Problem 2-15. A continuous horizontal beam ABC of uniform section is fixed at A and simply supported at B and C. The span AB is 5 m long and has a central load of 60 kN. The span BC is 4 m long and is loaded with uniformly distributed load of 40 kN/m. Draw the B.M. and S.F. diagrams. 40kN/m 60 kN 2.5m Dr A B C zero 5m 4m span 80KN.m 75 59.43 26.53 ВMD 94.86 23.42

Problem 2-15. A continuous horizontal beam ABC of uniform section is fixed at A and simply supported at B and C. The span AB is 5 m long and has a central load of 60 kN. The span BC is 4 m long and is loaded with uniformly distributed load of 40 kN/m. Draw the B.M. and S.F. diagrams. 40kN/m 60 kN 2.5m Dr A B C zero 5m 4m span 80KN.m 75 59.43 26.53 ВMD 94.86 23.42

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

reply plss An overhang beam carries a concentrated load, P and a uniform load, w = 15 kN/m. If the point of contra-flexure (where bending moment is zero) is located 0.5 m from support B, determine the absolute value of P (in kN).
A horizontal beam AB is freely supported at A and B, 8metres apart and carries uniformly distributed load of 15KN/m run (including its own weight). A clockwise moment of 160KN-M is applied at a point C, 3metres from left hand support A.using Macaulay method, calcite the beam at C if El=40×10^3KN-m^3
Given: S1=S2=S3= 2.8 m L1=L2=L3= 6.0 m b = 300 mm h = 400 mm t = 100 mm column = 0.3 m x 0.3 m total ultimate load = 12 kN/m f'c = 20.7 MPa fy = 275 MPa Calculate the positive moment (kN-m) at the interior span bounded by FGKJ.
QUESTION1) Figure Q1(a) show a simply supported beam of length L = 4.8m is and built for placing Machine and Magnum frame. The combined weight of the machine is approximated by uniform load 90kN/m along x3 = 2.4 m. For of the design, its assumed that the column framed located at a distance x1 and x2 = 0.8m and resulting concentrated load P1 and P2 exerted oneach beam is taken as 150kN and 150kN, respectively. The cross section of beam show as in Figure Q1(b). (a) Determine the bending stress at point a and the maximum bending stress of the beam (b) By referring Figure Q1(a) and consider section n-n, determine the maximum shear stress and the shear stress at point a.
A steel framework is used to support the 4" reinforced concrete slab that carries a uniform live loading of 1.9kPa. Sketch the loading that acts along members BE and FED. b = 3 m and a = 2.5 m.
A Universal beam of I shaped cross-section is 203 mm deep, and 133 mm wide and has a steel plate 150 mm by 10 mm thick fastened to each flange. Ix-x for the universal beam is 28.80×10^6 mm^4. a) Determine the total uniformity distributed load which may be carried over a simply supported span of 6 metres if the permissible bending stress is 165 N/mm^2. Neglect the self-weight of the beam. [Ans.: 124.02 KN/m] b) Determine the minimum central length over which the additional plates are required. [Ans.: 4.23m]
An overhanging beam ABC has a guidedsupport at A, a rectangular cross section, and supportsan upward uniform load q =P/L over AB anda downward concentrated load P at the free end C(see figure). The span length from A to B is L, and thelength of the overhang is L/2. The cross section has awidth of b and a height h. Point D is located midwaybetween the supports at a distance d from the topface of the beam.Knowing that the maximum tensile stress (principalstress) at point D is σ1 = 38 MPa, determine the magnitudeof the load P. Data for the beam are L=1.75 m,b = 50 mm, h = 220 mm, and d = 55 mm.
Calculate and draw the internal forces created at H section of the bracket beam? a = 500 mm b= 200 mm Px= 15 Kn Py=0 Kn Pz = 10 Kn
Compute the value of EI ϴ at the right end support. Wo = 19 kN/m, P =5 kN, L1 = 1.2m, L2 = 2.1m, L3 = 2.4m
Q2 Draw the S.F. and B.M. diagrams for the overhanging beam carrying uniformly distributed load of 30kN/m over the entire length and a point load of (41kN) as shown in the figure. Locate the point of contra flexure. ((IN THE PICTURE OF Q.2 WHEN HE SAYS YOUR ROLL NUMBER HE MEAN 41))
Is there possible solve support forces like this way of Ma :Ma= (10*2)-(19.5*6)+(3*4)*(7+4/2)-(3*11) Ma = -22KN-m
Determine the reactions at a and b for the beam subjected to the concentrated loads Ay= ? (Not 8.77 or 4.85 previous failed attempts on my behalf) bx = 7.2 Ax = ? (Not 1.9 or -.3365)