i. 11. kip B C 2 kip D -3 ft-2 ft2ft 3 ft h = 6 in. = 0.20 in. 4y=0,25 in. b=4 in. 6 kip-ft Derive equations for the shear force V and the bending moment M for any location at least 2 distance X's from A. Draw the shear force and bending diagrams for the beam using the derived functions. Also write the maximum values of V and M as well as the V and M equations.

i. 11. kip B C 2 kip D -3 ft-2 ft2ft 3 ft h = 6 in. = 0.20 in. 4y=0,25 in. b=4 in. 6 kip-ft Derive equations for the shear force V and the bending moment M for any location at least 2 distance X's from A. Draw the shear force and bending diagrams for the beam using the derived functions. Also write the maximum values of V and M as well as the V and M equations.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Using the figure above, determine the internal shear and bending moment at pointsA, B, and C (determine just to the left and just to the right of the points if needed).Sketch V (x) and M(x) for the entire beam. Take a = 2 m and b = 1 m. w = 100 N/m. Can you also show me a shear as well as moment diagram? Thanks
Draw the shear and bending moment diagrams for the beam shown. EI is constant. Use the force method. I have the right answer, it is: VA = 2.90 kN (↑); HA = 0 kN; VB = 6.30 kN (↑); VC = 0.40 kN (↑). To the left); B (right). I don't know how to get to this answer, please show me step by step.
Analyze the statically Indeterminate Beam shown and Draw the shear and Moment Diagram. P =30 kN L = 8m a.) Three moment Equation
GIVEN: L1 = 4.5 m W1 = 10 kN/m L2 = 1.2 m W2 = 12 kN/m L3 = 0.5 m L4 = 12 m L5 = 1.5 m Draw the Shear and Moment Diagrams for: a. Beam A-B-C b. Beam D-E-B
Draw the shear-force and bending-moment diagram for the beam shown. Assume the upward reaction provided by the ground to be uniformly distributed. Let a = 4.2 ft, b = 3.3 ft, P = 22 kips, and w = 2.7 kips/ft. Label all significant points on each diagram. Determine the maximum value of (a) the internal shear force and (b) the internal bending moment.Note that answers may be positive or negative. Here, "maximum" refers to the largest magnitude value, but you should enter your shear force and bending moment with the correct sign, using the sign convention presented in Section 7.2 of the textbook. If the magnitudes of the largest positive and largest negative values are the same, enter a positive number.
The compound beam shown in the figure is fixed at A, a pin connected at B, a roller support at C and external loads 6 kN and 9 kN. (1) Draw the shear and moment diagrams for the beam. (Hint: you must work out using method of section(2) the dimension of the cross section is given, determine the maximum bending stress at the beam.
Draw the shear-force and bending-moment diagram for the beam shown. Assume the upward reaction provided by the ground to be uniformly distributed. Let a = 5.0 ft, b = 4.5 ft, P = 21 kips, and w = 3.0 kips/ft. Label all significant points on each diagram. Determine the maximum value of (a) the internal shear force and (b) the internal bending moment. Note that answers may be positive or negative. Here, "maximum" refers to the largest magnitude value, but you should enter your shear force and bending moment with the correct sign, using the sign convention presented in Section 7.2 of the textbook. If the magnitudes of the largest positive and largest negative values are the same, enter a positive number.
Draw the Normal Force (N), Shear Force (T) and Bending Moment (M) diagrams of the beam whose span and loading condition are given in the figure. H(t)=4 M(tm)=17 q1(t/d)=14 q2(t/d)=8 P (t)=8 a(m)=3
Find the shear and moment equations for the beam loaded as shown if P = 367 lb, W = 180 lb/ft, a = 6 ft, and b = 14.4 ft. Then find the moment 4.12 ft to the right of B.
NEED IN 1HOUR PLS THANKS From the figure, compute for the horizontal and vertical component forces of the hinge at B acting upon member AC as shown.
consider the moment-resisting frame. Use the portal method of analysis. Use P2 = 4 kips What is the shear force in the bottom beams (absolute value)? P1 = 2 kips What is the shear force in member EH (absolute value)? h = 11' What is the horizontal reaction at H (absolute value)? b = 25' What is the bending moment in the top beams (absolute value)? (please ignore black markings) What is the vertical reaction at I (tension positive)?
5. Rod AB is fixed to a smooth collar D, which slides freely along the vertical guide. Determine the internal normal force, shear force, and bending moment at point C, which is located just to the left of the 60-lb concentrated load. Use the sign convention discussed.