Knott's Industries manufactures standard and super premium backyard swing sets. Currently it has four identical swing-set-making machines, which are operated 275 days per year and 8 hours eachday. A capacity cushion of 20 percent is desired. The following information is also knownAnnual DemandStandard Processing TimeAverage Lot SizeStandard Setup Time per Lota. Does Knott's have sufficient capacity to meet annual demand?Knott's doesStandard Model20,0005min5030 minSuper Premium Model10,00017 min3045 minhave sufficient capacity to meet annual demand because 3 machines are needed. (Enter your response rounded up to the next whole number.)b. If Knott's was able to reduce the setup time for the Super Premium Model from 45 minutes to 30 minutes, would there be enough current capacity to produce 20,000 units of each type ofswing set?If Knott's was able to reduce the setup time for the Super Premium Model from 45 minutes to 30 minutes, there would not be enough capacity to produce 20,000 units of each type of swing setbecausemachines are needed. (Enter your response rounded up to the next whole number.)

Additional notes:Annual capacity = i / dAllocation = manually assigned based on available…

Answered: Knott's Industries manufactures…

Practical Management Science

6th Edition

ISBN:9781337406659

Author:WINSTON, Wayne L.

Publisher:WINSTON, Wayne L.

Chapter2: Introduction To Spreadsheet Modeling

Section: Chapter Questions

Problem 20P: Julie James is opening a lemonade stand. She believes the fixed cost per week of running the stand...

See similar textbooks

Similar questions

Which is a viable strategy to manage an intermittent flow system better? Develop a planning methodology without estimating the available capacity Cut down the variety of offerings thereby gaining better control on operations Redesign the operating system by creating sub-systems Increase the volume of all offerings
PT Bulan Sabit is a company engaged in fan manufacturingair conditioner with the following production datai. Setup fee = $15ii. Inventory cost per fan per year = $ 125iii. Production capacity per day = 246 fansiv. Production time per fan = 2 daysv. Fan requirement per year = 20,000 fansvi. Safety stock = 1/2 day fan productionIf PT Bulan Sabit wants to implement Kanban, then calculate the needs of the companyas follows:a) Explain the definition and purpose of kanban b) Specify production order quantity c) Calculate the container kanban that must be provided by PT Bulan Sabit Assuming the time used is per year 50 weeks and 5 days per week
29) XYZ Company The XYZ Company uses 175 handles per day. The company operates 300 days per year. It costs $2.00 to carry one handle in inventory for one year. When handle inventory is low, an order is sent to the fabrication department to manufacture more handles. Fabrication can produce handles at a rate of 1500 per day and send the handles over to assembly while production is in progress. The setup for each production run costs $500. In order to calculate the EOQ, the XYZ company utilizes the __________ model. Group of answer choices a) Basic EOQ b) Production Quantity c) Optimal Production
Tuff-Rider, Inc., manufactures touring bikes and mountainbikes in a variety of frame sizes, colors, and component com-binations. Identical bicycles are produced in lots of 100. Theprojected demand, lot size, and time standards are shown inthe following table: Item Touring MountainDemand forecast 5,000 units/year 10,000 units/yearLot size 100 units 100 unitsStandard processing time .25 hour/unit .50 hour/unitStandard setup time 2 hours/lot 3 hours/lot The shop currently works 8 hours a day, 5 days a week,50 weeks a year. It operates five workstations, each producingone bicycle in the time shown in the table. The shop main-tains a 15 percent capacity cushion. How many workstationswill be required next year to meet expected demand withoutusing overtime and without decreasing the firm’s currentcapacity cushion?
Save Charles Lackey operates a bakery in Idaho Falls, Idaho Because of its excellent product and excellent location, demand has increased by 25% in the last year. On far too many occasions, customers have not been able to purchase the bread of their choice. Because of the size of the store, no new ovens can be added At a staff meeting, one employee suggested ways to load the ovens differently so that more loaves of bread can be boked at one time. This new process will require that the overs Employees are paid $8 per hour. In addition to the labor cost, Charles also has a constant utility cost per month of $550 and a per loaf ingredient cost of $0.50 loaded by hand, requiring additional manpower. This is the only production change that will be made in order to meet the increased demand. The bakery cuently makes 1,500 loaves per month Cument multifactor productivity for 640 work hours per month-loavesidolar (round your response to three decimal places
JB Bunt's fleet repair facility has the capacity to repair 800 trucks per month. However, due to scheduled maintenance of their equipment, management feels that they can repair no more than 600 trucks per month. Last month, two of the employees were absent several days each, and only 400 trucks were repaired. What is the utilization of the repair shop?
29 Meritor is so pleased with the outcome from previous suggestions that the consultants are invited back for more work. The consultants now suggest a more complete robotic automation of the making of muffler assemblies and also a reduction in container size to five per container. Meritor implements these suggestions and the result is that the muffler assembly fabrication cell now averages approximately 20 assemblies per hour, and the catalytic converter assembly cell can now respond to an order for a batch of catalytic converters in one hour. The safety stock remains at 11.5 percent. How many kanban cards are needed? Note: Round up your answer to the next whole number.
If 10 pallets are received each 8-hour day, what is the average number of pallets in the system on any given day? Stocking 9 persons 1. 5 hpp S/R Cycle Count person 0.5 hrs/pallet (hpp) Pricing 2 persons 1.25 hpp 1 person 0.25 hpp Spotting 1 persons 0.2 hpp O 10 pallets O 4.713 pallets O 4.375 pallets O125 pallets O Impossible to determine
Knott’s Industries manufactures standard and superpremium backyard swing sets. Currently it has four identi-cal swing-set-making machines, which are operated 250days per year and 8 hours each day. A capacity cushionof 20 percent is desired. The following information is alsoknown:Standard ModelSuper PremiumModelAnnual Demand 20,000 10,000Standard Processing Time 7 min 20 minAverage Lot Size 50 30Standard Setup Time per Lot 30 min 45 mina. Does Knott’s have sufficient capacity to meet annualdemand?b. If Knott’s was able to reduce the setup time for the SuperPremium Model from 45 minutes to 30 minutes, wouldthere be enough current capacity to produce 20,000 unitsof each type of swing set?
A company that makes shopping carts for supermarkets and other stores recently purchased somenew equipment that reduces the labor content of the jobs needed to produce the shopping carts.Prior to buying the new equipment, the company used five workers, who produced an average of80 carts per hour. Workers receive $10 per hour, and machine cost was $40 per hour. With the newequipment, it was possible to transfer one of the workers to another department, and equipment costincreased by $10 per hour while output increased by four carts per hour.a. Compute labor productivity under each system. Use carts per worker per hour as the measure oflabor productivity.b. Compute the multifactor productivity under each system. Use carts per dollar cost (labor plusequipment) as the measure.c. Comment on the changes in productivity according to the two measures, and on which one youbelieve is the more pertinent for this situation.
A company that makes shopping carts for supermarkets and other stores recently purchased somenew equipment that reduces the labor content of the jobs needed to produce the shopping carts.Prior to buying the new equipment, the company used five workers, who produced an average of80 carts per hour. Workers receive $10 per hour, and machine cost was $40 per hour. With the newequipment, it was possible to transfer one of the workers to another department, and equipment costincreased by $10 per hour while output increased by four carts per hour.a. Compute labor productivity under each system. Use carts per worker per hour as the measure oflabor productivity.
The boss at the Precision Machine Shop needs to de-finish the personnel policy,which minimises all running expenses. The overall delivery time at the crib where instruments are available Eight machinists every hour are dispensed to staff. Each one. Each one.Wage of machinist is $20 an hour. The boss should employ the crib with a junior coach who pays $5 per hour.and can handle 10 arrivals an hour or attendant paying $12 an hour was able to handle 16 arrivals every hourHour. Hour. Which individual is selected and what is selected?Be the approximate average hourly cost?

SEE MORE QUESTIONS

Recommended textbooks for you

Practical Management Science

Operations Management

ISBN:

9781337406659

Author:

WINSTON, Wayne L.

Publisher:

Cengage,

Operations Management

ISBN:

9781259667473

Author:

William J Stevenson

Publisher:

McGraw-Hill Education

Operations and Supply Chain Management (Mcgraw-hi…

Operations Management

ISBN:

9781259666100

Author:

F. Robert Jacobs, Richard B Chase

Publisher:

McGraw-Hill Education

Practical Management Science

Operations Management

ISBN:

9781337406659

Author:

WINSTON, Wayne L.

Publisher:

Cengage,

Operations Management

ISBN:

9781259667473

Author:

William J Stevenson

Publisher:

McGraw-Hill Education

Operations and Supply Chain Management (Mcgraw-hi…

Operations Management

ISBN:

9781259666100

Author:

F. Robert Jacobs, Richard B Chase

Publisher:

McGraw-Hill Education

Business in Action

Operations Management

ISBN:

9780135198100

Author:

BOVEE

Publisher:

PEARSON CO

Purchasing and Supply Chain Management

Operations Management

ISBN:

9781285869681

Author:

Robert M. Monczka, Robert B. Handfield, Larry C. Giunipero, James L. Patterson

Publisher:

Cengage Learning

Production and Operations Analysis, Seventh Editi…

Operations Management

ISBN:

9781478623069

Author:

Steven Nahmias, Tava Lennon Olsen

Publisher:

Waveland Press, Inc.

SEE MORE TEXTBOOKS