Given the data of a continuous solid one-way slab. Spans given are all clear spans. For shear and moment calculations, use the NSCP coefficients. Apply code provisions for spacing where applicable, Unit weight of concrete= 24 kN/m3 All end spans = 4 m All interior spans = 3.0 m Fc' = 28 MPa, fy = 415 Mpa Loads: floor live load= 2.4 kPa U = 1.2D = 1.6L a. Determine the appropriate uniform thickness forthe slab in mm. b. If the clear bar cover is 20 mm, determine the spacing of the 12mm flexural steel required at the critical moment section c. Determine the spacing of 10mm temperature reinforcements in mm.

Given the data of a continuous solid one-way slab. Spans given are all clear spans. For shear and moment calculations, use the NSCP coefficients. Apply code provisions for spacing where applicable, Unit weight of concrete= 24 kN/m3 All end spans = 4 m All interior spans = 3.0 m Fc' = 28 MPa, fy = 415 Mpa Loads: floor live load= 2.4 kPa U = 1.2D = 1.6L a. Determine the appropriate uniform thickness forthe slab in mm. b. If the clear bar cover is 20 mm, determine the spacing of the 12mm flexural steel required at the critical moment section c. Determine the spacing of 10mm temperature reinforcements in mm.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A rectangular beam has b = 300 mm and d =490 mm. Concrete compressive strength ?? ′ = 27.6 ??? and steel yield strength ?? = 276 ??? . Calculate the required steel reinforcement area if the factored moment is 350kN-m
(Double reinforced beam)A rectangular beam has b = 300 mm and d =490 mm. Concrete compressive strength ?? ′ = 27.6 ??? and steel yield strength ?? = 276 ??? . Calculate the required steel reinforcement area if the factored moment is 350kN-m
Given are the data of a continuous one –way slab. The spans given are all clear spans. For moment calculations, use the NSCP 2010 coefficients. Apply code provisions for spacing limits Unit weight of concrete = 24 kN/m3 End Spans = 3.50 m Interior Spans = 4.0 m f’c = 25 MPa fy = 280 MPa LOADS : Live Load = 2.4 KPa A.Determine the appropriate uniform thickness of the slab B.If the clear bar cover is 20mm, determine the spacing of 12mm diameter flexural reinforcement required at midspan of interior spans. C.Determine the spacing of 10mm diameter temperature reinforcements. hello please answer this thanks
A rectangular beam has b = 300 mm and d =490 mm. Concrete compressive strength is 27 MPa and steel yield strength is 276 MPa. Calculate the required tension steel area if the factored moment is (a) 20 kN-m, (b)140 kN-m, (c) 485 kN-m, and (d) 520 kN-m.
A square footing 2.5 m x 2.5 m supports a rectangular column 300 mm x 300 mm at its center. Concrete cover to bar centroid = 100 mm. Ultimate load combination is 1.2D + 1.6L. Column loads are service conditions: DL = 680 kN LL = 400 kN f’c = 20.7 MPa fy = 275 MPa Calculate the ultimate moment at critical section for bending for 1-m strip of the footing slab. = [Mu] kN·m/m (whole number) Answer: 141
PROBLEM 1: A reinforced concrete beam has a simple span of 8m. It carries a concentrated factored load, Pu, at midspan. The beam is reinforced with 3D25mm. It has a width of 300mm and an effective depth of 450mm. Neglecting the weight of the beam, and using the exact/detailed calculation for Vc. 1. What is the ultimate shear capacity of concrete at a section 2m from the support? 2. What should be the shear capacity of web reinforcement at the section 2m from the support? 3. What is the maximum spacing of web reinforcement allowed by the code at the section 2m from the support if the diameter of stirrups is 12mm? 4. What is the required spacing of web reinforcement at the section 2m from the support if the diameter of stirrups is 12mm? 5. Draw the design details for shear of the beam from x=Om to x=2m.
a square footing 2.4 m x 0.34 m thick supports a 300 mm square column at its center. column loads are at service conditions dl = 346 kn, ll = 231 kn, fc' = 21 mpa, and fy = 415 mpa. concrete cover to the centroid of steel reinforcement is 100 mm. calculate the nominal one way shear stress in the slab
PROBLEM 2: A reinforced concrete beam has a simple span of 7m. It carries a uniformly distributed dead load (including its own weight) of 9kN/m, live load equal to 18kN/m . The beam is reinforced with 3D28mm bars and has a width of 250mm and an effective depth of 450mm. fc’=28Mpa and fy=345Mpa. Using the simplified calculation for Vc, what is the nominal shear capacity of concrete? At what section of the beam is the web reinforcement theoretically not required? At what section of the beam is the web reinforcement no longer required according to the NSCP? Draw the design details for shear of the beam from x=3m to x=3.5m.
Estimate the required size (width and total depth) of the plain concrete wall footing to carry a 12-in.-thick reinforced concrete wall. Service loads are 2.3 kip/ ft dead load (includes the weight of the wall) and 2.3 kip/ft live load. The bottom of the footing is to be 4 ft below grade and the net bearing capacity of the soil is 4,000 psf. The weight of earth We = 100 lb/ft3, and f’c = 3000 psi. Sketch the final design.
A simply supported 1 way slab having span of 3 meters is to carry the load for DL = 5kpa and LL = 4.8Kpa. If the concrete f'c = 28Mpa and rebar to be used is 10mm with fy = 276Mpa. a.) Determine the minimum thickness of the 1 way slab.(answer in millimeter in whole number) b.) Determine the Ultimate loading combination for the slab considering 1 meter strip?(answer in KN/m. in 3 decimal places ) c.) Determine the Ultimate moment for the slab considering 1 meter strip?(answer in KN-m. in 3 decimal places) d.) Determine the effective depth of the slab considering concrete cover = 20mmanswer in millimeter. in whole number e.) Determine the area of reinforcement for the slab based on the actual loadings.(answer in sq.mm. in 3 decimal places) f.) Determine the spacing of the rebar.(answer in millimeter(Don't round up, use actual value). in 3 decimal places)
Design a circular spirally reinforced concrete column to support a design load Pu= 4893 KN and a design moment Mu=386 KN.m. f = 27.5 MPa and fy = 414 MPa. Show the cross section of the column including the reinforcement details in your solution.
A masonry terrace of 75 mm concrete surface with 25 mm cement tiles rests on a 75mm×200mm lumber spaced @300mm on centers acting as simple beam with an effective span of 3.6 m. Weight of wood is 7.5 kN/m3 and masonry to be 24kN/m3. Ew=13800 mPa. The allowable stresses are 14 mPa for bending, 0.80 mPa for shear parallel to grain and deflection is 1/360 of span. What is maximum superimposed load that can be carried by the beam?