Please include the graph for the calculations. Example Question 1A dynamometer-type AC ammeter made of moving coils and fixed coils with a shunt is usedto measure current. The ammeter is designed to let 95% of the input curent flow through theshunt resistor. The moving coil's resistance is 10 2, and the shunt resistance is 0.004 2.The Table Q1 below gives the relation between the deflection and the mutual inductance ofthe ammeter.Table Q1Deflection2.44(radian)(full-scale)0.260.521.051.571.832.09MutualInductance-325-260-180180263325373(µH)If the input current that gives the full-scale deflection is = 6.7A, determine the following:(i)(ii)(iii)the current passing through the moving coil at full-scale deflection,the deflecting torque that gives full-scale deflection,the current passing through the fixed coil at half-scale deflection.(Hint: Plot the Mutual Inductance vs. Deflection graph based on the table above. Then, use thegraph to solve parts (ii) and (iii))

For a dynamometer-type AC ammeter -The moving coil's resistance is,R=10ΩThe shunt resistance…

Example Question 1 A dynamometer-type AC ammeter made of moving coils and fixed coils with a shunt is used to measure current. The ammeter is designed to let 95% of the input current flow through the shunt resistor. The moving coil's resistance is 10 Q, and the shunt resistance is 0.004 Q. The Table Q1 below gives the relation between the deflection and the mutual inductance of the ammeter. Table Q1 Deflection 2.44 (radian) 1.57 1.83 2.09 (full- scale) 0.26 0.52 1.05 Mutual -325 -260 -180 180 263 325 373 Inductance (µH) If the input current that gives the full-scale deflection is = 6.7A, determine the following: (i) (ii) (iii) the current passing through the moving coil at full-scale deflection, the deflecting torque that gives full-scale deflection, the current passing through the fixed coil at half-scale deflection. (Hint: Plot the Mutual Inductance vs. Deflection graph based on the table above. Then, use the graph to solve parts (ii) and (iii))

Example Question 1 A dynamometer-type AC ammeter made of moving coils and fixed coils with a shunt is used to measure current. The ammeter is designed to let 95% of the input current flow through the shunt resistor. The moving coil's resistance is 10 Q, and the shunt resistance is 0.004 Q. The Table Q1 below gives the relation between the deflection and the mutual inductance of the ammeter. Table Q1 Deflection 2.44 (radian) 1.57 1.83 2.09 (full- scale) 0.26 0.52 1.05 Mutual -325 -260 -180 180 263 325 373 Inductance (µH) If the input current that gives the full-scale deflection is = 6.7A, determine the following: (i) (ii) (iii) the current passing through the moving coil at full-scale deflection, the deflecting torque that gives full-scale deflection, the current passing through the fixed coil at half-scale deflection. (Hint: Plot the Mutual Inductance vs. Deflection graph based on the table above. Then, use the graph to solve parts (ii) and (iii))

Delmar's Standard Textbook Of Electricity

7th Edition

ISBN:9781337900348

Author:Stephen L. Herman

Publisher:Stephen L. Herman

Chapter29: Dc Generators

Section: Chapter Questions

Problem 1PA: You are working as an electrician in a large steel manufacturing plant, and you are in the process...

See similar textbooks

Similar questions

A. It took a heater of 2 KW 158 minutesto raise by 30°C the temperature of water in an industrial vessel. How many gallons of water are inside the vessel? A. 30 gallons B. 10 gallons C. 40 gallons D. 20 gallons B.The ohmic resistance of a large magnetic contactor is measured to be 20 ohms. A 230 V is impressed on the contactor and the current is taken as 3.2 amperes. Neglecting core loss, determine the inductance of the contactor in mH. A. 261 B. 183 C. 315 D. 251
1... Why do we use round-shaped coils (I.e., Round shaped turns in the coils) in both the primary and secondary circuits [If those coils were not round-shaped, what would be the problem]? Must show the draw figures 2.... Write down major differences between conducting and displacement current densities with proper figures.
The resistance of the field coils with copper conductor of a dynamo is 120 Ohms at 25 o C. After working for 6 hours on full load, the resistance of the coil increases to 148 Ohms. Calculate the mean temperature rise of the field coil. Take the temperature coefficient of the conductor material as 0.0042 at 0 o C.
A 200-turn coil is immersed in a 60-Hz flux with an effective value of 4 mWb. Obtain an expression for the instantaneous value of the induced emf. If a voltmeter is connected between its two ends, what will be the reading on the voltmeter?
A solenoid coil needs to be manufactured which produces an inductance of at least 2000 Gauss (in SI system = Tesla) when a 10mA current flows through the conductor. Due to space limitations, the coil should be composed of 10 turns over a 1cm length. Do the required calculations and select a core material for the coil from the table below. Your answer will be given over the following series of questions. A. H = 0.12566 oersted B. H = 12.56637 oersted C. H = 1.25664 The relative permeability of the manufactured solenoid from the previous question is: A. μr = 15.916 B. μr = 15915.964 C. μr = 1.2665e10 D. None of the mentioned/ Geen van die genoemde
A solenoid coil needs to be manufactured which produces an inductance of at least 2000 Gauss (in SI system = Tesla) when a 10mA current flows through the conductor. Due to space limitations, the coil should be composed of 10 turns over a 1cm length. Do the required calculations and select a core material for the coil from the table below. Your answer will be given over the following series of questions. A. H = 0.12566 oersted B. H = 12.56637 oersted C. H = 1.25664
A solenoid coil needs to be manufactured which produces an inductance of at least 2000 Gauss (in SI system = Tesla) when a 10mA current flows through the conductor. Due to space limitations, the coil should be composed of 10 turns over a 1cm length. Select a suitable core material for the manufactured solenoid coil from the table. A. MnZn Ferrite B. 4750 alloy C. None of the mentioned/ Geen van die genoemde D. Silicon iron
A mild street ring having across sectional area of 600 sq mm and a mean circumference of 500 mm has a coil of 300 turns uniformly around it. Calculate the reactance at the ring and the current required to produce a flux of 800 uwb in the ring. If the relative permeability is 400.
Q 03: Briefly discuss, how the energy consumptions for operations of a fork lifter could be justified. Suppose that a fork lifter has a total energy consumption of 150 W.Hr. The total trips of the vehicle are 375. How the battery duty cycle may be calculated in this case?
Determine the resistance of a copper conductor with a diameter of 6mm and a length of 20m.The resistivity of copper is 1.7?10−8 ohm-meters.2. Find out, and in your own words write what differences in electrical behavior obey.between one material and another (conductors, semiconductors and insulators).3. A copper wire has a resistance of 10Ω at 50 ° F, what resistance will it have at 70 ° C?4. If we have a single-phase motor at a distance of 100 meters and its nameplate registers the followingdata. U = 120V / In = 25th. Calculate the potential drop over the electrical conductor. If we measure at the terminalsconnection of the motor How much would be the voltage registered in the Voltmeter?5. Considering the scheme of the voltage divider (voltage divider) shown in the followingImage, Design the circuit calculating its resistances (R1 and R2) to obtain an output voltage ???? of 5Vmaximum dc, taking into account that the input voltage ??? is 30V dc. (Use values greater than or equal…
Determine the resistance of a copper conductor with a diameter of 6mm and a length of 20m.The resistivity of copper is 1.7?10−8 ohm-meters.2. Find out, and in your own words write what differences in electrical behavior obey.between one material and another (conductors, semiconductors and insulators).3. A copper wire has a resistance of 10Ω at 50 ° F, what resistance will it have at 70 ° C?4. If we have a single-phase motor at a distance of 100 meters and its nameplate registers the followingdata. U = 120V / In = 25th. Calculate the potential drop over the electrical conductor. If we measure at the terminalsconnection of the motor How much would be the voltage registered in the Voltmeter?5. Taking into account the scheme of the Voltage divider (voltage divider) shown in the followingImage, Design the circuit calculating its resistances (R1 and R2) to obtain an output voltage ???? of 5Vmaximum dc, taking into account that the input voltage ??? is 30V dc. (Use values greater than or…
Rigid metal conduit (RMC) is a threadable raceway of ____ designed for the physical protection and routing of conductors and cables. Select one: A. AN INCOMPRESSIBLE MATERIAL B. GALVANIZED STEEL C. VARIOUS BENDING RADII D. CIRCULAR CROSS SECTION