et's say that you are given a network address block as 192.168.16.0/24, and are asked to divide it into five different networks. The largest network will have 80 hosts. What would be the subnet mask for this network Da255.255.255.0 or / 24 Ob.255.255.255.252 or /30
Q: Consider a fixed subnet partition of the class A network 104.0.0.0. a. How many bits will be…
A: Note: in Class A network:first 8 bits are network bitsand last 24 bits are host bits in subnet mask…
Q: Assuming a subnet mask of 255.255.248.0, which three addresses are valid host addresses? (Choose 3)
A: Correct Option are: 172.16.9.0 172.16.20.0 172.16.31.0
Q: After establishing a connection with the local DNS server PC1 now knows the IP and MAC addresses of…
A: Below is the answer to above question. I hope this will be helpful or you...
Q: Given an address of 200.10.10.0 with a needed usable host of 16, What is the 7th subnet range?
A: The question is given an address of 200.10.10.0 with a needed usable host of 16, What is the 7th…
Q: You have been allocated a class B network address of 129.0.0.0. You need to create at least 20…
A: Given Class B network is 129.0.0.0/16 Here the required number of networks are,at least 20…
Q: how many subnet bits you need as well as the new prefix.
A: Subnetting is the process of dividing a single network into multiple sub network. IP address that in…
Q: In a class A subnet, we know the IP address of one of the hosts and the subnet mask as given below:…
A: Given: IP Address: 25.34.12.56 Subnet mask: 255.255.0.0 What is the first address (subnet…
Q: Consider a class C network with the subnet mask 255.255.255.41. How many network and host id (HID)…
A: The answer is...
Q: A network administrator wants to place 15 subnets on a /23 network. How many bits would be in the…
A: It is /23 network, which means network id =23 bits and host id= 9 bits (23+9=32) Now the network…
Q: 192.168.30.10o 192.168.70.1 192.168.2.2 192.168.0.2 Question 1: The subnet mask in the following…
A: In the given network 4 routers, 6 switches and each switch is connected to 1 or 2 hots. Based on the…
Q: Given the network 192.168.100.0/24, we are going to segment this network into two subnets, Subnet A…
A: Given:- The Network is 192.168.100.0/24
Q: Assume that a computer transmits a packet to another computer on the Internet at the network layer.…
A: Introduction: Transmission Control Protocol/Internet Protocol (TCP/IP) networks use data packets to…
Q: Homework: Draw a network with the following specifications: (a) Two ring networks with four hosts…
A:
Q: Given a subnet mask of 255.255.255.192 for a C Class network, there will be how many bits for subnet…
A: The following is the solution
Q: An IP address can be written as a 32-bit number. For a class B network, the two most significant…
A: The answer to this question and its explanation is present in the image attached.
Q: VLSM Problem 1. Based on the number of hosts in the topology, you need to calculate the NIDS and…
A: 210.15.10.0 is a class C IP address where number of network bits is 24. So number of host bits is 8…
Q: Consider the router and the two attached subnets below (A and B). The number of hosts is also shown…
A: Given network is shown below Here two subnets Subnet A and subnet B and these subnet share the…
Q: Given a network address of 198.100.10.0 and 60 needed usable host per subnet, determine the…
A: Given a network address of 198.100.10.0 and 60 needed usable host per subnet, determine…
Q: Consider the IP address : 157.110.88.0. We need 30 subnets in such a way that each subnet may host…
A: As per bartleby guideline: “Since you have posted a question with multiple sub-parts, we will solve…
Q: Can you find any problem with the following statement? "In a network (let Network Address…
A: Given: "In a network (let Network Address 101.10.0.0/25 is using for 120 hosts network) a station is…
Q: Consider the following non-default subnet masks: (a) 255.255.248.0, (b) 255.128.0.0 . To which IP…
A: As per our guidelines only 3 sub parts will be answered. So please repost the remaining questions…
Q: Design a classfull network addressing scheme that will supply the minimum number of hosts per…
A: From the Given problem description we see that the ip address : 172.16.0.0 Below are the steps we…
Q: Suppose you are subnetting a class-C network address 192.168.75.0 for 45 usable host addresses. What…
A: For class C subnet, number of network bits is 24 and number of host bits is 8. For subnet we need to…
Q: Can you find any problem with the following statement? Explain. " In a network (let Network Address…
A: To find the network id of an IP address, we need to do AND operation with subnet mask and IP…
Q: Consider a class C network with the subnet mask 255.255.255.41. How many network id (NID) and host…
A: In class C 24 bit network bit and 8 bit are host bit. Subnet mask : 255.255.255.41 in binary:…
Q: For example, let say that your Network 1 needs 30 hosts and you are in a class C network, you would…
A: Part(A) Class A address range is from 0-127. The value of the subnet mask for Class A 255.0.0.0.…
Q: For a network address of 10.0.0.0/16, find default class, subnet mask, total number of valid hosts…
A: Given network address is: 10.0.0.0 /16 To find: 1. Default class 2. Subnet mask 3. total number of…
Q: 21.) Consider the following configuration. Computer “A” IP address:…
A: Explanation: Computer A uses the subnet mask of “255.255.0.0”, from this one can identify that it…
Q: We are going to use the private range for a class A network. What is its standard subnet mask? We…
A: Answer: Our guidelines is answer first three question from first question. we have answered the…
Q: Qno 9: Suppose two hosts (Host-A and Host-B) are connected through a shared Ethernet bus of 1 Mbps.…
A: Given:- Suppose two hosts (Host-A and Host-B) are connected through a shared Ethernet bus of 1 Mbps.…
Q: if we have the IP address 192.168.1.0 /24 (class C address) with the pllowing requirements 1. Subnet…
A:
Q: You are asked to create equal-size subnets in the 205.33.44.0 network using subnet mask…
A: Given IP address is 205.33.44.0 Subnet mask= 255.255.255.224(/27) Number of network and subnet…
Q: Given a subnet mask 255.255.255.240. What will be the subnet address for a host with IP 200.10.5.68?…
A: Given a subnet mask 255.255.255.240. What will be the subnet address for a host with IP 200.10.5.68?…
Q: Assume: Your laptop's Ethernet address is 0a:0b:0c:0d:0e:0f, DHCP server address is 131.111.7.3,…
A: Answer: I have given answer in the handwritten format.
Q: rk address of 198.125.50.0 with a needed usable host of 45, What is the custom subnet mask for this…
A: the solution is an given below :
Q: Design a classfull network addressing scheme that will supply the minimum number of hosts per…
A: In the given network diagram , we have three departments Administrative with 30 hosts Marketing with…
Q: Let's say that you are given a network address block as 192.168.16.0/24, and are asked to divide it…
A: The answer is..
Q: A company is granted the site address 111.0.0.0 The company needs 1025 subnets, how many addresses…
A: Question 1: Site Address given : 111.0.0.0 It belongs to Class A Network where network id = 8 bits…
Q: This problem has two parts: Part-1: A network administrator is given an IP address block where one…
A: The given address is 106.83.251.102/17 Here /17 means number of network bits is 17 and number of…
Q: Given an address of 200.10.10.0 with a needed usable host of 16, What is the custom subnetmask for…
A: The IP given above is an IPv4 and each of the digits can be between 0-255 which means 8 bits to…
Q: a) Let us say n bits are reserved for host part in a subnet/network address, write down formula to…
A: Since you have posted a question with multiple sub-parts, we will solve first three sub parts for…
Q: Q1. Given that Number of needed subnets:10 Network Address: 192.70.10.0 What is: Address class:…
A:
Q: Given a network address of 220.100.100.0 with a needed usable host of 28, What are the assignable…
A: The Classless IP subnetting of 220.100.100.0 begins from the fourth octet of the IP address. To get…
Q: You need to subnet a class C network that has 5 subnets, each with at least 16 hosts. Which classful…
A: You need to subnet a class C network that has 5 subnets, each with at least 16 hosts. Which classful…
Q: What is the network address and subnet mask of the hidden subnet (xxXx.xXxx.XXXX.XXXX/Xx) subnet?…
A: GIVEN DATA
Q: Part 1 A new school network is being installed. There are Three classrooms with 61 computers each.…
A: Subnet 1 : Network Address : 63.92.141.128 Subnet Mask : /26 First Usable Host Address :…
Q: Using packet tracer, implement a network that has the following components: 1- At least five routers…
A:
Q: Given a network address of 218.35.50.0, 5 needed subnets, determine the following and Fill up…
A: Bartleby allows experts to answer only one question at a time. So first question will be answered…
If post copied or other site answers sure take strict action
answer only 100% sure
Step by step
Solved in 2 steps
- An IP address can be written as a 32-bit number. For a class B network, the two most significant bits are set to 10. The 16 most significant bits are used as a network ID, and the 16 least significant bits are used as a host ID. However, the host ID cannot be all 0's or all 1's. How many hosts (i.e., host IDs) can there be on a class B network?An IP address can be written as a 32-bit number. For a class B network, the two most significant bits are set to 10. The 16 most signi cant bits are used as a network ID, and the 16 least signi cant bits are used as a host ID. However, the host ID cannot be all 0's or all 1's. How many hosts (i.e., host IDs) can there be on a class B network?Computer Science In Python, I am trying to make a client and server code that passes the payload with the requirements. The client has to specify the length of the data packet, up to max, specify how many times to pass the data packet, and specify the server IPv4 address. Both the client and the server need timer functions and compute the time needed to perform the number of sends both the Client and the server need to display the local and remote IPv4 addresses, total time, and bytes per second. Please help, Thanks.
- Berkeley Computer Science example (CS-168): Picture this: there are two hosts (A and B). The two hosts are connected by 50 msec of propagation delay. The bandwidth is equal to 106 B/sec. Note that the hosts use a sliding window where (W = 4, and packet size = 1000 Bytes) with (Selective Repeat). We will ignore the size of ACK and assume that the timer value for each packet is set as (send time + RTT) and retransmission occurs immediately after a timer expires. Make sure to assume that the packets are sent in sequence starting at time 0. How long does it take to successfully receive all 4 packets (P_0, P_1, P_2, P_3). Your answer should be in milliseconds. 1. When there is no packet loss. 2. When the P_1 packet becomes lost, but there is no further packet lossConsider the following non-default subnet masks: (a) 255.255.248.0, (b) 255.128.0.0 . To which IP address class do they pertain?Write down the following in CIDR notation: (a) IP: 150.160.170.180, Subnet Mask:255.255.224.0; (b) IP: 75.80.85.90, Subnet Mask: 255.252.0.0 Three stations A, B, C and D are connected to a common Ethernet hub. Their IPaddresses and subnet mask are respectively: 200.100.50.67, 255.255.255.252;200.100.50.7, 255.255.255.248; 200.100.50.138, 255.255.255.240 and 200.100.50.1,255.255.255.254. Determine which among these stations can communicate with eachother. You need to show all detailed workings.A network configuration of a modem is given as following:LTE interface IP = 77.110.156.22 MASK 255.255.252.0Default GATEWAY = 77.110.156.1Masquerade NAT, and DNS address = 1.1.1.1Local IP setup: 192.168.128.1 MASK 255.255.255.0And, ip route 192.168.128.0 255.255.252.0 192.168.128.254 Devices numbered R1, R2, R4, R5 are routers. PC is a computer.Image of network with interface names such as f1/0 are added. You must use only static IP addreses and static IP routes to configure the network and make PC able to connect (ping) to Modem.
- Given a Class C subnet Mask 255.255.255.192. what will be the subnet address and host number for a machine with IP address 197.1.2.67. Select one: a. second subnet and host 2 b. Third subnet and host number 3 c. second subnet and host 4 d. First subnet and host number 3 e. None f. Second subnet and host number 3. Assume: Your laptop's Ethernet address is 0a:0b:0c:0d:0e:0f, DHCP server address is 131.111.7.3, your IPv4 address will be 131.111.7.121, the gateway's IP address is 131.111.7.1, and Ethernet address is 00:01:02:03:04:05, the network subnet mask is 255.255.255.0.Write the series of protocol/packet exchanges that occur on the wired Ethernet link, up until you can send a single packet to 128.232.0.20. You do not need to describe packets after this packet has left the link. Include ARP and DHCPWrite a program by c programming language for VLSM calculator Input will be: 1) Input by user - IP address[sample- IP address - 192.168.1.10/24]2) Input by user - How many LAN/Networks in your topology [number of 'n'. n can be any numbers]3) Input by user - How many Host/computers in each LAN/Networks [number of 'n' in each topology. n can be any numbers] Output will be:1) Network address with subnet mask, first assignable address, last assignable address, broadcast address and gateway address for each LAN/Networks. Sample Input example for your understanding:- sample IP address - 192.168.1.10/24 ------------------------------------------ 1st LAN/Network : 258 Host/Computers2nd LAN/Network : 200 Host/Computers3rd LAN/Network : 120 Host/Computers...'n' times LAN/Network : 'n' Host/Computers Output example for your understanding:- ----------------------------------------- 1st LAN/Network : [Network address with subnet mask]1st LAN/Network : [first assignable address]1st LAN/Network :…
- Write a code for VLSM calculator by c programming languageInput will be: 1) Enter IP address [sample- IP address - 192.168.1.0/22]2) How many LAN/Networks in your topology [number of 'n'. n can be any numbers]3) How namy Host/computers in each topology [number of 'n' in each topology. n can be any numbers] Output will be:1) Network address with subnet mask, first assignable address, last assignable address, broadcast address and gateway address for each LAN/Networks. Sample Input example for your understanding:- sample IP address - 192.168.1.0/24 ------------------------------------------ 1st LAN/Network : 258 Host/Computers2nd LAN/Network : 200 Host/Computers3rd LAN/Network : 120 Host/Computers4th LAN/Network : 20 Host/Computers5th LAN/Network : 56 Host/Computers...'n' times LAN/Network : 'n' Host/Computers Output example for your understanding:- ----------------------------------------- 1st LAN/Network : [Network address with subnet mask]1st LAN/Network : [first assignable…Write aprogram to find the ip dotted decimal notation conversion from decimal to binary,octal and hexadecimal and vice versa also find the result of NOT and AND operation of ipv4 adresses. a. 114.34.2.8 Find the result of each operation: a. NOT (22.14.70.34) Find the result of each operation: a. (22.14.70.34) AND (255.255.0.0) ALso develop a program to find classes of ip adress and first and last address,subnet mask also. Develop in javaUsing packet tracer, implement a network that has the following components: 1- At least five routers 2- At least 7 subnets 3- At least 12 PCs 4- At least 4 switches 5- Use RIP routing protocol To assign IP addresses of the routers and PCs, use the IP address from your ID as follows Assume your id is 118zyxw, Consider the numbers z, y, x and w as deciemal You have the subnet 118.0.0.0/24 If your ID is 1181234 then the IP is 118.0.0.0/24 Use this subnet to get at least 7 subnets.