Practice assignment No. 12 1. Problem No. 1: A 3-m pole is supported by a ball-and-socket joint at A and by the cables CD and CE. a) Draw the free body diagram of the pole. How many unknowns are there? How many equations of equilibrium do you have? Is the problem statically determinate? b) Is the pole stable under current loading? Can you provide an example of a loading that could make the pole unstable? c) Under current loading, determine the tension in cables CD and CE and the reaction at A. 1.5 m 1.2 m D 2 m E 5 kN B Im

Practice assignment No. 12 1. Problem No. 1: A 3-m pole is supported by a ball-and-socket joint at A and by the cables CD and CE. a) Draw the free body diagram of the pole. How many unknowns are there? How many equations of equilibrium do you have? Is the problem statically determinate? b) Is the pole stable under current loading? Can you provide an example of a loading that could make the pole unstable? c) Under current loading, determine the tension in cables CD and CE and the reaction at A. 1.5 m 1.2 m D 2 m E 5 kN B Im

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Determine the reactions and moments using the slope-deflection method. reference solution: https://www.bartleby.com/solution-answer/chapter-15-problem-11p-structural-analysis-6th-edition/9781337630931/bb8a9823-94ca-11e9-8385-02ee952b546e
If R is not zero, there should be some acceleration in the system. The knot connecting the three cords must be moving, but somehow not. Which of the following explains why the knot is at rest even if the R is not zero?I. There is a small difference between the measured angle and the actual angle between the cords that will make the system to be at rest.II. The calculations did not include the effects of friction in the pulleys, that is why R is not equal to zero.III. The varying atmospheric pressure inside the lab changes the result. IV. The use of scaling (1 cm - 1 weight) did not capture the entire first condition since the units are not in Newtons. a. I and II b. I, II, and IV c. II and III d. III and IV
Please answer this NEATLY, COMPLETELY, and CORRECTLY for an UPVOTE. A 1.25 kg pendulum bob suspended from a 0.5-m cable, is released from rest at an angle θ as shown. It then creates a head-on collision with a 0.625-kg stationary basketball that bounces off with a speed of vB’ = 1.553 m/s. If the coefficient of restitution between the bob and the ball is 0.75, determine: (a) the angle to where the bob is released.(b) the average impulsive force (N) exerted by the bob on the ball if the collision occurred in 0.001 s.
Compute support reaction
The roof is supported by cables as shown in the photo. If the cablesexert forces FAB = 100 N and FAC = 120 N on the wall hook at A asshown , determine the resultant force acting at A. Expressthe result as a Cartesian vector.
13.5 A 20lb collar C is moved from rest from the position A to the position B by cable CDE which passes around a pulley at D and is pulled downward by the constant force of 50lb at F as shown. Neglecting the effects of friction, determine the speed of the collar as it passes through B.
W1 = 10 kN/m P2 = 60 kN a = 2 c = 5 M1 = 35 kNm
A line was recorded as 1750.00 meters long. The standard tape weighs0.65 kg , 30.00m long at 20°C under a 50N pull. During the actualobservation the temperature was 5°C and the tape was suspended undera 75N pull. It was also found that the tape is 3.00mm too long. If the linewas inclined at 3%. E = 200GPa, A = 2.50mm² and the coefficient of linearexpansion is 0.0000116 m/°C.(a) What is the actual inclined distance?(b) What is the actual horizontal distance.