Problem Solving: Input your final answer on the space provide.Note: Use three decimal places and no need to input the unit.In Figure the 20°C water and gasoline are open to the atmosphere and are at the same elevation. What is the height h in the third liquid?-gasoline1.5 mwaterh1 mLiquid, SG=1.60RatioRatioFluldAgim-kg/m1.05 E-41.51 E-5Hydrogen8.8 E-618 E-52.9 E-41.00.084920Air2.11.20130Gasoline336804.22 E-73.7Water1O E-3114998LOI E-68.7Ethyl alcoholMercury1.2 E-31351707891.52 E-6131.5 E-313,5801.16 E-71.0SAE 30 oil0.2933,000170,0003.25 E-42,85010,300891Glycerin1.51,264LI8 E-3'I kel(m s)- 0.0209 slug/ft s); I m's- 10.76 n's.

Name: Problem Solving: Input your final answer on the space provide.Note: U
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: Problem Solving: Input your final answer on the space provide.Note: Use three decimal places and no need to input the unit.In Figure the 20°C water and gasoline are open to the atmosphere and are at the same elevation. What is the height h in the th

This problem is the application of the pascal's law, which states that the the pressure at a point…

Engineering

Mechanical Engineering

lote: Use three decimal places and no need to input the unit. Figure the 20°C water and gasoline are open to the atmosphere and are at the same elevation. What is the height h in the third liquid? gasoline 1.5 m water 1 m Liquid, SG=1.60

lote: Use three decimal places and no need to input the unit. Figure the 20°C water and gasoline are open to the atmosphere and are at the same elevation. What is the height h in the third liquid? gasoline 1.5 m water 1 m Liquid, SG=1.60

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter8: Centroids And Distributed Loads

Section: Chapter Questions

Problem 8.121P: One side of the container has a 03-m square door that is hinged at its top edge. If the container is...

See similar textbooks

Similar questions

The 12-ft wide quarter-circular gate AB is hinged at A. Determine the contact force between the gate and the smooth surface at B due to water pressure acting on the gate. Use =62.4lb/ft3 for water.
Atmospheric pressure at sea level under standard conditions is ______inches of mercury (Hg) or_____ pounds per square inch absolute (psia).
One British thermal unit will raise the temperature of _____ 1b of water _____F.
The test tube opens at 293 K with 15 cm Hg at the bottom, and 7.5 cm of water above the Hg. Calculate the pressure at the bottom of the tube if the atmospheric pressure is 760 mm Hg. Use the density of 13:55 g / cm3 for Hg and 0998 g / cm3 to air.Berikan answers in terms of dyne / cm2,psia, and kN / m2 • (see conversion table). a. … KPa. b. … Dyne / cm2. c. … Psia.
If a scuba diver descends too quickly into the sea, the internal pressure on each eardrum remains at atmospheric pressure, while the external pressure increases due to the increased water depth. At sufficient depths, the difference between the external and internal pressures can rupture an eardrum. Eardrums can rupture when the pressure difference is as little as 35 kPa. What is the depth at which this pressure difference could occur? The density of seawater is 1025 kg/m3. 1)sketch (include everything in the system) 2)solution(step by step)
A closed tank whose bottom is 18 inches in diameter is filled with three liquids: 4 inches of carbon tetrachloride (SG=1.59), 2 inches of water and 12 inches of syrup (SG=1.31). The air chamber in the tank is pressurized at 1296 psf. d. Apply the PANEL EQUATIONS to determine the magnitude, direction and location of the total hydrostatic force acting at the bottom of the tank.
You and Madeline are in an aircraft flying steadily at 4,300m above sea level and you are about to experience your first sky dive with her. You jumped first but Madeline, due to hesitation, jumped after few seconds. Supposed that in an instant, the barometric pressure at your elevation is 85.0 kPa and Madeline is higher from you by 800m. Determine the barometric pressure at Madeline's elevation assuming that pressure and temperature at sea level are 101.3 kPa and 25 deg.C respectively. Use lapse rate = 0.00650 K/m
The test tube opens at 293 K with 13 cm Hg at the bottom, and 5.6 cm water above Hg. Calculate the pressure at the bottom of the tube if the atmospheric pressure is 760 mm Hg. Use a density of 13.55 g / cm3 for Hg and 0.998 g / cm3 for water. Give answers in terms of dyne / cm2, psia, and kN / m2 • (See conversion table). = kPa. = ..... dyne / cm2. = .... psia = ....
1. Convert a temperature of 40oF to a. oC b. K c. oR 2. In a location where the local atmospheric pressure is 100 kPa a. What is the equivalent absolute pressure of 40 kPa Vacuum? b. What is the equivalent absolute pressure of 75 kPa Gage? c. What is the equivalent absolute pressure at the base of a 20cm vertical column of mercury if the density of mercury is 13.6 times more than water? 3. Air is inside a piston-cylinder arrangement initially at a pressure of 1.2 bar, temperature of 77oC and a volume of 0.8 m3. The air is cooled at constant pressure until the volume is halved. Determine the following: a. The mass of air in the cylinder b. The final temperature 4. Water is being heated in a closed pan on top of a range while being stirred by a paddle wheel. During the process, 30 kJ of heat is transferred to the water, and 5 kJ of heat is lost to the surrounding air. The paddle-wheel work amounts to 500 N ∙ m. Determine the final energy of the system if its initial energy is 10 kJ. 5. 5…
A 1m x 2m inclined plate is submerged as shown. The normal force acting on the upper surface of the plate due to the water (when taking atmospheric pressure into account) is most nearly (A) 68kN (B) 91kN (C) 203kN (D) 294kN Answer is 294kN please write the complete solution in Handwritten format with FBD
Please solve and show your solution on a paper with units in every proceedure. Determine the vertical pressure in kgf/cm2 due to a column of water 70 m high.
The surface tension of a liquid is being measured with a ring as shown in the figure. Thering has an outside diameter of 10 cm and an inside diameter of 9.5 cm. The mass of thering is 10 g. The forcerequired to pull the ring from the liquid is the weight corresponding to a mass of 16 g.What is the surface tension of the liquid (in N/m)?