Identify an engineering firm of your choice Determine the methods used by the firm in handling risk. Do you consider these methods adequate? If not, suggest the appropriate method that must be used.

Q: A. Explain briefly what is an EMS B. If you are hired as project engineer to build a new cement…

A: Note: Hi! Thank you for the question As per the honour code, We’ll answer the first question since…

Q: Incident: 6 people from Contracting Company B doing Kedah Plant maintenance shutdown was caught…

A: Main reasons that causes these incidents based on the preliminary analysis are 1. Psychological…

Q: The fatal accidents in construsction companies are mainly due to defective machinery and equipment…

A: Slips occur where there is less friction or traction between the footwear and the surface. Common…

Q: what are the different approaches to Preventive Maintenance Optimization (PMO)?  Compare between…

A: Preventive maintenance optimization can be defined as it is a method of continuous improvement,…

Q: Select the best answer. How often must waste material and debris be removed to a disposal AND…

A: According to section 1926.252(b).All scrap and waste material shall be removed immediately from the…

Q: ONE objective of Occupational Safety and Health Act

A: A discipline that takes care of physical, mental and social well being of the workers as a 'whole…

Q: What criteria will you used to decide the type of (flume, open ditch, surface pipe or underground…

A: Flumes are specially shaped, engineered structures used to measure the flow of water in open…

Q: What is the importance of safety management?

A: The importance of safety management in construction and safety management system in construction is…

Q: USDA textural classification; and Engineering Behavior Classification by (b) AASHTO, and (c) USCS.…

A:

Q: Discuss the areas of concern to an inspector while he is undertaking a vessel suitability inspection…

A: Inspection of any sort of work is an important parameter for ensuring its safety, performance and…

Q: Which parties are liable to attend the preconstruction conference?

A: The conference or meeting held before the start of a job, especially in mega projects to define and…

Q: Engineering Management ,i need solutions in 10 minutes please. MCQ/The delay time in starting or…

A: To determine: The delay time in starting or finishing an activity without affecting on the total…

Q: The employee must assess the workplace to determine if hazards are present that necessitate the use…

A: True  It is required for the employers to perform a PPE assessment to determine whether hazards are…

Q: Tailings dam failures have been predominant in mining operations. Outline five (5) causes of…

A: Nowadays mining industry has prominent impact modern life and its products are widely used in…

Q: Conduct a lock-out and tag-out activity in the oil rig to repair the drilling equipment and…

A: lock out and tag out process is used for safety of  workers . it is used to check for the whether…

Q: boat push nets allowed to operate in municipal waters

A: Municipal water is also known as tap water, it is the water that we receive in our homes.  The…

Q: You are an environmental engineer for one of the many local plants. That plant discharges effluents…

A: Solution: As an environmental engineer the basic responsibilities are to monitor the water and air…

Q: How can the safety engineer advise the operating management staff on safety and health matters?

A: The engineer who is related to safety regulations on site and the life critical systems behave in…

Q: Q1 Building management system (BMS) is a new technology that is very beneficial during the…

A: Building management system (BMS) refers to a computer-based control system that needs to be…

Q: What is consolidation? Explain the concept of NCR and OCR with examples [in your own words

A: Solution- Consolidation is a process in which volume of soil change due to expulsion of pore…

Q: In such cases if the field test does not meet the project specifications, what remedial actions…

A: Compaction is the process of increase of density of soil by mechanical mean. If it is not maintained…

Q: Given the AADT of Truck II and III is equal to 1000 and 100, their EALFs=1.3 and 0.5. Please…

A: Given, AADT EALFs Truck II =1000 1.3 Truck III = 100 0.5

Q: You are a Project Manager of a building construction project in Johor. The inspection of water…

A: Introduction : A one-man-band project manager often charges a basic percentage of the total…

Q: least 3 possible biological hazards in construction,

A: Construction process involves the use of various building material. These building material either…

Q: What is the hazard? Give example. How can identified the hazard? How can control the risk?

A: HAZARD (Definition and Example) There are many definitions for hazard but the most common definition…

Q: What is consolidation? Explain the concept of NCR and OCR with examples

A: Consolidation and the concept of NCR and OCR are explained in the next step.

Q: 4- What actions should be taken by Engineer 1 based on the NSPE code of ethics? (Total 8 points)…

A: Solution: 1. In order to avoid having an ethical dilemma with the employer, Engineer 1 as per the…

Q: In your own words, discuss the provision of the OSH standards that says, 1. All appropriate…

A: Brief concept- OSH Standards- Occupational health and safety is a branch of public health concerned…

Q: Discuss at least three (3) SPECIFIC environmental hazards in an on going construction job located in…

A: Extreme events or substances in the Earth and its ecological systems are characterized as…

Q: 9) Obstacles of planning could be : a. Predicted risks b. Re- structuring c. Absence of monitoring…

A: Planning is a process of organizing various activities in required format, so as to achieve a…

Q: (A) What are the differences between coagulation and flocculation processes wit ct to their working…

A: INTRODUCTION:- Efficiency of sedimentation tank is very less if consist of fine suspended particle.…

Q: Occupational Health & Safety is the anticipation, recognition, evaluation and control of hazards in…

A: solution  True  the main aim of this act is to reduce and control  the hazards that occur  in work…

Q: A person working on a farm is covered by the Occupational Health and Safety Act. O True O False

A: A person working on a farm is covered by the Occupational Health and Safety Act. This statement is…

Q: True or False: The Williams-Steiger Occupational Safety and Health Act of 1970 (“OSHA”) [Title 29…

A: True or False: The Williams-Steiger Occupational Safety and Health Act of 1970 (“OSHA”) [Title 29…

Q: search at least five (5) modern technologies used in the mitigation of liquefaction hazard.…

A: Liquefaction is a procedure which generally naturally happens where the shear strength of soil mass…

Q: What are the points of convergence and divergence in the approaches to waste management hazardous…

A: Convergence and divergence in the approaches to waste management  Even in the developed countries…

Q: Discuss and provide appropriate examples of application on how "lean construction nd 'value…

A: Given to give Examples on application of lean construction and value engineering that contribute to…

Q: 1. Enumerate the processes and Controls and management of the following Risk and hazards. A. Types…

A: Answers (A)   Following are the  types of Accident to be investigated and reported :-    1.   Death…

Q: The use of protective devices or clothing required by the employer is at the discretion of the…

A: Given Statement : The use of protective devices or clothing required by the employer is at the…

Q: The Workplace Safety and Insurance Board is controlled by:

A: solution  The workplace safety and insurance board plays a important role in province occupational…

Q: A company designs, builds, and sells prefabricated commercial buildings. During a recent heavy…

A: Option D is correct  Insurance policy has an 'Act of God ' clause.

Q: obligation of the presidents and engineers in terms of haz

A: To provide for research, information, education, and training in the field of occupational safety…

Q: Determine three considerations that should inspire a contractor to operate in a safe manner and…

A: Introduction: Maintaining safety and implementing a safety program is a requirement at all work…

Q: QUESTION 1 Which of the following statements is false? O a. Bent trees can cause slope of grain in…

A: Timber wood- It's a sort of timber/wood. It is utilised in the construction of houses, etc. It acts…

Q: can you help me with this question? what do you think are some of the problems that using pumping…

A: Pumping: A concrete pump is a mechanism that pumps liquid concrete from one location to another.…

Q: In the last 6 months, ABC Sdn. Bhd. has experienced a few cases of workplace accidents involving the…

A: There are different steps in the analysis of the safety. These steps should have to follow properly,…

Q: Question 6 of 10 An engineer chooses to use a natural adhesive for a building project instead of a…

A: Option C is correct  An engineer chooses to use a natural adhesive for a building project instead of…

Q: Discuss how a well-trained, well-prepared IH helps to deal with unexpected health hazards and also…

A: Discuss how a well-trained, well-prepared IH helps to deal with unexpected health hazards Unexpected…

Electric Circuit and Components

An electrical circuit or electrical network is a pre-determined pathway to make the electrons flow in the desired direction. The flow of electrons will set up a current flow in the circuit. Normally, the flow of electrical current is opposite to the flow of electrons. An electron is a fundamental sub-atomic particle of an atom possessing a negative charge. To initiate the flow of current and achieve the desired output, the electrical circuit should necessarily be composed of closed pathways. The pathways are made-up of good conductors of electricity such as aluminium and copper.