P5-23g Walter White, Jesse Pinkman, and Mike Ehrmantraut stole 1000 gallons of methylamine during an episode of the TV series Breaking Bad. Shortly thereafter, Jesse and Mike decided they would get out of the cooking business and sell their shares of the methylamine. Walter wanted to keep all of the methylamine for future meth cooks and not let Jesse and Mike have their shares. Suppose Jesse and Mike decided to sabotage Walter's cooking operation by ruining the methylamine using the following gas phase reaction: 2 CH;NH2 + (CH3)½NH + NH3 or, in short: 2A 2B+C This reaction converts the methylamine to dimethylamine, using a silica-alumina catalyst. The molar flow rate into a packed-bed reactor is 23.6 mol/s and the entering pressure is 18 atm. Assume there is no pressure drop or temperature change in the reactor. The reaction rate follows an elementary rate law in terms of partial pressure. mol atm' gratalyst and K, = 2.5 -6 k = 4.25 x 10 (a) Write the mole balance. (b) Write the rate law in terms of partial pressures. (c) Set up a stoichiometric table for this reaction. (d) Write the partial pressures in terms of conversion. (e) Write the rate law solely in terms of conversion. () What is the equilibrium conversion, X? (g) Write out your algorithm in terms of conversion. (h) How many kilograms of catalyst would Jesse need to load in a PBR to obtain a conversion of 0.9*X,? For X = 0.75 X,? (i) How many kilograms of catalyst would be needed to obtain 90% of the equilibrium conversion in a fluidized-bed reactor? If this weight is very, very large, what might you suggest to reduce the weight? (Ans.: Ww = 207.2 kg catalyst) () What conversion would be achieved in a 100 kg PBR with pressure drop and == 0.0098 kg-1? At what catalyst weight does the exit pressure fall below 1.0 atm? (k) Repeat (j) when pressure drop is accounted for with a = 6 x 104 kg-1. Ph.D. student Julia Faeth created this problem using modified data from J. W. Mitchell, et al., Ind. Eng. Chem. Res. 33, 1994, pp. 181–184.

Introduction to Chemical Engineering Thermodynamics
8th Edition
ISBN:9781259696527
Author:J.M. Smith Termodinamica en ingenieria quimica, Hendrick C Van Ness, Michael Abbott, Mark Swihart
Publisher:J.M. Smith Termodinamica en ingenieria quimica, Hendrick C Van Ness, Michael Abbott, Mark Swihart
Chapter1: Introduction
Section: Chapter Questions
Problem 1.1P
icon
Related questions
Question

Solve e, f and g

 

P5-23g Walter White, Jesse Pinkman, and Mike Ehrmantraut stole 1000 gallons of methylamine during an episode of the TV series Breaking Bad. Shortly thereafter, Jesse and Mike decided they would get
out of the cooking business and sell their shares of the methylamine. Walter wanted to keep all of the methylamine for future meth cooks and not let Jesse and Mike have their shares. Suppose Jesse
and Mike decided to sabotage Walter's cooking operation by ruining the methylamine using the following gas phase reaction:
2 CH3NH2 → (CH3)½NH + NH3
or, in short:
2A 2B+C
This reaction converts the methylamine to dimethylamine, using a silica-alumina catalyst. The molar flow rate into a packed-bed reactor is 23.6 mol/s and the entering pressure is 18 atm. Assume
there is no pressure drop or temperature change in the reactor. The reaction rate follows an elementary rate law in terms of partial pressure.
ki = 4.25 x 10-6.
mol and K, = 2.5
atm geatalyst-s
(a) Write the mole balance.
(b) Write the rate law in terms of partial pressures.
(c) Set up a stoichiometric table for this reaction.
(d) Write the partial pressures in terms of conversion.
(e) Write the rate law solely in terms of conversion.
() What is the equilibrium conversion, X?
(g) Write out your algorithm in terms of conversion.
(h) How many kilograms of catalyst would Jesse need to load in a PBR to obtain a conversion of 0.9*X,? For X = 0.75 X,?
(i) How many kilograms of catalyst would be needed to obtain 90% of the equilibrium conversion in a fluidized-bed reactor? If this weight is very, very large, what might you suggest to reduce the
weight? (Ans.: W = 207.2 kg catalyst)
() What conversion would be achieved in a 100 kg PBR with pressure drop and ==0.0098 kg-1? At what catalyst weight does the exit pressure fall below 1.0 atm?
(k) Repeat (j) when pressure drop is accounted for with a = 6 x 10 kg-1. Ph.D. student Julia Faeth created this problem using modified data from J. W. Mitchell, et al., Ind. Eng. Chem. Res. 33,
1994, pp. 181–184.
Transcribed Image Text:P5-23g Walter White, Jesse Pinkman, and Mike Ehrmantraut stole 1000 gallons of methylamine during an episode of the TV series Breaking Bad. Shortly thereafter, Jesse and Mike decided they would get out of the cooking business and sell their shares of the methylamine. Walter wanted to keep all of the methylamine for future meth cooks and not let Jesse and Mike have their shares. Suppose Jesse and Mike decided to sabotage Walter's cooking operation by ruining the methylamine using the following gas phase reaction: 2 CH3NH2 → (CH3)½NH + NH3 or, in short: 2A 2B+C This reaction converts the methylamine to dimethylamine, using a silica-alumina catalyst. The molar flow rate into a packed-bed reactor is 23.6 mol/s and the entering pressure is 18 atm. Assume there is no pressure drop or temperature change in the reactor. The reaction rate follows an elementary rate law in terms of partial pressure. ki = 4.25 x 10-6. mol and K, = 2.5 atm geatalyst-s (a) Write the mole balance. (b) Write the rate law in terms of partial pressures. (c) Set up a stoichiometric table for this reaction. (d) Write the partial pressures in terms of conversion. (e) Write the rate law solely in terms of conversion. () What is the equilibrium conversion, X? (g) Write out your algorithm in terms of conversion. (h) How many kilograms of catalyst would Jesse need to load in a PBR to obtain a conversion of 0.9*X,? For X = 0.75 X,? (i) How many kilograms of catalyst would be needed to obtain 90% of the equilibrium conversion in a fluidized-bed reactor? If this weight is very, very large, what might you suggest to reduce the weight? (Ans.: W = 207.2 kg catalyst) () What conversion would be achieved in a 100 kg PBR with pressure drop and ==0.0098 kg-1? At what catalyst weight does the exit pressure fall below 1.0 atm? (k) Repeat (j) when pressure drop is accounted for with a = 6 x 10 kg-1. Ph.D. student Julia Faeth created this problem using modified data from J. W. Mitchell, et al., Ind. Eng. Chem. Res. 33, 1994, pp. 181–184.
Expert Solution
trending now

Trending now

This is a popular solution!

steps

Step by step

Solved in 5 steps

Blurred answer
Knowledge Booster
Profit and Optimization
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, chemical-engineering and related others by exploring similar questions and additional content below.
Recommended textbooks for you
Introduction to Chemical Engineering Thermodynami…
Introduction to Chemical Engineering Thermodynami…
Chemical Engineering
ISBN:
9781259696527
Author:
J.M. Smith Termodinamica en ingenieria quimica, Hendrick C Van Ness, Michael Abbott, Mark Swihart
Publisher:
McGraw-Hill Education
Elementary Principles of Chemical Processes, Bind…
Elementary Principles of Chemical Processes, Bind…
Chemical Engineering
ISBN:
9781118431221
Author:
Richard M. Felder, Ronald W. Rousseau, Lisa G. Bullard
Publisher:
WILEY
Elements of Chemical Reaction Engineering (5th Ed…
Elements of Chemical Reaction Engineering (5th Ed…
Chemical Engineering
ISBN:
9780133887518
Author:
H. Scott Fogler
Publisher:
Prentice Hall
Process Dynamics and Control, 4e
Process Dynamics and Control, 4e
Chemical Engineering
ISBN:
9781119285915
Author:
Seborg
Publisher:
WILEY
Industrial Plastics: Theory and Applications
Industrial Plastics: Theory and Applications
Chemical Engineering
ISBN:
9781285061238
Author:
Lokensgard, Erik
Publisher:
Delmar Cengage Learning
Unit Operations of Chemical Engineering
Unit Operations of Chemical Engineering
Chemical Engineering
ISBN:
9780072848236
Author:
Warren McCabe, Julian C. Smith, Peter Harriott
Publisher:
McGraw-Hill Companies, The