A rectangular beam has a width of 400 mm, and effective depth d=700 mm to centroid of tension steel bars. Tension steel reinforcement consist of 4436mm in two rows, compression reinforcement of 2022mm. Calculate the design moment strength of the beam, where f'c-21 Mpa, fy=420 Mpa, d'=65mm. (Mu-927 kN.m Ans)

A rectangular beam has a width of 400 mm, and effective depth d=700 mm to centroid of tension steel bars. Tension steel reinforcement consist of 4436mm in two rows, compression reinforcement of 2022mm. Calculate the design moment strength of the beam, where f'c-21 Mpa, fy=420 Mpa, d'=65mm. (Mu-927 kN.m Ans)

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A doubly reinforced beam, which have a base of 310 mm, and an effective depth of 410 mm, is reinforced with steel area of 2263 sq. mm at the bottom, and 1232 sq. mm on the top. Take d' = 70 mm, fc' = 21 MPa, and fy = 345 MPa. determine 1.) a 2.) the value of fs' (actual stress of the compression bars) 3.) value of ρbalance 4.) Mu
A doubly reinforced beam, which have a base of 310 mm, and an effective depth of 410 mm, is reinforced with steel area of 2263 sq. mm at the bottom, and 1232 sq. mm on the top. Take d' = 70 mm, fc' = 21 MPa, and fy = 345 MPa. b) What is the value of fs' (actual stress of the compression bars)
Calculate the stresses in members AB, DF, and BD. Given:FAB = 51.22 kN (C)FDF = 50 kN (C)FBD = 32.98 kN (C)d = 0.05 m
A cantilever beam with length of 3.2 m is reinforced with As=5720 mm^2 tension reinforcement and compression reinforcement A's =1905 mm^2 placed at 60 mm from extreme compression fiber. The effective depth is 550 mm and width of 400 mm. Use f'c=35 MPa and fy=415 MPa. 1. Calculate the magnitude of the neutral axis. 2. Determine the compressive force of the section. 3. Determine the safe concentrated live load that can be placed at the free end if the beam carries a total ultimate uniform load of 35 kN/m.
Design a rectangular beam to carry a factored moment Mu=272 kN-m. The beam width is 250mm and its effective depth is 450mm. Use f'c=20.7 MPa and fy=344 MPa. d'=60mm.(Determine the required number of 25mm bars in tension reinforcement and in compression reinforcement (if needed).
A rectangular beam has a width of 300mm and an effective depth of 537.50 mm to the centroid of tension steel bars. Tension reinforcement consists of 6 – 28mm dia in two rows, compression reinforcement consists of 2 – 22mm dia, fc’ = 27.6MPa, fy = 414.7MPa, d’ = 60mm, L = 4m, the Unit weight of concrete is 24.56kN/cu.m 1. Determine the depth of concrete stress block 2. Determine the ultimate moment capacity of the beam
A rectangular beam has a width of 300mm and an effective depth of 537.50 mm to the centroid of tension steel bars. Tension reinforcement consists of 6 – 28mm dia in two rows, compression reinforcement consists of 2 – 22mm dia, fc’ = 27.6MPa, fy = 414.7MPa, d’ = 60mm, L = 4m, the Unit weight of concrete is 24.56kN/cu.m The ultimate moment capacity of the beam is _____kN.m.
Compute for the force in members FH, GH, and GI (USE METHOD OF SECTIONS) *For load P, take the last digit of your ID number example: ID # : 2187525, then P= 5 kN IF ZERO IS THE LAST DIGIT, TAKE THE 2ND TO THE LAST DIGIT example: ID #: 2187520, then P= 2 kN
A rectangular beam has b=300mm, d=500mm, As=4D22mm, fc’=34.2MPa and fy=420MPa. Determine the design moment, kN-m. Determine the balanced distance of the neutral axis to the outermost compression fiber, mm.
A rectangular beam 250 mm wide, 500 mm deep is reinforced at the bottom with a 4-20mm diamter bars and at the top with 2-16 mm bars. Concrete cover to bar centroid at the top is 80 mm and at the bottom is 70 mm. Use concrete strength f'c = 32.09 MPa and steel yield strength fy=345 MPa for 20mm bars and fy=275 MPa for 16mm bars. Determine the maximum steel area for a tension-conctrolled singly reinforced condition in positive bending with the given material strength.
A beam cast monolithically with the slab thickness of 110 has a span of 4 m spaced at 6 m center to center. The width of the web is 300 mm and effective depth of 500 mm. It is reinforced on the tension side with 8-20 mm Φ rebars. Fc’ = 30 MPa fy = 310 MPa 1. Which gives the effective width of flange? a. 2000 mm b. 1500 mm c. 2500 mm d. 1000 mm 2. Which gives the depth of the compression stress block? a. 30.55 mm b. 32.56 mm c. 12.45 mm d. 42.14 mm
Determine the Pn of the following column assuming it had no moment on it and only an axial compression force: (f’c = 6000 psi, Grade 60 bars, h = 20”, b = 12” (i.e. rectangular section), tied column). Do not worry about calculating φ (phi factor). You can assume it is a short column. Also assume a reinforcement ration of 2% (ρg = 0.02).