Dry air (79 mol% N2 and 21 mol% O2) is bubbled through a vessel with liquid water to produce moist air at 755 mmHg and 50 °C. The moist air has a wet basis N2 mole fraction of 0.77, while the molar flow rate of N2 is 50 mol/s. Determine the flow rate of moist air in SCMM and mass of water lost from the vessel [kg/h].

Q: A water flow rate of 13.85 kg/s is to be heated from 54.5 to 87.8 °C in a double-pipe heat exchanger...

A: There are some assumptions to be made. All the heat from the hot fluid is transferred to the cold fl...

Q: Last Oct. 6, the temperature in Quezon City was 78°F and the barometric pressure was 29.9 in. Estima...

A: Given: Temperature in the city, T=78°F=25.56°C Barometric pressure, P=29.9 inches=759.5 mmHg Relativ...

Q: It is desired to reduce the 2% CO, in 23 Ib/sec of a natural gas stream using absorption in aqueous ...

A: Given data: Composition of CO2 in natural gas = 2 % Flow rate of natural gas = 23 lb/s Flow rate of ...

Q: At very turbulent flow, which can be assumed?

A: To choose the option that mentions the assumption that can be made in case of very turbulent flow  

Q: Calculate the dewpoint pressure if T = 600F. Components %mass methane 18.13 ethane 3.74 propane 87....

A: COMPONENT MASS MOLECULAR MASS MOLE MOLE%(yi) Vapor pressure (mm Hg) at 60°F Methane 18.13 16 18.13...

Q: A vapor mixture analyzes 68% heptane, 20% octane and 12% propane by volume. At 46.5°C, the mixture i...

A: Given that, The mole fraction of heptane in vapor mixture y1 = 0.68 The mole fraction of octane in v...

Q: A container projectile passage was replaced in September of 2008 with the initial thickness of 750 m...

A: Given that in september of 2008 ,initial thickness ,t1 = 750 mils In Feb 2021 ,actual thickness meas...

Q: Air inside a chamber is heated from an initial volume and pressure of 1.2 ft3 and 1550 psia (Ib per ...

A: Given that  V1 = 1.2 ft3 V2 = 8.3 ft3 P1 = 1550 psia PV1.6 = constant   

Q: Oil flowing at the rate of 5.04 kg/s (cpm = 2.09 kJ/kg · K) is cooled in a 1-2 shell-and- tube heat ...

A:

Q: For the following reaction, 15.3 grams of chlorine gas are allowed to react with 8.06 grams of water...

A: 1. Reaction:Cl2 + H2O →HClO3+ HClwrite balanced equation:3 Cl2 +3 H2O → HClO3 + 5HCl 2. Calculate mo...

Q: Which should be observed in a gas absorption equipment?     The liquid absorbent is below its bub...

A: It is required to determine the phase behavior of liquid absorbent and the gas phase in gas absorpti...

Q: 4-23. A mixture of ethanol (A) and water (B) is separated in a distillation column. The volumetric f...

A: Given data 

Q: The equation of motion is reduced to what equation if the fluid has constant density and viscosity? ...

A: Write the expression for the equation of motion. ρdVdt=−∇→P−∇→.τ+ρg                                 ...

Q: As gas mixture consists of 75% (by volume) methane (CH4) and 25% (by volume) hydrogen sulfide (H2S)....

A: Mass concentration of any substance is defined as the mass of the substance contained per unit of vo...

Q: Ethanol can be produced by the direct hydration of ethylene with H2PO, at 300°C and 6.8 MPa accordin...

A: Given data: Yield of ethanol = 92 % Single pass conversion = 13 % Amount of ethanol produced = 100 k...

Q: Please draw the process flowchart) Ethanol can be produced by the direct hydration of ethylene with...

A: the reaction is  1) CH2=CH2 + H2O → C2H5OH Ethanol can be produced by the direct hydration of ethyle...

Q: A copper concentrator treats 1000 t/day of dry ore with a 3% Cu assay contained in chalcocite (Cu2S)...

A: Given data: Flow rate of feed = 1000 ton/day Composition of Cu in feed = 3 % Recovery rate of copper...

Q: Sherwood Number relates the mass transfer coefficient to mass difusivity. It is known to be proporti...

A: Note: We are authorized to answer one question at a time, since you have not mentioned which questio...

Q: Calculate the flow of the liquid and vapor phases.

A: Two phases coexist in a mixture when the flash temperature lies between the bubble point of mixture ...

Q: A flue gas analysis shows 12.4% CO2, 3.1%CO, 5.4% O2, and 79.1%N2. All the hydrogen but only 85% of ...

A: Given Data : Take basis  of flue gas = 100 Kmole  Moles of CO2 = 12.4 Kmoles Moles of CO = 3.1 Kmole...

Q: Assuming Raoult’s law to apply to the system n-pentane(1)/n-heptane(2). a. What are the values of...

A: a) The Antoine equation for n-pentane (1) and n-heptane (2) is givne as follows: lnP1sat = 13.7667-2...

Q: 2. What is the new electron configuration? [ Select ] 3. I V [ Select] 1s^2 2s^1 4. I [He] 2s^1 1 1s...

A:

Q: A liquid (u = 0.012 lb s/ft?, p= 1.79 slugs/ft) flows through the annular space between two horizont...

A: Given that  u = 0.012 lbs/ft2 density = 1.79 slugs/ft3 ri = 1.5 in   ro = 2.5 in  Q = 0.14 ft3 /s  

Q: In the derivation of the equation of motion, the "no-slip" condition is no longer valid and consider...

A: To state whether the given statement is true or false

Q: One strategy for dealing with the acidification of lakes is periodically to add powered limestone (C...

A: Carbonate balance plays an important role in the environment, irrespective of land or aquatic region...

Q: Problem 3 A 1:3 ratio of nitrogen and hydrogen react catalytically at high temperature and pressure ...

A: Question: Answer: According to our company guidelines,we need to answer the first question please re...

Q: Mean Temperature Difference in an Exchanger. A 1-2 exchanger with one shell pass and two tube passes...

A: Given, T1=315.6oC, T2=148.9oC t1=37.8oC, t2=121oC ∆Tlm=(T2-t1)-(T1-t2)/ln(T2-t1)/(T1-t2) ∆Tlm=(194....

Q: . A 100 kmol/h stream that is 97 mole% carbon tetrachloride (CCl4) and 3% carbon disulfide (CS2) is ...

A: Given: amount of the feed stream, F=100 Kmol/h mole fraction of CCl4 in Bottom, xAW=0.97 mole fracti...

Q: Why do you need chemical engineers?

A: given that  why chemical engineer is need

Q: 1.a ) If two bituminous samples have the same consistency , describe the criteria which can be used ...

A: Introduction Bitumens are viscoelastic materials without sharply defined melting points; they gradua...

Q: Some hypothetical metal has simple cubic crystal structure. If its atomic weight is 67.1 g/mol and t...

A: Given that Atomic weight,A = 67.1 g /mol  Atomic radius,r  =0.135 nm  NA = 6.022 x 1023 ( atoms/mol)

Q: A pure saturated hydrocarbon is burned in excess air. Air is supplied at the rate of 284.14 m3/kgmol...

A: Given data: Air is supplied at the rate of 284.14 m3/kmol of the hydrocarbon Air enters at 30oC, 1 a...

Q: x (mole) y (mole) 9000 L/min of a gas mixture containing 30% NH3, 70% Air by mole shall be treated i...

A: Given data: Volumetric flow rate of gas = 9000 L/min Composition of NH3 in gas stream = 30 % Air = 7...

Q: 2 Identify P&I LINE SIGNALS: LL

A: P& I line signals for giving diagram

Q: The following reactions take place in a continuous reactor at steady state (i.e., equilibrium!). A f...

A: (a) The following reaction take place in continuous reactor. C2H6→C2H4+H2                           ...

Q: (Just draw the process flowchart only, label properly) Ethanol can be produced by the direct hydrat...

A: Given that  Ethanol can be produced by the direct hydration of ethylene  CH2=CH2 + H2O → C2H5OHThe f...

Q: For tlowing water, what is the magnitude of the velocity gradient needed to produce a shear suress o...

A: Dear Subscriber, Since you have posted Multiple qns. ,we are going to solve only first question Acco...

Q: The gas phase reaction between methane (A) and sulfur (B) was carried out in a plug flow reactor (RA...

A: Given that The gas phase reaction between methane (A) and sulfur (B) was carried out in a plug flow ...

Q: An experiment is conducted to determine the variation of the diffusion coefficient as a function of ...

A: The diffusivity coefficient is a proportionality constant relating molar flux and the concentration ...

Q: If moist hydrogen containing 5% water by volume is burnt completely with 34% excess air, calculate t...

A: Given that, Fuel: Moist hydrogen (H2 + H2O) Mole fraction of H2O in the fuel = 0.05 Mole fraction of...

Q: The combustion gases from an industrial furnace using a hydrocarbon fuel and dry air enter the stack...

A: GIVEN DATA: Orsat analysis: 12.2% CO2, 3.1% O2, 1.2% CO, and 83.5% N2 Basis: 100 kmol of stack gas ...

Q: Question 5 Which of the following reference entries is correctly formatted? Anderson, M. (2018). Get...

A: Q5 ans) APA style of reference differ from journal to book if it is journal  Author name is followed...

Q: 2. Methane gas is combusted with air, supplied in 25% excess. Calculate the maximum attainable tempe...

A:

Q: Consider the reaction Fe,0,(s) + 3H,(g) – 2Fe(s) + 3H,O(g) a. Use AG¡ values in Appendix 4 to calcul...

A: Consider the given reaction. Fe2O3s+3H2g→2Fes+3H2Og                                 ....... (1) Writ...

Q: (a) CO;(g) + H;(g) =cO«) + H,O{) (b) SnOz(s) + 2 COg) = Sn(s) + 2 CO(g)

A:

Q: [References] The rate law for the decomposition of phosphine (PH3) is A PH,] Rate =- = k[PH,] At It ...

A: The rate law of the reaction taking place is given. from the rate law, it can be seen that the react...

Q: Sample problem A cylindrical iron sample (height to diameter ratio is 2:1) is heated to 97.5°C, then...

A: Given Data:  Given the height to diameter ratio of the cylinder HD =21 Temperature of the cylinder (...

Q: Assume the validity of the De Priester charts, make the following VLE calculations for ethane (1)/ ...

A: Given that ethane 1 propane 2 isobutene (3) isopentane (4) BUBL T, given x1 = 0.27, x2 = 0.33, x3 = ...

Q: Ethanol is produced by the hydration of ethylene: CH2=CH2 + H2O  C2H5OH Some of the product is conv...

A: Given that  The conversion of ethylene is 10%  yield is 90%

Q: A pipeline initially has a thickness of 620.5 Mils, after a period of 2 years and 5 months, corrosio...

A: