Problem 1 1.Four masses m1, m2, m3 and m4 are 200 kg, 300 kg, 240 kg and 260 kg respectively. The corresponding radii of rotation are 0.2 m, 0.15 m, 0.25 m and 0.3 m respectively and the angles between successive masses are 45°, 75° and 135°. Find the position and magnitude of the balance mass required, if its radius of rotation is 0.2 m.

Problem 1 1.Four masses m1, m2, m3 and m4 are 200 kg, 300 kg, 240 kg and 260 kg respectively. The corresponding radii of rotation are 0.2 m, 0.15 m, 0.25 m and 0.3 m respectively and the angles between successive masses are 45°, 75° and 135°. Find the position and magnitude of the balance mass required, if its radius of rotation is 0.2 m.

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter7: Dry Friction

Section: Chapter Questions

Problem 7.48P: Find the smallest distance d for which the hook will remain at rest when acted on by the force P....

See similar textbooks

Similar questions

Three 25-lb rotor disks are attached to a shaft that rotates at 720 rpm. Disk A is attached eccentrically so that its mass center is in. from the axis of rotation, while disks B and C are attached so that their mass centers coincide with the axis of rotation. Where should 2-lb weights be bolted to disks B and C to balance the system dynamically?
SITUATION 1. The quarter circular plate is subjected to forces as shown. If the plate weighs 50 kg, and assuming equilibrium
A, B, C and D are four masses carried by a rotating shaft at radii 100mm, 150mm, 150mm and 200mmrespectively. The planes in which the masses rotate are spaced at 500mm apart and the magnitude ofthe masses B, C and D are 9kg, 5kg and 4kg respectively. Find the required mass A and the relativeangular settings of the four masses so that the shaft shall be in complete balance.
Part A: Determine the horizontal component of the reaction that the pin at A exerts on the frame. The cylinder has a mass of 30 kg. Part B: Determine the vertical component of the reaction that the pin at A exerts on the frame. Part C: Determine the horizontal component of reaction that the pin at B exerts on the frame. Part D: Determine the vertical component of reaction that the pin at B exerts on the frame. Part E: Determine the horizontal component of reaction that the pin at C exerts on the member ACD. Part F: Determine the vertical component of the reaction that the pin at C exerts on the member ACD.
a porter governor has two balls each of mass 3 Kg and a central load of mass 15 Kg. The arms are all 200 mm long, pivoted on the axis. If the maximum and minimum radii of rotation of the balls are 160 mm and 120 mm respectively find the range of speed
An object in the shape of a thin ring has radius a and mass M. A uniform sphere with mass m and radius R is placed with its center at a distance x to the right of the center of the ring, along a line through the center of the ring, and perpendicular to its plane . What is the gravitational force that the sphere exerts on the ring-shaped object? Show that your result reduces to the expected result when x is much larger than a.
A freight wagon is at rest on a track at an angle of 25o to the vertical. The gross weight of the wagon and its load is 36kN and acts at a point 750 mm from the track, in the middle between the two axles. The wagon is held by a cable 600 mm from the track. Determine the traction on the cable and the reaction on each pair of wheels.
A physics student of mass 43.0 kg is standing at the edge of theflat roof of a building, 12.0 m above the sidewalk. An unfriendly dog isrunning across the roof toward her. Next to her is a large wheel mountedon a horizontal axle at its center. The wheel, used to lift objects from theground to the roof, has a light crank attached to it and a light rope wrappedaround it; the free end of the rope hangs over the edge of the roof. Thestudent grabs the end of the rope and steps off the roof. If the wheel hasradius 0.300 m and a moment of inertia of 9.60 kg . m2 for rotation aboutthe axle, how long does it take her to reach the sidewalk, and how fast willshe be moving just before she lands? Ignore friction in the axle.
Engineering Mechanics (Equilibrium): A loading car is at rest on a track forming an angle of 25° with the vertical the gross weight of the car and its load is 5500 lb, and it acts at a point 30 inches from the track. Halfway between the two axles. The car is held by a cable 24 inches from the track. Determine the tension in the cable and the reaction at each pair of wheels.
The mechanism shown is a special platform used to raise sections of a structure for the construction of a tower. Assembly A has a mass of 3000 kg and is lifted by platform B which has a mass of 2000 kg. The platform moves upwards guided by the vertical column by means of rollers, as the movement is activated by the hydraulic piston CD and the parts EDF and FH. For the position shown, determine the magnitude of the minimum force that must be exerted by the hydraulic piston to start the lifting motion. (Considerable value will be placed on the correct completion of free-body diagrams. Use as much space as you feel necessary to keep the D.C.L.s clear and complete.)
The angle of the slope 23.0∘ and use a different cart and a different bucket. You observe that the cart and bucket remain at rest when released and that the tension in the cable of negligible mass is 175 N. There is no friction. What is the weight of the cart? What is the combined weight of the cart and bucket?
A shaft carries four masses A, B, C and D of magnitude 10 kg, 20 kg, 15 kg and 25 kg respectively and revolving at radii 100 mm, 50 mm, 80 mm and 120mm in planes measured from A at 100 mm, 300 mm and 500 mm. The angles between the cranks measured anticlockwise are A to B = 40°, B to C = 50° and C to D = 150°. The balancing masses are to be placed in planes X and Y. The distance between the planes A and X is 50 mm, between X and Y is 350 mm. If the balancing masses revolve at a radius of 50 mm, find the magnitude for mass on plane X (consider plane X as the refernce plane).