Problem: A project you are a part of would have to pour a slab on grade (SOG) with an area of 1.5m x 2.4m with slab thickness 150mm. The required strength is 3000 psi at 28 days with a concrete Mix Ratio of 1:1.5:3. a. Compute the required measurement for cement, aggrergates, sand and water. Calculate for the water cement ratio With this activity, it is suitable to conduct field test for the quality of the materials. b. Write the procedure of conducting the suitable test of the workability of the fresh concrete. Include apparatus. To test for the required strength of the concrete, a sample is required. c. How would you make the samples and what is the curing procedure? Include apparatus or equipment. Please show your solution and fill up the table and you may include pictures for the procedures. DESIGN MIX WATER-CEMENT SLUMP SLUMP TYPE & REMARKS RATIO READING Cement Aggregates Sand Water

Problem: A project you are a part of would have to pour a slab on grade (SOG) with an area of 1.5m x 2.4m with slab thickness 150mm. The required strength is 3000 psi at 28 days with a concrete Mix Ratio of 1:1.5:3. a. Compute the required measurement for cement, aggrergates, sand and water. Calculate for the water cement ratio With this activity, it is suitable to conduct field test for the quality of the materials. b. Write the procedure of conducting the suitable test of the workability of the fresh concrete. Include apparatus. To test for the required strength of the concrete, a sample is required. c. How would you make the samples and what is the curing procedure? Include apparatus or equipment. Please show your solution and fill up the table and you may include pictures for the procedures. DESIGN MIX WATER-CEMENT SLUMP SLUMP TYPE & REMARKS RATIO READING Cement Aggregates Sand Water

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

a. When is it necessary to consolidate concrete by vibration in test method C231? Discuss the process of vibration when placing and consolidating the sample.b. When rodding a layer of concrete in method C138, is it okay to hit the bottom of the measure? If not, how is it supposed to be done?c. Calculate the yield of concrete if the mass of the batch is 4800 kg and its density is found to be 350 kg/m3.
The design of a concrete mix requires 1173 kg/m3of gravel in dry condition,582 kg/m3of sand in dry condition, and 157 kg/m3of free water. The gravelavailable at the job site has a moisture content of 0.8% and absorption of1.5%, and the available sand has a moisture content of 1.1% and absorptionof 1.3%. What are the masses of gravel, sand, and water per cubic meter thatshould be used at the job site?
Assumng class A concrete mix, compute for the following: a. Total number of 40kg cement bags b. Quantity of sand in cu. m c. Quantity of gravel in cu. m.
A batch of concrete consisted of 200 lbs fine aggregate (sand), 400 lbs coarse aggregate(gravel), 95 lbs cement, and 5 gallons of water. The relative density of the sand and gravel may be taken as 0.65 and that the cement as 3.10 What was the total volume ofconcrete produced? FULL solution please thank u
You are working on a concrete mix design that requires each cubic yard ofconcrete to have 0.45 water–cement ratio, 1165 kg/m3of dry gravel, 4% aircontent, and 335 kg/m3of cement. The available gravel has a specific gravity of Ggravel = 2.7, a moisture content of 1.6%, and absorption of 2.4%. The available sand has a specific gravity of Gsand = 2.5, a moisture content of 4.8%, and absorption of 1.5%. For each cubic meter of concrete needed on the job, calculate the mass of cement, moist gravel, moist sand, and water that should be added to the batch. Summarize and total the mix design when finished (don’t include air entrainer in summary).
Design a non-air-entrained concrete mix for a small job with a nominal maxi-mum gravel size of 19 mm. Show the results as follows: a. mass of components to produce 2263 kg of concreteb. volumes of components to produce 1 m3 of concrete
From the following figure find the cement, sand and gravel if there are 8 columns, using class "A" mixture.
Q: a) why do we need workable concrete? b) What is pozzolanic material; what benefits can be achieved by using Pozzolana with cement in concrete? c) For what purpose we use Ultrasonic Pulse velocity test? Also classify the quality of concrete if Ultrasonic Pulse velocity is 3.0km/sec? SIR, PLS GIVE ME PROPER AND CORRECT ANSWER WITH FULL DETAILS. THANKS SUBJECT: CONCRETE TECHNOLOGY
The moisture content of coarse aggregate is 0.60%. If the mass of the aggregate is 1,290 kg, adjust the mass of the aggregate. If the volume of sand is 0.30 cubic meter and its specific gravity is 1.50, what is the mass of the sand? If the mass of mixing water is 175 kg, and the required water-cement ratio is 0.65, how much cement powder is needed in the concrete mix? If the target slump of concrete is 160 mm, the maximum nominal size of the coarse aggregate is 37.5 mm, and the smallest nominal size is 9.5 mm, what is the estimated entrapped air in the ordinary concrete mix? The nominal maximum size of coarse aggregate is 25mm, the fineness modulus of coarse aggregates is 2.80, dry rodded mass of coarse aggregates is 1,100 kg and the fineness modulus of fine aggregates is 2.50. How much coarse aggregates is needed in the concrete mix? If the nominal maximum size of coarse aggregates is 25mm, what is the first estimate of air-entrained concrete?
Find the quantity of 15 cm x 20 cm x 40 cm CHB, 50 kg. cement per bag, sand and gravel required using class "B" mixture by Area Method.
You are working on a concrete mix design that requires each cubic yard ofconcrete to have 0.45 water–cement ratio, 1165 kg/m3 of dry gravel, 4% air content, and 335 kg/m3 of cement. The available gravel has a specific grav-ity of Ggravel = 2.7, a moisture content of 1.6%, and absorption of 2.4%. The available sand has a specific gravity of Gsand = 2.5, a moisture content of4.8%, and absorption of 1.5%. For each cubic meter of concrete needed onthe job, calculate the mass of cement, moist gravel, moist sand, and waterthat should be added to the batch. Summarize and total the mix design whenfinished (don’t include air entrainer in summary).
Design a non-air-entrained concrete mix for a small job with a nominal maximum gravel size of 19 mm. Show the results as follows: a. mass of components to produce 2263 kg of concrete b. volumes of components to produce 1 m3 of concrete