H5. Filter parameters:High-pass: Design a highpass filter with no morethan 3 dB of ripple in a passband at 16000 Hzand above, and at least 60 dB of attenuation inthe stopband from 0 to 400 Hz. Find the filterorder and cutoff frequency.Band-pass: Design a bandpass filter with nomore than 3 dB of ripple in a passband from 160to 4000 Hz and upwards, and at least 60 dB ofattenuation in the stopband from 0 to 40 Hz andfrom 16000 onwards. Find the filter order andcutoff frequency.System response:Consider a Butterworth low-pass filter of order N = 5 and cutofffrequency wc = 1(a) Find the 2K poles of H(s)H(-s).(b) Determine H (s).

Since you have asked multiple question, we will solve the first question for you. If you want any…

Filter parameters: High-pass: Design a highpass filter with no more than 3 dB of ripple in a passband at 16000 Hz and above, and at least 60 dB of attenuation in the stopband from 0 to 400 Hz. Find the filter order and cutoff frequency.

Filter parameters: High-pass: Design a highpass filter with no more than 3 dB of ripple in a passband at 16000 Hz and above, and at least 60 dB of attenuation in the stopband from 0 to 400 Hz. Find the filter order and cutoff frequency.

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

Design the lowest order Butterworth lowpass filter with -1 dB at cut-off frequency1kHz, an a minimum attenuation of -40dB at 3k Hz.
Determining theOrder of a Butterworth Filter1. Determine the order of a Butterworth filter that has a cutoff frequency of1000 Hz and a gain of no more than −50 dB at 6000 Hz.2. What is the actual gain in dB at 6000 Hz?
There is a system that works with a sampling rate of 48 kpsp and requires a bandpass filter that lets the spectral components pass between the fa=12kHz and fb=16kHz sequences. If you are using a 32-tap FIR filter. What is the value of the central frequency, f0, in Hz of the band that passes the filter? And what is the outline of the frequency response for the filter passes bands?
Design a high pass filter with a cut of frequency of K1 and a passband gain of K2. Take K1 equal to 27 in kHz and K2 is the 7 (b) Plot the Bode plot of the frequency response of the designed circuit using a python script and validate your answer. (c) How would you increase the passband gain by a factor of five without changing the cutoff frequency?
H.W2: a) Using 0.1 µF capacitors, design an active broadband first-order bandpass filter that has a lower cutoff frequency of 200 Hz, an upper cutoff frequency of 2000 Hz, and a passband gain of 0 dB. b) Write the transfer function for the scaled filter. c) Use the transfer function derived in part (b) to find H(jw,)where w, is the center frequency of the filter. d) What is the passband gain (in decibels) of the filter at wo?
Q2 ) a ) Design a broadband parallel bandreject filter with a lower cutoff frequency of 1000 rad / s , a bandwidth of 3000 rad / s , and a passband gain of 10. Use 0.5 uF capacitors b ) Draw the circuit of the filter in ( a ) , c ) Calculate the gain at the center frequency Q3 ) a ) Determine the order of a lowpass Butterworth filter that has a cutoff frequency of 1000 rad / sec and again of no more than -36 dB at 10000 rad / sec . b ) Using 1 kq resistors and ideal op amps , design a circuit that will implement the lowpass Butterworth filter specified in ( a ) The gain in the passband is one c ) Construct the circuit diagram and label all component values
bandreject filter with a lower cutoff frequency of 400 Hz, an uppercutoff frequency of 4000 Hz, and a passband gain of 0 dB. Use theprototype filter circuits introduced in the design process.2. Draw the circuit diagram of the filter and label all of thecomponents.3. What is the transfer function of the scaled filter?4. Evaluate the transfer function derived in (c) at the center frequencyof the filter. 5. What is the gain (in decibels) at the center frequency?6. Using a computer program of your choice, make a Bode magnitudeplot of the filter transfer function.
DESIGNPROBLEM_Using a 100 nF capacitor, design a highpass passive filter with a cutoff frequency of 300 Hz. 1. a) Specify the value of R in kilohms. 2. b) A 47 kΩ resistor is connected across the output terminals of the filter. What is the cutoff frequency, in hertz, of the loaded filter?
Design an active high-pass filter (choose the values of R1, R2, and C) with fL = 5 kHz, a high frequency gain of 20 dB, and an input resistance of 18 k at high frequencies.
The operational amplifier circuit shown in the figure is used as a high pass filter. Assume:C=150nF, Ro=200ΩR1 =2kΩ , R2 =6kΩDetermine:A. The Vo/Vs gain in decibels in the bandwidth.B. The cutoff frequency.
A numerical filter design problem is given. This filter, which is desired to be causal and stable, suppresses 0 and π frequencies (having zero at z1=1 and z2=-1 points) and passes π/2 and –π/2 frequencies (p1=rejπ/2 and p2=re-jπ/2). have poles at the points) is desired. By choosing an appropriate r-value, the filter: a. give the system function and frequency response,b. Give the unit impulse response,c. Give the difference equation.
A transducer measures a sinusoidal signal with an amplitude of +-5V and a frequency up to 10Hz. Superimposed on this signal is 60-Hz noise with an amplitude of 0.1V. It is desired to attenuate the 60-Hz signal to less than 10% of its value using Butterworth filter. - Select the filter order n and its cutoff frequency fc. Justify your selections - What is the disadvantage of selecting the filter cutoff frequency, fc to equal the highest frequency output of the measured signal?