first three already answered A Rankine cycle is executed with steam expanding initially from 20 MPaa and 100 deg SH.Condensation occurs at 300 mm HG vac. All expansion and compression efficiencies are 90 %.Sketch the equipment layout and the TS diagram.Answer the following for 10 kg/sec of steam circulated and fill up the blanks in the items below:1.TS diagram with the cycle showing correct location of points with respect to saturation dome linewith ne and nc = 90%. answeredIdeal heat rate in KJ/KW-hr Answer:answered3.Heat rejected at the condenser in KW (Actual) Answer:Actual Rankine engine efficiency % Answer:Ideal Rankine cycle efficiency % Answer:Actual Rankine cycle efficiency using pump and turbine work % Answer:If the generator efficiency = 95%, brake engine efficiencyanswered4.5.6.7.= 90% what is the combined work in KW?%3DAnswer:8.If Cp water = 4.187 KJ/kg-K; cooling water enters the condenser at 12 deg C and leaves at 21 deg C,find amount of cooling water needed by the condenser in kg/sec. (ACTUAL) Answer:9. Torque at the dynamometer if the engine is running at 900 rpm. Answer:10. Combined Steam rate Answer

Answered: Image /qna-images/answer/ab97de62-d587-46c9-962a-67cfe7ac95ec.jpg

Ideal Rankine cycle efficiency % Answer: Actual Rankine cycle efficiency using pump and turbine work % Answer: If the generator efficiency = 95%, brake engine efficiency = 90% what is the combined %3D %3D Answer:

Ideal Rankine cycle efficiency % Answer: Actual Rankine cycle efficiency using pump and turbine work % Answer: If the generator efficiency = 95%, brake engine efficiency = 90% what is the combined %3D %3D Answer:

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter47: High-pressure, Low-pressure, And Absorption Chilled-water Systems

Section: Chapter Questions

Problem 13RQ: The subcooling temperature in a condenser can be measured by taking the difference between the A....

See similar textbooks

Similar questions

Typical head pressures should correspond to a condensing temperature_________ F higher than room temperature at design operating conditions. A. 5-10 B. 10-15 C. 20-35 D. 35-45
The subcooling temperature in a condenser can be measured by taking the difference between the A. suction pressure converted to temperature and the boiling refrigerant. B. boiling temperature and the condensing temperature. C. condensing temperature and the leaving-refrigerant temperature. D). condensing temperature and the entering-refrigerant temperature.
A Rankine cycle is executed with steam expanding initially from 20 MPaa and 100 deg SH.Condensation occurs at T = 86.49 degree Celsius. All expansion and compression efficiencies are 90 %.Sketch the equipment layout and the TS diagram. Answer the following for (m = 10 + SN/10 ) kg/sec of steam circulated and fill up the blanks in theitems below:1. TS diagram with the cycle showing correct location of points with respect to saturation domeline with ne and nc = 90%.2. If the generator efficiency = 95%, brake engine efficiency = 90% what is the brake work in KW?Answer: ______________________3. Actual Steam Rate for the engine in Kg/KW-hr with efficiency values at item 2. Answer: _________________________
A Rankine cycle is executed with steam expanding initially from 20 MPaa and 100 deg SH. Condensation occurs at 399.967 millibars vac. All expansion and compression efficiencies are 90 %. Sketch the equipment layout and the TS diagram. Answer the following for (m = 10 + (SN/5) ) kg/sec of steam circulate and fill up the blanks in the items below: 1. TS diagram with the cycle showing correct location of points with respect to saturation dome line with ne and nc = 90%. 1. Ideal Rankine engine efficiency % Answer: _______________________ 2. Ideal Rankine cycle efficiency % Answer: _______________________ 3. Actual Rankine cycle efficiency using pump and turbine work % Answer: _______________ 7. Actual Rankine cycle efficiency using Qa and Qr values % Answer: _______________ 4. If the generator efficiency = 95%, brake engine efficiency = 90% what is the combined work in KW? Answer: ____________________ 5. If Cp water = 4.187 KJ/kg-K; cooling water enters the condenser at 12 deg C and leaves…
A Rankine cycle is executed with steam expanding initially from 20 MPaa and 100 deg SH. Condensation occurs at 399.967 millibars vac. All expansion and compression efficiencies are 90 %. Sketch the equipment layout and the TS diagram. Answer the following for (m = 10 + (SN/5) ) kg/sec of steam circulated and fill up the blanks in the items below: 1. TS diagram with the cycle showing correct location of points with respect to saturation dome line with ne and nc = 90%. 2. Actual heat rate in KJ/KW-hr Answer: _______________________ 3. Heat rejected at the condenser in KW (Ideal) Answer: _____________________ 4. Ideal Rankine engine efficiency % Answer: _______________________ 5. Ideal Rankine cycle efficiency % Answer: _______________________ 6. Actual Rankine cycle efficiency using pump and turbine work % Answer: _______________ 7. Actual Rankine cycle efficiency using Qa and Qr values % Answer: _______________ 8. If the generator efficiency = 95%, brake engine efficiency = 90% what is…
Steam is delivered to turbine at 5.4 MPa and 600 degree C. Before condensation at 31 degree C, steam is extracted for feed water heating at 0.6 MPa. The turbine exhaust is 60 degree C. the required values of some state point properties are tabulated below. 11. Calculate the thermal efficiency of the cycle
Complete solution; Steam is generated at 4.1 Mpa and 440 OC and condensation occurs at 0.105 Mpa. For a Rankine cycle operating between this limits, determine (a) heat supplied, KJ/kg, (b) heat rejection, KJ/kg, (c) the Work net, KJ/kg, (d) thermal efficiency, and (e) what mass flow rate is required for a net output of 30,000 KW? Kg/s
A single-effect evaporator is being used to concentrate10,000 kg/h of tomato juice from 5% total solids to 30% totalsolids. The juice enters the evaporator at 15°C. The evaporatoris operated with steam (80% quality) at 143.27 kPa. Thevacuum inside the evaporator allows the juice to boil at 75°C.Calculate (a) the steam requirements and (b) steam economyfor the process. Assume the condensate is discharged at 75°C.The specifi c heat of the liquid feed is 4.1 kJ/(kg°C) and theconcentrated product is 3.1 kJ/(kg°C). Make it in the form of an example solution spreadsheet .....
Steam is generated at 4.10 Mpa and 440°C and condensation occurs at 0.105 MPa a. For a Rankine engine operating between these limits, computethe thermal efficiency and the heat rate b. Considering that a Rankine cycle occurs between same limits, determine QA, QR, Wnet and eth c. What mass flow rate is required for a net output of 30 000 kW Don't answer the given problem, just give me the schematic diagram and t-s diagram of the given problem
A reheater cycle is executed of 1kg steam expanding initially from 12.356 Mpa and 540.356oC. The reheater pressures are 2.5356 MPa and the steam leaves the reheater at 420.356oC. Condensation occurs at 0.02356 Mpa. Calculate W, ec and ee.
A Rankine cycle is executed with steam expanding initially from 20 MPaa and 100 deg SH. Condensation occurs at T = 86.49 degree Celsius. All expansion and compression efficiencies are 90 %. Sketch the equipment layout and the TS diagram. Answer the following for (m = 10 + 25/10 ) kg/sec of steam circulated and fill up the blanks in theitems below: 4. Heat rejected at the condenser in KW (Ideal) Answer: ___________________5. Ideal Rankine engine efficiency (% ) Answer: _________________________6. Ideal Rankine cycle efficiency using work of the pump and turbine values % Answer: _________________________
A Rankine cycle is executed with steam expanding initially from 20 MPaa and 100 deg SH.Condensation occurs at 300 mm HG vac. All expansion and compression efficiencies are 90 %.Sketch the equipment layout and the TS diagram. ANSWER THE GIVEN QUESTION Wnet (actual) = 9402.4 Qs (actual) = 27595.4