If a 7 meter simply supported beam carrying a uniformly distributed load of 20 KN/m all throughout its length is made using the given section with modulus of elasticity equal to 200 GPa, determine the deflection at the midspan. (mm) If the maximum deflection at the midspan is set to 3 mm, determine the maximum uniformly distributed load that a 7 meter simply supported beam could carry if it is made using the given section with modulus of elasticity equal to 200 GPa. (KN/m) If the maximum deflection at the midspan is set to 5 mm, determine the longest possible simply supported beam that could carry a uniformly distributed load of 20 KN/m. The beam is made using the given section with modulus of elasticity equal to 200 GPa. (m)

If a 7 meter simply supported beam carrying a uniformly distributed load of 20 KN/m all throughout its length is made using the given section with modulus of elasticity equal to 200 GPa, determine the deflection at the midspan. (mm) If the maximum deflection at the midspan is set to 3 mm, determine the maximum uniformly distributed load that a 7 meter simply supported beam could carry if it is made using the given section with modulus of elasticity equal to 200 GPa. (KN/m) If the maximum deflection at the midspan is set to 5 mm, determine the longest possible simply supported beam that could carry a uniformly distributed load of 20 KN/m. The beam is made using the given section with modulus of elasticity equal to 200 GPa. (m)

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A 6m simply supported beam AB carries 2 concentrated downward loads of P=26KN each placed at third points of the beam span. With constant EI=21000 KN-m2. Using Double Integration Method (DIM) with origin taken at point A (left support) where 0 ≤ x ≤ 6m, calculate the maximum deflection of the beam? Express your answer in "mm" in 2 decimal places. Include (-) negative sign if deflection is downward.
A circular beam carries a concentrated and a distributed load as shown in the figure. Determine the following unknowns if the modulus of elasticity is 90GPa and the maximum shear is 444.9kN. Let, P=170kN, a=2.5m, b=1m and c=3m ; If the deflection at the free end (leftmost part of the beam) is equal to -14.183444485219mm, Determine the radius of the cross-section of the circular beam. Determine the slope at the free end of the beam
(a) Compute the vertical deflection and slope of the cantilever beam at points B and C in Figure P8.20. Given: EI is constant throughout, L = 12 ft, and E = 4000 kips/in.2 . What is the minimum required value of I if the deflection of point C is not to exceed 0.4 in.?
A 6m simply supported beam AB carries 2 concentrated downward loads of P=88KN each placed at third points of the beam span. With constant EI=21000 KN-m2. Using Double Integration Method (DIM) with origin taken at point A (left support) where 0 ≤ x ≤ 6m, calculate the first constant of integration, C1? Express your answer in KN-m2 in 2 decimal places.
Using Unit Load Method. Determine the slope and deflection at point B of the beam shown if the figure. Let ? = 29x10^3 ksi and I= 800in^4.
A 6m simply supported beam AB carries 2 concentrated downward loads of P=65KN each placed at third points of the beam span. With constant EI=21000 KN-m2. Using Double Integration Method (DIM) with origin taken at point A (left support) where 0 ≤ x ≤ 6m, calculate the slope at the left support A? Express your answer in "degrees" in 3 decimal places. Take note that 180 degrees = pi radians.
3. A simply supported beam of length 4 m carries a uniformly distributed load of 3 kN/m throughout its length. Determine the maximum deflection using the moment area method
A simply supported beam, 12m long is subjected to a concentrated load of 8000N at a distance of 9m from the left support. If E = 200GPa and I = 60 x 10^6 mm^4. Determine the location of the maximum deflection from the left support. Determine the maximum deflection of the beam.
A cantilever beam carries a trapezoidaldistributed load (see figure). Let wB = 2.5 kN/m,wA = 5.0 kN/m, and L = 2.5 m. The beam has amodulus E = 45GPa and a rectangular cross sectionwith width b = 200 mm and depth h = 300 mm.Use the method of superposition and Cases 1 and8 in Table H-1 to calculate the def lection and rotationat B.
Calculate the value of the deflection at point B due to uniformly distributed load w in the form answer in kNm3 to three decimal places. Assume the positive direction of deflection in the positive direction of v axis.
Compute the maximum deflection of the W10 x 39 cantilever beam shown? Neglect the weight of the beam. Assume E = 29 xl0^6 psi and Ix = 209 in^4.
For the beam shown, EI = constant, E = 200 GPa and I = 6x10⁶mm⁴. Determine the following: A. Slope at B B. Deflection at C C. Location of the maximum deflection D. Maximum deflection