Find expressions for shear force V and moment M at x = L/2 of beam AB in structure (a). Express V and M in terms of peak load intensity go and beam length variable L. Repeat for structure (b) but find V and M at the mid-span of member BC. A A L/2 V, M at L/2 on AB L/2 1/2 B Structure (a) L/2 B 90 Structure (b) 90 V, Mat mid-span of BC 4L/5 4L/5

Find expressions for shear force V and moment M at x = L/2 of beam AB in structure (a). Express V and M in terms of peak load intensity go and beam length variable L. Repeat for structure (b) but find V and M at the mid-span of member BC. A A L/2 V, M at L/2 on AB L/2 1/2 B Structure (a) L/2 B 90 Structure (b) 90 V, Mat mid-span of BC 4L/5 4L/5

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter5: Stresses In Beams (basic Topics)

Section: Chapter Questions

Problem 5.7.2P: .2 A ligmio.irc ii supported by two vorlical beams consistins: of thin-walled, tapered circular...

See similar textbooks

Similar questions

Find expressions for shear force V andmoment M at x = x0 of beam AB in terms of peakload intensity q0 and beam length variable L.Let x0 = 2L/3.
A fixed beam AB, 5 m long, is carrying a point load at its centre. The moment of inertia of the beam is 60 x 106 mm4 and modulus of elasticity for beam material is 2.2 x 105 N/mm2. End moments are taken to be 40 kN-m. The load at the centre is
An I-beam has a flange width b = 400 mm , height hℎ = 400 mm , web thickness tw = 13 mm , and flange thickness tf = 21 mm . Use the following steps to calculate the shear flow at the point shown, where x = 55 mm . A) The formula for the shear flow includes the moment of inertia of the whole cross section, I, about the neutral axis. Calculate the moment of inertia. B) The shear flow at the point depends on the value of Q for the portion of the upper flange to the right of the point. Calculate the value of Q C) Use the results from Parts A and B to calculate the shear flow at the point in the upper flange 55 mm to the right of the web if the shear force on the section is V = 4.6 kN
An I-beam has a flange width b = 400 mm , height h = 400 mm , web thickness tw = 13 mm , and flange thickness tf = 21 mm . Use the following steps to calculate the shear flow at the point shown, where x = 55 mm . A) The formula for the shear flow includes the moment of inertia of the whole cross section, I, about the neutral axis. Calculate the moment of inertia. B) The shear flow at the point depends on the value of Q for the portion of the upper flange to the right of the point. Calculate the value of Q C) Use the results from Parts A and B to calculate the shear flow at the point in the upper flange 55 mm to the right of the web if the shear force on the section is V = 4.6 kN
A beam segment subjected to internal bending moments at sections A and B is shown along with a sketch of the cross-sectional dimensions. The beam segment is subjected to internal bending moments of MA = 1390 N·m and MB = 3080 N·m. The segment length is Δx = 180 mm. Consider area (2) and use cross-sectional dimensions of b = 92 mm, d = 240 mm, and d2 = 68 mm. (a) sketch a side view of the beam segment and plot the distribution of bending stresses acting at sections A and B. Indicate the magnitudes of key bending stresses on the sketch, including the stresses at the top and bottom of area (2) on both sections A and B. Tensile stresses are positive, while compressive stresses are negative. (b) determine the resultant forces acting in the x direction on the specified area at sections A and B, and show these resultant forces on the sketch. Tensile forces are positive, while compressive forces are negative. (c) determine the magnitude of the horizontal force required to satisfy equilibrium…
a) The second moment of area about the centroidal x-axis (IXXcentroid) for the solid homogeneous beam section shown below is 737,101.55 mm4. What is the second moment of area about the centroidal y-axis (IYYcentroid). Give your answer in mm4 to two significant figures. b) If the second moment of area (IXX) for the solid homogeneous beam section shown below is 917,387.73 mm4, determine the diameter d. Give your answer in millimetres (mm) to two decimal places.
N for Newton, m for meter, mm for millimeter, N/(mm^2) for Stress, mm^2 or m^2 for Area, mm^4 for Moment of inertia and Nm for bending moment. Use brackets if the power is MINUS for Example: 0.00125 N =1.25*10^(-3)N. A beam has a bending moment of 3 kN-m applied to a section with a hollow circular cross-section of external diameter 3.4 cm and internal diameter 2.4 cm . The modulus of elasticity for the material is 210 x 109 N/m2. Calculate the radius of curvature and maximum bending stress. Also, calculate the stress at the point at 0.6 cm from the neutral axis Solution: (i) The moment of inertia = ii) The radius of curvature is (iii) The maximum bending stress is iv) The bending stress at the point 0.6 cm from the neutral axis is
A beam having a tee-shaped cross section is subjected to equal 13 kN-m bending moments, as shown. Assume bf = 95 mm, tf = 25 mm, d = 165 mm, tw = 40 mm. The cross-sectional dimensions of the beam are also shown. Determine(a) the centroid location (measured upward from the bottom), the moment of inertia about the z axis, and the controlling section modulus about the z axis.(b) the bending stress at point H (positive if tensile and negative if compressive).(c) the maximum bending stress (positive if tensile and negative if compressive) produced in the cross section.
A plastic beam has a cross section with dimensions of a = 2.3 in., b = 8.1 in., d = 4.6 in., and t = 0.6 in. The centroid is located c = 1.941 in. above the bottom surface of the beam, and the moment of inertia of the shape about the z centroidal axis is Iz = 33.131 in. 4. For a shear force of V = 2650 lb, what is the maximum shear stress in the beam?
Answer only Civil engineering A cantilever beam of length L and flexural modulus El is subjected to a point load P at the free end. The elastic strain energy stored in the beam due to bending (neglecting transverse shear) is
Draw the Shear Force and Bending Moment Diagram for the loaded simply supported beam shown below. Ignore the self-weight of the beam. Also, Find the maximum bending stress in the beam, if its cross section is rectangular, that it is 15 cm wide and 20 cm deep. Also, determine the stress in a fiber located at 6 cm & 10 cm from the top of the beam.
N for Newton, m for meter, mm for millimeter, N/(mm^2) for Stress, mm^2 or m^2 for Area, mm^4 for Moment of inertia and Nm for bending moment. Use brackets if the power is MINUS for Example: 0.00125 N =1.25*10^(-3)N. A simply supported beam AB = 11 m has a hollow rectangular cross-section with 14 cm as width, 29 cm as depth and inner thickness as 1 cm is subjected to a point load of 6 N & 8 N acting at C and D respectively and a uniformly distributed load (UDL) of 8 N/m starts from mid-span and ends at the right support of the beam. Determine the maximum bending stress and the bending stress at 1 cm from the top. Take AC = 1 m & CD = 2 m. Solution: i) Reaction force at B = ii) Reaction Force at A = iii) The distance from B at which the shear Force value changes from "-" to "+" = iv) Maximum Bending Moment (Please write the Maximum bending moment valve in "Nm") = v) Moment of Inertia, I = vi) Maximum bending stress = vii) Bending stress at 1 cm from…