I want answer in 15 minutes if you provide i will give like else dislike (ii): In residential house, the following are the loads connected;(1) 55W fluorescent tubes - 4 Nos., switched on for 4 hours in a day60W incandescent lamps-2 Nos., switched on for 2 hours in a day,70W ceiling fan - 3 Nos., switched on for 12 hours a day(iv) 225W refrigerator, switched on for 10 hours a day,(iii)(v) 200W washing machine, switched on for 1 hours a day,(vi) 150W T.V. switched on for 6 hours a day,If the cost of electricity is Rs. 4/unit, what will be the monthly charges ?2015

We have an load connection of residential house as given in the question We have to determine the…

: In residential house, the following are the loads connected; 55W fluorescent tubes - 4 Nos., switched on for 4 hours in a day 60W incandescent lamps-2 Nos., switched on for 2 hours in a day, (iii) 70W ceiling fan - 3 Nos., switched on for 12 hours a day (iv) 225W refrigerator, switched on for 10 hours a day, (v) 200W washing machine, switched on for 1 hours a day, (vi) 150W T.V. switched on for 6 hours a day, If the cost of electricity is Rs. 4/unit, what will be the monthly charges ? (1)

: In residential house, the following are the loads connected; 55W fluorescent tubes - 4 Nos., switched on for 4 hours in a day 60W incandescent lamps-2 Nos., switched on for 2 hours in a day, (iii) 70W ceiling fan - 3 Nos., switched on for 12 hours a day (iv) 225W refrigerator, switched on for 10 hours a day, (v) 200W washing machine, switched on for 1 hours a day, (vi) 150W T.V. switched on for 6 hours a day, If the cost of electricity is Rs. 4/unit, what will be the monthly charges ? (1)

Electricity for Refrigeration, Heating, and Air Conditioning (MindTap Course List)

10th Edition

ISBN:9781337399128

Author:Russell E. Smith

Publisher:Russell E. Smith

Chapter13: Heating Control Devices

Section: Chapter Questions

Problem 1RQ

See similar textbooks

Similar questions

What size 4-wire, three-phase, 400Y / 230 V service is required for a multifamily building with thirty 150 sq. m units, where each unit contains the following loads? Dishwasher = 1,200 VA; Water Heater = 4,500 VA ; Waste Disposal = 900 VA; Dryer = 4,000 VA Cooktop, 6,000 VA; Oven = 3,000 VA; Heat = 7,000 VA; Air-Conditioning = 6,440 VA [Use optional Method] A.2 sets of 125 mm^2 THHN B.2 sets of 100 mm^2 THHN C.2 sets of 80 mm^2 THHN D.2 sets of 60 mm^2 THHN
A single family dwelling with a floor area of 80 square meters has the following receptacles and outlets load: a. Lighting 7 pcs – 40 watts fluorescent lamp 2 pcs – 20 watts LED lamp b. Convenience outlet 1 – Electric Iron ; 1,000 watts 1 – Portable Stereo; 100 watts1 – Electric Stove ; 1,100 watts 1 – Electric Fan ; 500 watts 7 cu. ft. Refrigerator; 175 watts Required:Size of the Service Entrance or Feeder a. What is the Size of the Conduit Pipe? b. What is the Size of the Main Protection?
A house has the following specifications for a circuit. Determine the size of the circuit breaker, wire, and size of pipe to be used for each circuit and the service entrance. Show computation and tabulate final answer.1. 15 lighting outlets2. 1 kitchen range3. 12 lighting outlets4. 1 water heater at 1500 watts5. 12 convenience outlet6. 8 convenience outlet7. 9 convenience outlet8. 12 lighting outlet9. 3 convenience outlet10. spare-1500 watts11. spare- 1500 watts
11.a. In dwelling units, motels, hotels, and other occupancies such as dormitories, nursing homes, and similarresidential occupancies, any luminaire or receptacle for plug-connected loads rated up to 1440 VA, or lessthan ¼ HP, shall be supplied at not more thanA. 277 V.B. 50 V.C. 120 V.D. 600 V. 11.b. A feeder neutral with a load of 400 A would be permitted the demand factor applied to ________of theload.A. 140 AB. 340 AC. 200 AD. 100 A
1)-Check your "residential electrical connection (your house connection)" (like electrical power input, load distribution etc.) and answer the following in detail (i) Type of supply (Single or Three phase) (ii) Main DB and its ratings. (iii) Electrical layout of your house. (iv) Total load connected.
a) In a Power System, Define the following (i) Peak Load (ii) Spinning Reserve b) With a neat diagram, explain the working of the Solar Power Plant? 2. What are the various types of Line supports of the transmission line? Draw a neat sketch of any one type. Please do not write the answer on a paper
In an urban area, 22 families are staying in a 10-storied building. Due tothe load shedding problem they have decided to install solar home systemon the rooftop. The people in that building will use A.C. for basic needs likelight, fan, T/V. Each family will run 3 lamps of 15 W each, 2 lamps of 7 Weach, 2 fans of 75 W each and a TV of 120 W during the load sheddingperiod of 3 hours daily. At that location 1 kW/m2 or more radiation will beavailable from 10.30 am to 3.30 pm. As a Design Engineer you have askedto prepare a complete design and make a list of components you require.
A house has the following electrical appliance usage: - One 32 Watt fluorescent lamp with electronic ballast used 6 hours per day. - One 75 Watt fan used for 3 hours per day. - One 100 Watt refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours. - The system will be powered by 12 Vdc, 110 Wp PV module. a) What is total PV panels energy needed in Wh/day? b) What is the total PV panel capacity in Wp? c) How many 100Wp PV panel modules are needed? d) What is the required minimum inverter size in W? Provide additional 30% allowance. e) What is the Total Ampere-hours required for the battery in Ah for 3-day autonomy? f) What is the solar charge controller current in A? Provide 30% allowance
An underground paper -insulated, copper conductor cable is used to supply a 2 MVA 11 kV transformer from a utility supply which is 3 km away. The depth of burial of the cable is 1.5 m. Ground thermal resistance is 2.5 Km/W. The ground temperature is 30°C and there are no other cables in the trench.calculate a) full load current and cable size to limit voltage drop below 2.5%
a) A 380V, 7.5kW electric water pump of power factor 0.8 lagging and efficiency of 85% will be wired by an armoured XLPE insulated copper cable. The circuit will be run on cable tray with three other similar circuits at an ambient temperature of 40℃. MCCB will be used as the overcurrent protective device for the circuit. The estimated length of the circuit for the machine is 50m. i) Determine the minimum rating of MCCB for the circuit, available MCCB rating are 25A, 30A, 40A, 50A ii) Determine the minimum cable size of the circuit if the allowable voltage drop of the circuit is 1.5% of the nominal supply voltage?
A certain company is required to power up its lighting devices using Solar power. System requirement:24 Volts System, 36 Amperes SystemAvailable Solar Panel to use:100 W, 12 V, 6 AmperesDesign the Solar Panel Array to satisfy the requirement of the company, assuming battery pack is already good and settled. Draw connections and show computations
Please show a complete step-by-step solution. Thank youGive your final answers in at least 2 decimal places - make it 3 or 4 decimal places whenever required in the problem. If you are doing a step by step calculation, maintain 6 decimal places in your in-between calculations to hit good accuracy in your final answers. Use 1 hp = 746 Watts in your conversion whenever necessary. A 110-hp, three-phase, wye-connected, 50-Hz, 460-V, four-pole, cylindrical-rotor synchronous motor is operating at rated conditions and 88 percent power-factor leading. The efficiency, excluding field and stator losses, is 95 percent, and the synchronous reactance is 2.81 Ohms/phase. Determine the developed torque in lb-ft. Give your final answer in 2 decimal places. Correct Answer: 405.42 ± 0.01