Forces in the column bars are transferred to the footing through No 10 bars. Determine the development length required into the column and into the footing if the steel has a yield stress of 60 ksi. Normal weight concrete is used. The concrete strength in the column is 6,000 psi and the concrete strength in the footing is 5,000 psi up into column down into footing

Forces in the column bars are transferred to the footing through No 10 bars. Determine the development length required into the column and into the footing if the steel has a yield stress of 60 ksi. Normal weight concrete is used. The concrete strength in the column is 6,000 psi and the concrete strength in the footing is 5,000 psi up into column down into footing

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A footing of size 2.5 m x 2.5 m and 500 mm thick resists characteristic axial loads of 800kN dead and 300 kN imposed from a 400 mm square column. The safe bearing pressure on the soil is 230 kN/m2 and the characteristic material strengths are fcu = 35 N/mm2, fy=460N/mm2. Density of concrete is 24 k N/m3. Cover to all reinforcement is 50 mm. Determine the design load b) Check whether the base pressure is safe c) Design the bending reinforcement, assuming 16 mm diameter bars.
the pad footing is used to support the load of 12 000lb. determine the intensities (in lb/ft) w1 and w2 of the distributed loading acting on the base of the footing for the equilibriumWhat is the computed value of w1 in pounds per foot What is the computed value of w2 in pounds per foot
A square footing 2.1 m x 0.31 m thick supports a 300 mm square column at its center. Column loads are service conditions: DL = 389 kN LL = 234 kN f’c = 21 MPa fy = 415 MPa Concrete cover to the centroid of steel reinforcement = 100 mm Calculate the maximum ultimate bending moment in the slab. Write your final answer as whole number with the unit of kN-m.
A square footing 2.2 m x 0.31 m thick supports a 300 mm square column at its center. Column loads are service conditions: DL = 331 kN LL = 251 kN f’c = 21 MPa fy = 415 MPa Concrete cover to the centroid of steel reinforcement = 100 mm Calculate the nominal one way shear stress in the slab. Write your final answer with 2 decimal places if the unit is MPA.
a square footing 2.4 m x 0.34 m thick supports a 300 mm square column at its center. column loads are service conditions:DL = 376 kN LL = 213 kN f'c = 21 MPa fy = 415 MPa Concrete cover to the centroid of steel reinforcement = 100 mm calculate the nominal one way shear stress in the slab. write your final answer with 2 decimal places if the unit is MPA.
A square footing 2.5m x 2.5 m supports a square column 300mm x 300mm at its center. Concrete cover to bar centroid = 100mm. Ultimate load combination is 1.2DL + 1.6L. Column loads aee service conditions:DL = 680 kN LL = 400kNf'c = 20.7 Mpa fy = 275 MPa Calculate the nominal punching-shear stress acting at the critical section of the footing slab if the thickness of the slab is 450 mm. (Correct Answer 1.99)
Design a square pad footing with an overall depth of 600mm, cover to the reinforcements 50mm with 20mm diameter reinforcement bars in both directions. The footing carries a 400mm square column with a dead load of 1050KN and imposed load of 300KN. The safe bearing capacity of the soil is 170KN/m^2, fcu 30N/mm^2. Assume a unit weight of concrete to be 24KN/m^3 and footing weight 150KN
a square footing 2.4 m x 2.4 m x 0.45 m thick supports a 300 mm square column at its center. column loads are at service conditions dl = 346 kn, ll = 231 kn, fc' = 21 mpa, and fy = 415 mpa. concrete cover to the centroid of steel reinforcement is 100 mm. calculate the nominal one way shear stress in the slab
Conduct a bearing capacity analysis on the Fargo Grain Elevator (see sidebar) and back-calculate the average undrained shear strength of the soil. The groundwater table is at a depth of 6 ft below the ground surface. Soil strata A and B have unit weights of 110 lb/ft3; stratum D has 95 lb/ft3. The unit weight of stratum C is unknown. Assume that the load on the foundationacted through the centroid of the mat.
A rectangular footing 2.1 m x 3.2 m x 0.37 m thick supports a 300 mm square column at its center. Column loads are service conditions: DL = 363 kN LL = 291 kN f'c = 21 MPa Fy = 415 MPa Concrete cover to the centroid of steel reinforcement = 100 mm Calculate the nominal punching shear stress in the slab. Write your final answer with 2 decimal places if the unit is MPa.
a square footing 2.4 m x 2.4 m x 0.45 m thick supports a 300 mm square column at its center. column loads are at service conditions dl = 346 kn, ll = 231 kn, fc' = 21 mpa, and fy = 415 mpa. concrete cover to the centroid of steel reinforcement is 100 mm. calculate the nominal punching shear stress in the slab
A square column 449 mm x 449 mm rests on a square footing. The column supports a dead load of 1,039 kN and a live load of 830 kN. The soil bearing capacity is 254.26 kPa. The base of the footing is 1.57 m below the ground. Assume unit weight of concrete of 24 kN/m3 and unit weight of soil of 16.6 kN/m3. The footing has a thickness of 597 mm and the centroid of the main bars is 100 mm from the bottom of the footing. Use fc’ = 24.4 MPa, fy = 248 MPa. Calculate the number of required number of 16 mm ϕ bars Note: Present the width (B) in multiples of 100 mm.