In a Porter governor, the upper and lower arms are each 250 mm long and are pivoted on the axis of rotation. The mass of each rotating ball is 3 kg and the mass of the sleeve is 20 kg. The sleeve is in its lowest position when the arms are inclined at 30° to the governor axis. The lift of the sleeve is 36 mm. Find the force of friction at the sleeve, if the speed at the moment it rises from the lowest position is equal to the speed at the moment it falls from the highest position. Also, find the range of speed of the governor. [Ans. 9.8 N ; 16 r.p.m.]

In a Porter governor, the upper and lower arms are each 250 mm long and are pivoted on the axis of rotation. The mass of each rotating ball is 3 kg and the mass of the sleeve is 20 kg. The sleeve is in its lowest position when the arms are inclined at 30° to the governor axis. The lift of the sleeve is 36 mm. Find the force of friction at the sleeve, if the speed at the moment it rises from the lowest position is equal to the speed at the moment it falls from the highest position. Also, find the range of speed of the governor. [Ans. 9.8 N ; 16 r.p.m.]

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter7: Dry Friction

Section: Chapter Questions

Problem 7.72P

See similar textbooks

Similar questions

In a Porter governor, the mass of the central load is 18 kg and the mass of each ball is 2 kg. The top arms are 250 mm while the bottom arms are each 300 mm long. The friction of the sleeve is 14 N. If the top arms make 45° with the axis of rotation in the equilibrium position, find the range of speed of the governor in that position. 503.2
In a porter governor the mass of the central load is 18 kgand the mass of each ball is 2kg. the top arms (254) mm while the bottom arms are (304) mm long. The friction of the sleeve is 20 N. If the top arms make 45 deg with the axis of rotation in the equilibrium position, find the range of the speed of the governor in that position
In a modified version of the cart and bucket, the angle of the slope is alpha = 34.9∘ and the bucket weighs 295 N. The cart moves up the incline and the bucket moves downward, both at constant speed. The cable has negligible mass, and there is no friction. What is the weight of the cart?What is the tension in the cable?
In a Porter governor, the mass of the central load is 18 kg and the mass of each ball is 2 kg. The toparms are 250 mm while the bottom arms are each 300 mm long. The friction of the sleeve is 14 N. Ifthe top arms make 45° with the axis of rotation in the equilibrium position, find the range of speed ofthe governor in that position.
The angle of the slope 23.0∘ and use a different cart and a different bucket. You observe that the cart and bucket remain at rest when released and that the tension in the cable of negligible mass is 175 N. There is no friction. What is the weight of the cart? What is the combined weight of the cart and bucket?
Find the forces exerted by the smooth planes on cylinder C (cylinder D is absent for this problem). Cylinder C has a mass of 100 kg.
A man pulls up box of mass 70kg using an inclined plane of effective length 5m onto a platform 2.5m high at uniform speed. If the frictional force between the box and the plan is 100N draw the diagram of all the forces acting on the box when in motion and calculate the (a) minimum effort applied in pulling up the box (b) velocity ratio of the plane (c) machanical advantage of the plane
Blocks A, B, and C are placed as in Fig. and connected by ropes of negligible mass. Both A and B weigh 25.0 N each, and the coefficient of kinetic friction between each block and the surface is 0.35. Block C descends with constant velocity. (a) Draw separate free-body diagrams showing the forces acting on A and on B. (b) Find the tension in the rope connecting blocks A and B. (c) What is the weight of block C? (d) If the rope connecting A and B were cut, what would be the acceleration of C?
A Boeing 777-200 commercial jet weighs, fully loaded, 325,000 kg. The pilot places the turbines in maximum power condition for takeoff (before releasing the aircraft's brakes), situation in which they generate 450 kN of thrust in each turbine. Neglecting aerodynamic and bearing, estimate runway length and time necessary to achieve the speed of takeoff of 225 km / h. consider constant thrust in the two turbines during the journey on the ground.
the cylinder with a mass m1=2kg and radius r=0,1m is placed at a plate with mass m2=4kg. We are applying force F at this plate. Find an acceleration of the plate, when the friction coefficient μ=0,2
A ball is shot at high speed into a frictionless channel that is in the shape of a segment of a circle with center at O.The channel is frictionless and sits on a horizontal table top.The figure shown is the top view.Which of the following force(s) are acting on the ball when it is within the frictionless channel at position B? Explain your answers.Check all that apply.1- A downward force of gravity.2- A force pointing from O to B.3- A force in the direction of motion.4- A force pointing from B to O.
The upper and lower arms of a three-fly ball Porter governor are each 350mm long and pivoted on the axis of rotation. The mass of each fly ball is 3 kg and that of the sleeve is 45kg. The radius of rotation of the balls ranges from 100mm to 200 mm. If the friction force between the sleeve and the spindle is 25 N, find the speed range of the governor.