Problem-4 A balanced wye-connected load contains a 10 f resistor in series with 20 mH inductor in each phase. The voltage source is an abc-sequence three-phase 60 Hz balanced-wye with voltage Van = 480230 Vrms. Determine all the phase currents. Determine the instantaneous power supplied by the source.

Problem-4 A balanced wye-connected load contains a 10 f resistor in series with 20 mH inductor in each phase. The voltage source is an abc-sequence three-phase 60 Hz balanced-wye with voltage Van = 480230 Vrms. Determine all the phase currents. Determine the instantaneous power supplied by the source.

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.45P: Two balanced Y-connected loads, one drawing 10 kW at 0.8 power factor lagging and the other IS kW at...

See similar textbooks

Similar questions

Consider a three-phase Y-connected source feeding a balanced- load. The phasor sum of the line currents as well as the neutral current are always zero. (a) True (b) False
A balanced three-phase 240-V source supplies a balanced three-phase Load. If the line current IA is measured to be 15 A and is in phase with the line-to-line voltage, VBC, find the per-phase load impedance if the load is (a) Y-connected, (b) -conneeted.
A balanced -connected impedance load with (12+j9) per phase is supplied by a balanced three-phase 60-Hz,208-V source, (a) Calculate the line current, the total real and reactive power absorbed by the load, the load power factor, and the apparent load power, (b) Sketch a phasor diagram showing the line currents, the line-to-line source voltages, and the -load currents. Use Vab as the reference.
Figure 2.33 gives the general -Y transformation. (a) Show that the general transformation reduces to that given in Figure 2.16 for a balanced three-phase load. (b) Determine the impedances of the equivalent Y for the following impedances: ZAB=j10,ZBC=j20, and ZCA=j25. ZAB=ZAZB+ZBAC+ZCZAZCZA=ZABZCAZAB+ZBC+ZCAZBC=ZAZB+ZBAC+ZCZAZAZB=ZABZBCZAB+ZBC+ZCAZCA=ZAZB+ZBAC+ZCZAZBZA=ZCAZBCZAB+ZBC+ZCA
A 3-phase 4160 V Y-connected source is rated at 5 MVA. It is connected to a balanced 3-phase delta connected load with 300 A phase current at 0.8 p.f. Determine the impedance of the load, and the source line current and power factor seen by the source. What impedance can be added to the system to make the power factor = 1?
Convert the wye-connected load to its delta equivalent. What is the per phase impedance of the delta equivalent load? What is the total real and total reactive power consumed by the three-phase load regardless if wye or delta?
In a three-phase, three-wire circuit, find the phasor line currents to a balanced Y load in which each phase impedance is ?? = 20 ∠ 300, ??? = 120 ∠ 200 and the phase sequence is ABC.
A balanced wye-connected load of (3 + j4) Ω per phase and a balanced delta connected load of (9 + j12) Ω per phase are connected in parallel across a 220-V, 3-phase source. Find the magnitude of the line current.
A balanced 3-phase delta load is going to be connected across a 230 V, balanced 3-phase source. In connecting this load to the source, three-line conductors with impedances of 1 + j1 ohms each are used. If the impedance per phase of the delta load is 30 + j40 ohms each, its phase voltage across the load, Vbc is?
A balanced load of phase impedance 100Ω and power factor 0.8 is connected to a400 V, 3-phase supply (a) in star, and (b) in delta. Calculate and compare the powerdissipation in each case.
Provide examples of balanced 3-phase systems, including one sample problem for a Wye-connected source and one sample problem for a Delta-connected source. Provide solutions for each problem.
Using two wattmeter method, w2 is connected in line a while w1 is conencted in line c. This is a balanced three-phase inductive load connected in delta and to a 100V abc source. If w2 reads 900W and pf = 0.8, find a. line currents b. reading of w1 c. show the power triangle illustration of the load