Given: A 8 kV circuit has a load consisting of 640 N of resistance in series with 960 N of inductive reactance. A capacitive reactance of -1600 2 is placed in parallel with the whole load. Required: What is the apparent power and power factor that must be provided by the source? Solution: |SS = kVA PF

Given: A 8 kV circuit has a load consisting of 640 N of resistance in series with 960 N of inductive reactance. A capacitive reactance of -1600 2 is placed in parallel with the whole load. Required: What is the apparent power and power factor that must be provided by the source? Solution: |SS = kVA PF

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.2P: Convert the following instantaneous currents to phasors, using cos(t) as the reference. Give your...

See similar textbooks

Similar questions

A series circuit consists of resistance of 10 ohm, an inductance of 200/π mH and capacitance of 1000/π μF . Calculate (a) the current flowing in the circuit if supply voltage is 200 V, 50 Hz, (b) power factor of the circuit, (c) power drawn from the supply. Also draw the phasor diagram.
Show that at a given frequency ω, the circuits will have the same impedance between the terminals a,b ifR2=1+ω2R12C12ω2R1C12,C2=C11+ω2R12C12.(Hint: The two circuits will have the same impedance if they havethe same admittance.)2. Find the values of resistance and capacitance that when connectedin parallel will give the same impedance at 50 krad/s as that of a1 kΩ resistor connected in series with a capacitance of 40 nF
Q10. If the impedance of a circuit = 20 – j10n, if a voltage source is connected across this impedance, which if the following statements is correct?
Which component of impedance is not dependent on the frequency of the source of voltage? A. capacitance reactance B. inductive reactance C. resistance D. all are independent of the frequency of the source
(a) Calculate the equivalent impedance of the circuit given below, if the source voltage is v(t) = 60cos1000t (b) Calculate the source current flowing in the circuit (c) Draw the phasor diagram of the current and input voltage
A machine shop is fed by a 250 kVA 480 V three-phase electrical service. On one of thebranches leading away from the service, the shop runs several manufacturing machines,giving the branch a load profile of 175 kW with a 0.85 lagging PF.Determine the minimum allowed gauge of the branch conductors. Branch conductors arealuminum, THW, contained within a raceway with an ambient temperature of 40 ºC
A transmission line with impedance of 0.085 + j 0.32 Ω is used to deliver power to a load. The load is inductive and the load voltage is 200∠0° Vrms at 60Hz. If the load operates at 20 kVA with a power factor of 0.75 determine the real and quadrature power losses in both the load and the line and the source voltage phasor.
Impedances Z2 and Z3 in parallel are in series with impedance Z1 across a 100 V, 50 Hz acsupply. Z1 =6.25 + j 1.25 ohm; Z2 = 5 + j0 ohm and Z3 = 5 – jXc ohm. Determine the value ofcapacitance of Xc such that the total current of the circuit will be in phase with the totalvoltage. When is then the circuit current and power.
Consider the current i(t)= 30sin(100t+90o) mA. is applied the circuit given below. a) Find and draw phasor equivalent of the circuit b) Find Iload and Vload phasors and and draw them on the real-imaginary axis. Find iload(t) and vload(t) via inverse phasor, comment phase angles c)Find active, reactive and complex power (P,Q,S) absorbed by the load. please fast
a 10 kiloohms resistor is connected in parallel with an inductor L. The parallel combination is then connected in series with a 2 kiloohms resistor and 5nF capacitor. If the whole combination is connected to a voltage supply of 50cis0 volts at a frequency of w=50,000rad/s, find the value of L such that the total current is in phase with the supply voltage. ("in phase") means that the voltage and the current have the same angular displacement.
A series circuit of RLC with following parameters, R=15 ohm, L=20 m H & C=100 micro Farad. VT=169.7 sin (337t-30) Volt. Find the following: Zt, , It, Voltage across each element, Power factor, apparent power, real or average power and reactive power and the total phasor diagram and power phasor diagram
7. Find all branch currents in the circuit below and the equivalent impedance of the general circuit seen from the voltage source with the help of phasors. V(t)=10 ejωt V, ω=104 rad / s.