Liquid is held into two components Separated by a membrane.the total volume is 775ft3 and the volume of compartment Y is 300ft3 and it’s specific volume is 9.55ft3/lb.the membrane breaks and the resulting specific volume is 12.5 ft3/lb. a) determine the original specific volume in compartment X b)after breaking the membrane,the temperature of the liquid is 3 degree centigrade.if the absolute temperature of this reading is doubled and decreased by 239 degrees,what would be the final temperature of the maximum degree Celsius and degree Rankine

Liquid is held into two components Separated by a membrane.the total volume is 775ft3 and the volume of compartment Y is 300ft3 and it’s specific volume is 9.55ft3/lb.the membrane breaks and the resulting specific volume is 12.5 ft3/lb. a) determine the original specific volume in compartment X b)after breaking the membrane,the temperature of the liquid is 3 degree centigrade.if the absolute temperature of this reading is doubled and decreased by 239 degrees,what would be the final temperature of the maximum degree Celsius and degree Rankine

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter1: Basic Modes Of Heat Transfer

Section: Chapter Questions

Problem 1.22P: 1.22 In order to prevent frostbite to skiers on chair lifts, the weather report at most ski areas...

See similar textbooks

Similar questions

6. If 8 lbs of a substance receives 240 Btu of heat at constant volume and undergo a temperature change of 150oF. What is the average specific heat of the substance during the process? (3 DECIMALS IN FINAL ANSWER PLS)
A fluid has a volume of 8.7m^3 and a weighs 53500N. Determine its unit density in kg/m^3 Choices are: A. 626.85 B. 662.85 C. 636.85 D. 662.85
The production data for a well is as follows; 450 bbl/day of water 2800 bbl/day of 34.5o API oil 9.85 mscf/day of gas What is the density of the oil in kg/m3? (Input your answer in the space below to 2 decimal places)
A fluid has a volume of 8.7m^3 and a weighs 53500N. Determine its unit weight in N/m^3 Choices are: A. 6149.43 B. 6449.43 C. 6419.43 D. 6119.43
A spherical research balloon is filled with 420 m3 of atmospheric air at a temperature of 10°C. If the air inside the balloon is heated to 80°C according to PVn =C, where n = 0. What will be the final diameter of the balloon? show cancellation of units and formula used
The temperature of a system rises by 130°C during a heating process. Express this rise in temperature in kelvins.
5. If 10 m3 of atmospheric air at zero degrees centigrade temperature are compressed to a volume of 1 m3 at 100oC, what will be the pressure of air in kPa? (3 DECIMALS IN FINAL ANSWER PLS)
Water at 210°C is heated, which increases the internal energy of the water by 1000 kJ/kg. Initially the quality of the system is 0.9. What is the final temperature, in °C, if the final pressure is 1.8 MPa? Report your answer to one decimal place.
A body weighs 1000 lbf when exposed to a standard earth gravity g = 32.174 ft/s2. (a) What is its mass in kg? (b) What will the weight of this body be in N if it is exposed to the moon’s standard acceleration gmoon = 1.62 m/s2? (c) How fast will the body accelerate if a net force of 400 lbf is applied to it on the moon or on the earth? (3 DECIMAL PLACES IN FINAL ANSWER PLS)
2. A compressed air tank has a volume of 0.85 m3. When the tank is filled with a gauge pressure of 3 bar, determine density of air and weight of air in the tank. Assume temperature of air 15°C. (3 DECIMAL PLACES IN FINAL ANSWER PLS)
A spherical balloon holding 25 lb of air has a diameter of 9 ft. For the air, determine(a) the specific volume, in ft3/lb, and (b) the weight, in lbf. Let g = 31.0 ft/s2.
A closed piston-cylinder contains 5-kg of water. Initially, the temperature of the water is 225°C while the volume is 0.25 m3. The container is then isothermally expanded until the volume increases to 0.5 m3. a) Determine the final pressure, in MPa. Report your result to two decimal places using rounding. b) Determine the initial pressure, in kPa. Write your answer to one decimal place. c)Determine the change of internal energy of the system, in kJ. Report your answer to one decimal place using rounding.