galway Internet Seve simule rternet 10 0020) Galway LAN 80 hosts S0/0 10.0.0.1/30 s00 Cork DCE S/1 Belfast Nat Outside 200.100.10.64/26 Nat Inside 172.31.0.0/23 GOO DCE ZZ soo GO/1 Limerick Goo VLAN VLAN 99 VLAN Limerick LAN 45 hosts VLAN Web Server Cork VLANS About 200 hosts Beifast LAN 25 hosts Use the following instructions to complete Phase 1: 1 Use 172.31.0.0/23 for internal addressing. I Apply /30 subnets on all serial interfaces, using the last available subnet. 1 Assign an appropriately sized subnet for the Cork LAN, has about 200 devices: VLAN 99: 25 devices (Management VLAN) VLAN 2: 55 hosts (R&D) VLAN 3: 20 hosts (HR) VLAN 4: 100 hosts (Production) I Assign the appropriately sized subnet to the Limerick LAN (45 hosts). Assign an appropriately sized subnet for the Belfast LAN (25 Hosts). I Assign an appropriately sized subnet for the Galway LAN (80 Hosts). Document the addressing scheme in tables. Addresses will be assigned dynamically to hosts; refer to the DHCP section this document for details.

Database System Concepts

7th Edition

ISBN:9780078022159

Author:Abraham Silberschatz Professor, Henry F. Korth, S. Sudarshan

Publisher:Abraham Silberschatz Professor, Henry F. Korth, S. Sudarshan

Chapter1: Introduction

Section: Chapter Questions

Problem 1PE

See similar textbooks

Similar questions

56- A network for a local office requires 4 LAN subnets as follows: · Subnet A - North Office with 31 hosts; · Subnet B - East Office with 15 hosts; and · Subnet C - South Office with 7 hosts. · Subnet D – West Office with 4 hosts. Given the IP Address 192.168.15.0 /24 and above described network requirements: 1. Design an optimal address scheme using Variable Length Subnet Mask (VLSM) method; What will be the subnet mask of Subnet C? Select one: A. 255.255.128.255 B. 255.255.192.0 C. 255.255.255.240 D. 255.255.255.192 E. 255.255.255.128
Answer the questions below about CSMA/CD protocol: i) Fill in the missing words in the gaps of the following text: “In CSMA/CD the ____________ (A) waits K ____________ (B) after a collision, where K is drawn ____________ (C). If you take the last three digits of your QMUL student ID as an example of value for K, the adapter would wait _________ (D) ____ __ (E) that corresponds to ___________ (F) miliseconds for a 5Mbps broadcast channel, ___________ (G) miliseconds for a 100Mbps broadcast channel, and ____________(H) miliseconds for a 1000 Mbps broadcast until returning to the step of sensing the channel.” Note: You are required to write down the gaps numbered A to H and show your calculations.
96. A _______ can check the MAC addresses contained in the frame. a. passive hub b. repeater c. bridge d. router
57- A network for a local office requires 4 LAN subnets as follows: · Subnet A - North Office with 31 hosts; · Subnet B - East Office with 15 hosts; and · Subnet C - South Office with 7 hosts. · Subnet D – West Office with 4 hosts. Given the IP Address 192.168.15.0 /24 and above described network requirements: 1. Design an optimal address scheme using Variable Length Subnet Mask (VLSM) method; What will be the range of usable (assignable) host addresses in Subnet C? Select one: A. 192.168.15.64 to 192.168.15.128 B. 192.168.15.97 to 192.168.15.110 C. 192.168.15.140 to 192.168.15.191 D. 192.168.15.128 to 192.168.15.139 E. 192.168.15.193 to 192.168.15.254
Consider the following non-default subnet masks: (a) 255.255.248.0, (b) 255.128.0.0 . To which IP address class do they pertain?Write down the following in CIDR notation: (a) IP: 150.160.170.180, Subnet Mask:255.255.224.0; (b) IP: 75.80.85.90, Subnet Mask: 255.252.0.0 Three stations A, B, C and D are connected to a common Ethernet hub. Their IPaddresses and subnet mask are respectively: 200.100.50.67, 255.255.255.252;200.100.50.7, 255.255.255.248; 200.100.50.138, 255.255.255.240 and 200.100.50.1,255.255.255.254. Determine which among these stations can communicate with eachother. You need to show all detailed workings.
The following subjects must be covered in detail by you as a network trainer for a major corporation: a. How does a switch go about creating its MAC address table? b. Three stars are given to those who deserve it. A frame is received by the switch, and its intended destination's MAC addresses are found in the database.
Choose a set of class C, /24 addresses that could be successfully combined into a supernet that supports 3000 hosts.
58- A network for a local office requires 4 LAN subnets as follows: · Subnet A - North Office with 31 hosts; · Subnet B - East Office with 15 hosts; and · Subnet C - South Office with 7 hosts. · Subnet D – West Office with 4 hosts. Given the IP Address 192.168.15.0 /24 and above described network requirements: 1. Design an optimal address scheme using Variable Length Subnet Mask (VLSM) method What will be the network address of Subnet D? Select one: A. 192.168.15.232 B. 192.168.15.191 C. 192.168.15.112 D. 192.168.15.240
You are required to thoroughly explain the following topics in your role as a network trainer for a large company: a. What procedure does a switch use to create its MAC address table? (three stars) "B": What transpires if the switch receives a frame and discovers the mac addresses of the desired destination in the table?
1. Which three statements describe differences between Storage Area Network (SAN) and Network Attached Storage (NAS) solutions? Choose three. i. SAN is generally more expensive but provides higher performance ii. NAS uses TCP/IP for communication between hosts and the NAS server iii. NAS requires additional hardware on a host: a host bus adapter for connectivity iv. SAN uses proprietary protocols for communication between hosts and the SAN fabric a. i,ii, iii b. i, ii, iv c. ii, iii, iv d. i, ii, iii
You are required, in your role as a network trainer for a major company, to provide a comprehensive explanation of the following topics: a. What are the steps involved in the process by which a switch builds its MAC address table? (the equivalent of three stars) "B": What will happen if a frame is received by the switch and it finds the intended destination's mac addresses in the table?
Consider the following topology. iMac2 wants to send a file to iMac3. iMac2 knows the destination IP of iMac3. Assuming that the fully configured network has just been switched on, explain the exact process that occurs to send the file from source to destination (only one way). Since many things happen along the way, you only need to address the following in your answer: 1. The appropriate names of the PDU during different stages 2. The ARP table population 3. The MAC table population 4. The usage and role of the IP Routing table (assume that the router already knows all routes to different networks) Hint: This question does not require explanation of the OSI Reference Model or TCP/IP stack. Your answer should be strictly structured in a step-by-step number-point format.