Part #2 Effective Stress (kPa) Void Ratio (%) The following are the results of laboratory consolidation test conducted on clayey soil sample. Determine, graphically, the compression and recompression indices, Cc, C, of this soil. Using Casagrande's method, determine graphically the preconsolidation pressure. 0.891 54 0.866 107 0.841 214 0.802 429 0.737 858 0.653 1716 0.560 3432 0.467

Part #2 Effective Stress (kPa) Void Ratio (%) The following are the results of laboratory consolidation test conducted on clayey soil sample. Determine, graphically, the compression and recompression indices, Cc, C, of this soil. Using Casagrande's method, determine graphically the preconsolidation pressure. 0.891 54 0.866 107 0.841 214 0.802 429 0.737 858 0.653 1716 0.560 3432 0.467

Principles of Geotechnical Engineering (MindTap Course List)

9th Edition

ISBN:9781305970939

Author:Braja M. Das, Khaled Sobhan

Publisher:Braja M. Das, Khaled Sobhan

Chapter11: Compressibility Of Soil

Section: Chapter Questions

Problem 11.4P

See similar textbooks

Similar questions

Subject: Soil Mechanics Please provide a solution and diagram An undisturbed soil sample, 100 mm in diameter and 200 mm high, was tested in a triaxial machine. The sample failed at an additional axial load of 3 kN with a vertical deformation of 20 mm. The failure plane was inclined at 50° to the horizontal and the cell pressure was 300 kN/m2, Determine, from Mohr’s circle, the cohesion in kPa. a. 125.6 b. 117.8 c. 91.3 d. 87.2
A dilatometer test was conducted in a clay deposit. The groundwater table was locatedat a depth of 3 m below the surface. At a depth of 8 m below the surface, the contact pressure spod was 280 kN/m2 and the expansion stress sp1d was 350 kN/m2. Determinethe following:a. Coefficient of at-rest earth pressure, Kob. Overconsolidation ratio, OCRc. Modulus of elasticity, EsAssume s 9o at a depth of 8 m to be 95 kN/m2 and ms 5 0.35.
In a drained triaxial test on consolidated clay the stress and angle are as follows: Deviator stress is 20 1b/in2 and friction angle is 210 . Calculate the effective confining pressure at failure.? A) 21 1b/in2 B) 22.2 1b/in2 C) 25.4 1b/in2 D) 17.9 1b/in2
In a drained triaxial test on consolidated clay the stress and angle are as follows: Deviator stress is 20 1b/in2 and friction angle is 210 . Calculate the effective confining pressure at failure.? A) 21 1b/in2 B) 22.2 1b/in2 C) 25.4 1b/in2 D) 17.9 1b/in2 make it fast
24.A series of consolidated, undrained triaxial tests were carried out on specimens of asaturated clay under no backpressure. The test data at failure are summarized:Confiningpressure (kPa) Deviator stress(kPa) Pore waterpressure (kPa) 150 192 80300 341 154450 504 222 a. Draw the Mohr circles and find the cohesion and friction angles in terms of effectivestresses.b. Compute Skempton’s A- parameter at failure for all three specimens.c. Is the soil normally consolidated or over consolidated? Why?d. Another specimen of the same day that was consolidated under a cell pressure of 250 kPa wassubjected to a consolidated, drained tri axial test. What would be the deviator stress at failure?
A specimen of saturated sand was consolidated under an all-around pressure of 105kN/m2.The axial stress was then increased and drainage was prevented.The specimen failed when the axial deviator stress reached 70 KN/m2.The pore water pressure at failure was 50 KN/m2.Determine:i. Consolidated-undrained angle of shearing resistance, ɸii. Drained friction angle, ɸ′iii. Sketch Mohr’s circles and Failure Envelops in terms of total and effective stress.iv. Assuming soil specimen to be homogenous, sketch a network of failure planes.
Give the correct option In a drained triaxial test on consolidated clay the stress and angle are as follows: Deviator stress is 20 lb/in2 and friction angle is 21°. Calculate the effective confining pressure at failure?a) 21 lb/in2 b) 22.2 lb/in2 c) 25.4 lb/in 2 d) 17.9 lb/in2
A consolidated drained tri-axial test was conducted on normally consolidated clay. The results were: the confining pressure is 300 kPa and the deviators stress is 300 kPa. Compute the angle that the failure plane makes with the major principal axis in degrees. show free body diagram. a.54.74 b.16.3 c.24.72 d.19.47
There is an upward flow of 0.06 ml/s through a sand sample with a coefficient of permeability 3 × 10^–2 mm/s. The thickness of the sample is 150 mm and the cross-sectional area is 4500 mm2.Determine the effective stress in N/m2 at the middle of the sample, if the saturated unit weight of the sample, is 18.9 kN/m3. a. 177.38 b. 354.75 c. 88.69 d. 709.5
Three samples of loose sand were tested under consolidated undrained (CU) conditions. The failure stresses and excess pore water pressure for the soil sample is given below: Cell Pressure = 243 kPa Deviator Stress = 127 kPa Pore Water Pressure = 82 kPa Determine the drained angle of inclination of failure plane in degrees. Round off to two decimal places. Answer: 53.22
Question 9 Three samples of loose sand were tested under consolidated undrained (CU) conditions. The failure stresses and excess pore water pressure for the soil sample is given below: Cell Pressure = 201 kPa Deviator Stress = 127 kPa Pore Water Pressure = 95 kPa Determine the drained angle of inclination of failure plane in degrees. Round off to two decimal places.
Water flows at the rate of 0.09 ml/s in an upward direction through a sand sample with a coefficient of permeability of 2.7 × 10^–2 mm/s. The thickness of the sample is 120 mm and the area of cross-section is 5400 mm2. Taking the saturated unit weight of the sand as 18.9 kN/m3, determine the effective pressure in Pa at the bottom of the sample. a. 364 b. 728 c. 182 d. 910