Ex3:A doubly reinforced rectangular section has width (280mm) and effectivedepth (510mm) and d'-(Somm) and A, = 2946mm? ,A', = 1207mm?f' = 34.5Mpa,fy = 414Mp.Calculate the nominal moment and ultimate moment.Solution:280mm/d=510mm

Given: B=280mm, d=510mm d'=50mm As=2946mm^2 As'=1207mm^2 Fc'=34.5MPa Fy=414MPa

Ex3:A doubly reinforced rectangular section has width (280mm) and effective depth (510mm) and d'-(S0mm) and A, = 2946mm? ,A', = 1207mm? f. = 34.5Mpa,f, = 414Mp. Calculate the nominal moment and ulimate moment. Solurion: 280mm/ d=510m

Ex3:A doubly reinforced rectangular section has width (280mm) and effective depth (510mm) and d'-(S0mm) and A, = 2946mm? ,A', = 1207mm? f. = 34.5Mpa,f, = 414Mp. Calculate the nominal moment and ulimate moment. Solurion: 280mm/ d=510m

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Related questions

Q: Q2 Determine the vertical movement at C, if (P-100 KN). Steel L- 2 A me E= 2 G

A: When we apply the large load in some structures like beams or any other structure it will undergo…

Q: beam is subjected to a shear of 150 kN. Bel ge width, bf = 200 mm ge thickness, all depth, d = 300…

Q: The wide-flange shape has dimensions of b= 7.30 in., t;= 0.5 in., d 18.2 in., and tw-0.3 in. A…

A: The shear stress experienced in a primary part or get together is one more essential investigation.…

Q: 1. Compute the vertical distance of link AB from pin E for the given set up if the tension in link…

A: Given:- The magnitude of the weight at GF = 800 lb The magnitude of the tension in link AB = 1500 lb…

Q: A rectangular, tied column 480 mm wide along x-axis and 540 mm wide along y-axis is reinforced with…

A: Column- In architecture and structural engineering, a column or pillar is a structural member that…

Q: DETERMINE BAR FORCE MEMBERS EB, EC, AND DC USING METHOD OF SECTIONS. PLS ADD FBD. 3.2 KN 2.0r 2.0m 8…

Q: d 21 ih 349 bars 24in 3 in b 14in

Q: "D.77. Compute the ultimate strength capacity of the positive moment beam design below. f'c= 21 MPa,…

Q: Reinforced And Prestressed Concrete PROBLEM: A reinforced rectangular beam with width b and…

A: Given data - b = 197.5mm D = 317.5mm L =2.7 , wd = 13.75 kN/m WL = 17.75 kN/m

Q: A 30 m steel tape was standardized at a temperature of 20°C and under a pull 5 kg. The tape was used…

Q: 7=17.3 kN/m³ Lu=96 kN/m² Struts are spaced at 4.0 m center to center. 1.5m 3.0m 3.0 m 3.0m 1.5m II D…

Q: SITUATION: The beam carries a moment of 60kN/m. Use fc = 9MPA, fs = 124 MPa, n = 10. Determine the…

Q: A reinforced rectangular beam with width b =250 mm, effective depth d=470 mm andf =35 MPa. The beam…

Q: The flanged steel cantilever beam with riveted bracket is subjected to the couple and two forces…

Q: A W460×60 steel beam is loaded as shown. Assume w = 90 kN/m, M0 = 135 kN·m, LAB = 3.9 m, LBC = 1.6…

A: Given data in question UDL Concentrated moment Span length To find out Reaction RB

Q: Compute the ultimate strength capacity of the positive moment beam design below. f'c= 24.7 MPa, fy=…

A: Step 1: @Bottom, Ast=1963 mm2 @Top, Ast= 1256 mm2 Xu/d =0.87x505.6x1963 / 0.36 x 24.7 x 760x510…

Q: Determine bar force members EB, EC, and DC using method of sections. You may not copy the problem. F…

Q: Bin? t. Sft lo in 2 20K Bin? Gin? 8 in 2 - 20 ft

Q: 1.) Determine bar force members EB, EC, and DC using method of sections. F E в 3,2 KN 2.0r G 2.0 m 8…

Q: A short rectangular column 300 mm on one side and 400 mm on the other side. It is reinforced with…

A: As in question design code is not mention ,but by seeing the all parameters unit I have assume IS…

Q: Bar diameters a positioning in th figure given are representations Refer to the prc statement for th…

Q: 4-162. Wet concrete exerts a pressure distribution along the wall of the form. Determine the…

Q: Q3: Find moment at point(A,B,C and * D) P = 800 lb T= 600 Ib 6' C/60° DI 3

Q: Determine bar force members EB, EC, and DC using method of sections. You may not copy the problem. F…

Q: 6 m B Steel Steel girder (A = 27,700 mm2) column - 100 mm Q. 3. b D concrete slab 3 at 3 m = 9 m E F…

A: To determine the dead loads acting on the structure

Q: A square, tied column 410 mm wide is reinforced with 4 25-mm-diameter vertical bars with fy = 420…

Q: Determine the theoretical steel areas re rectangular section with b = 350 mm, d moment of 1,500…

Q: Determine the internal force system acting on section 1 by analyzing the FBD o (a) segment AD and…

Q: rectangular beam 250 mm wide, 500 mm deep is reinforced at the bottom with 4-20-mm-diameter bars and…

A: Solution: 0.36fck.b xu+(fs-fc)Asc= 0.87 fy Ast fs=0.87x415=361 fc=0.36x21=7.56…

Q: Q 3: Draw A. F. D., S. F. D., and B. M. 12 kN/m D. for the frame shown in Fig. (3) 100 kN B. 4 m…

A: We have to draw axial force, shear force and bending moment diagram

Q: Ex3:A doubly reinforced rectangular section has width (280mm) and effective depth (510mm) and…

A: Calculate xu lim xu lim=kdeffective (assuming for Fe415 steel, k=.48)…

Q: pls answer a, b ,c and highlight the answer A 5.50m beam (425mm by 525mm) is fixed support on one…

Q: Q/determine the required forces in the hangers at points B, C, and D so that the force-couple system…

A: To find force at point B, C and D

Q: Determine the slope (rad) at point B of the beam shown below. 250 kN D C -3m -3 m- 6 m El = constant…

Q: Calculate the ultimate moment capacity of a rectangular beam with b = 300 mm, d = 500 mm, As= 5400…

A: The given data is: Width, b=300 mm depth, d=500 Area, As= 5400 mm2 fc = 34 MPa, fy = 414 MPa

Q: Design the steel reinforcement for the uniaxial eccentrically loaded short column shown below, using…

A: Given:- fc' = 28 MPa fy = 420 MPa ex = 150 mm Pn = 2200 Kn

Q: Ans. P = 9.212 kN 3. A square aluminum bar is to support a load of 40 kN on a length of 3 m.…

Q: fy = 345 MPa f'c = 28 MPa Determine the Nominal Moment Capacity in kN-m. Beam as shown: 600 3-28mm…

Q: A rectangular beam 250 mm wide, 500 mm deep is reinforced at the bottom with 4-20-mm-diameter bars…

A: Given: The width of the beam, b is 250 mm. The depth of the beam, h is 500 mm. f'c=21 MPa and absces…

Q: Determine bar force members EB, EC, and DC using method of sections. You may not copy the problem. E…

A: Consider the figure,

Q: Find the max compression on member DI in kN. Put "0" if none. a= 4.5m b= 4.8m c= 50kN d= 68kN

Q: "D.35. Compute the ultimate strength capacity of the positive moment beam design below. f'c= 25.8…

A: Given Data: Ct=30mm Cb=35 mm bw=440 mm bf=710 mm hw= 470 mm t=90 mm Top layer of tension=4-28mm…

Q: 3-2KN 2.om G 2.0 m %23 1.5 m 1.5m 1.5m

Q: Compute the ultimate strength capacity of the positive moment beam design below. f'c= 24.7 MPa, fy=…

Q: DETERMINE BAR FORCE MEMBERS EB, EC, AND DC USING METHOD OF SECTIONS. PLS ADD FBD. 3.2 KN 2.0r D 2.0m…

Q: The one-way joist slab shown below consists of 150mm wide joists spaced at 550mm. the web width of…

A: Given: The width of joist is 150 mm. The spacing of joist is 550 mm. The column dimension is 500mm x…

Q: "D.39. Compute the ultimate strength capacity of the positive moment beam design below. f'c= 25.3…

A: Step 1: @Bottom, Ast=2463 mm2 @Top, Ast= 804 mm2 Xu/d =0.87x427.6x2463 / 0.36 x 25.3 x 790x530 =0.24…

Q: A reinforced rectangular beam with width b and effective depth d has 4.16 mm bars placed on 1 layer…

A: Given Data: The diameter of a stirrup is d=10 mm The Compressive stress is fc=28 MPa The tensile…

Q: Determine the nominal and design moment capacity of the following section: fy = 60000 psi f'c = 4000…

A: The design moment capacity is considered as the maximum moment carrying capacity for the beam that…

Q: Hw Draw S.f,B.M and elasticdiagvams for the beam shown beloi by using method of equations? lokw 4 KN…

Question

Ex3:A doubly reinforced rectangular section has width (280mm) and effective
depth (510mm) and d'-(Somm) and A, = 2946mm? ,A', = 1207mm?
f' = 34.5Mpa,fy = 414Mp.
Calculate the nominal moment and ultimate moment.
Solution:
280mm/
d=510mm

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps with 1 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

Calculate and draw the internal forces created at H section of the bracket beam? a = 500 mm b= 200 mm Px= 15 Kn Py=0 Kn Pz = 10 Kn
A reinforced rectangular beam with width b and effective depth d has 4.16 mm bars placed on 1 layer at the tension side. The beam has a stirrup with a diameter of 10 mm. Use fc=28 Mpa and fy=420 MPa GIVEN: b= 390.5 mm d= 610.5mm L= 6.45 m Wd = 13.5 kN/m WL = 35.5 kN/m Calculate the nominal moment capacity of the beam Calculate that strain of the tension bars. Calculate the strength reduction factor of the beam
Calculate for the axial force in kN at member CB using cantilever method a = 40.4 kN, b = 21.7 kN, c = 3.6 m
For the beam shown below, given that AB = 5 m, AC = 1 m, and P = 5 kN, draw the FBD, shear & momment diagram, and then calculate the magnitude of the internal bending moment at cross-section C of the beam: ____ kN m. Calculate your solution to 1 decimal place.
Compute the location and maximum value of elastic equation curvefor the beam loaded as shown. a
Consider the following framing plan below. Squares labeled A through L are columns. All girders have rectangular sections with width 300 mm and depth 600 mm. Slab thickness is 125 mm. Superimposed dead load for the entire floor is 2.95 kPa and live load for the entire floor is 4.8 kPa. For self-weight of the floor system, use unit weight of RC of 23.6 kN/m3. a. Considering continuous girder DEF, determine the maximum factored positive & negative moments Mu (+) & Mu (-), as well as the factored shear Vu that should be used for the design of the said girder. Use ACI moment & shear coefficients to draw the factored shear & moment diagram of the said girder.
A reinforced rectangular beam with width b and effective depth d has 4.16 mm bars placed on 1 layer at the tension side. The beam has a stirrup with a diameter of 10 mm. Use fc=28 Mpa and fy=420 MPa GIVEN: b= 350 mm d= 600 mm L= 6 m Wd = 13 kN/m WL = 36 kN/m Calculate the nominal moment capacity of the beam Calculate that strain of the tension bars. Calculate the strength reduction factor of the beam
Determine the magnitude of the 15 points force in member CD using method of section * (O 35.3KN Tension O none of the above (O 15.02KN Tension () 27.7 KN Compression (O 13.83 KN Tension O 16.2 KN Compression
Determine the nominal moment strengt of the irregular beam shown. Assume the area of 25 mm rebar is 510 sq. mm. Given: a.) fc' = 35 MPa; fy= 413.70 MPa b.) fc' = 21 MPa; fy = 413.70 MPa
A steel bar having cross-sectional areaA=1200mm2 is compressed by an axial loadP=53 kN.Determine the average normal and shear stressesacting on aninclined sectionaa cut through the bar at angleα=250.(Point K is a fixed support) A=5, B=3, C=8
subj: civil engineering A 50-mm diameter bar is used as a simply supported beam 3 m long. The flexural stress is limited to 50 MPa. If w = 36. •Find Fb(bottom) and Ft(top). (F = Mc/I) •Plot the flexural stress and draw a shear & moment diagram.
A steel tank 2m by 1.5m by 1.2m weighs 10KN when empty and is supported by two steel beams spanning 2.0m and each weighing 10KN. Design a suitable square section for the steel beams if the tank is filled water weighing 10KN/m^3 using the plastic method. The permissible bending stress on the section is 140N/mm^2 and factor of safety is 1.5