Question 1Provide an analysis for the transformer mentioned below. The followings are the readingfrom the series of test on a transformer.10 kVA -240/415 V 50 Hz 1ø transformer0.95 lagging power factor (Z18.19 °)Poc = 150 WTransformer ratingОреn Circuit Test:Voc = 240 VIoc = 5.00 AShort Circuit Test:P = 185 WV = 100 VIx = 24.10 ADetermine:i)The transformer parameters and draw equivalent circuit referred to low voltage sideii)The appropriate full load voltage potentialiii) The full load efficiency of the transformeriv) The short-circuit based voltage regulation

Note: We are authorized to answer three subparts at a time, since you have not mentioned which part…

Provide an analysis for the transformer mentioned below. The followings are the reading from the series of test on a transformer. 10 kVA -240/415 V 50 Hz 1ø transformer 0.95 lagging power factor (Z18.19 °) Poc =150 W Transformer rating Open Circuit Test: Voc=240 V Inc = 5.00 A Short Circuit Test: P = 185 W V«=100 V Is = 24.10 A Determine: i) The transformer parameters and draw equivalent circuit referred to low voltage side ii) The appropriate full load voltage potential iii) The full load efficiency of the transformer iv) The short-circuit based voltage regulation

Provide an analysis for the transformer mentioned below. The followings are the reading from the series of test on a transformer. 10 kVA -240/415 V 50 Hz 1ø transformer 0.95 lagging power factor (Z18.19 °) Poc =150 W Transformer rating Open Circuit Test: Voc=240 V Inc = 5.00 A Short Circuit Test: P = 185 W V«=100 V Is = 24.10 A Determine: i) The transformer parameters and draw equivalent circuit referred to low voltage side ii) The appropriate full load voltage potential iii) The full load efficiency of the transformer iv) The short-circuit based voltage regulation

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter3: Power Transformers

Section: Chapter Questions

Problem 3.16P: A single-phase, 50-kVA,2400/240-V,60-Hz distribution transformer has the following parameters:...

See similar textbooks

Similar questions

An infinite bus, which is a constant voltage source, is connected to the primary of the three-winding transformer of Problem 3.53. A 7.5-MVA,13.2-kV synchronous motor with a sub transient reactance of 0.2 per unit is connected to the transformer secondary. A5-MW,2.3-kV three-phase resistive load is connected to the tertiary Choosing a base of 66 kV and 15 MVA in the primary, draw the impedance diagram of the system showing per-unit impedances. Neglect transformer exciting current, phase shifts, and all resistances except the resistive load.
A two-winding single-phase transformer rated 60kVA,240/1200V,60Hz, has an efficiency of 0.96 when operated at rated load, 0.8 power factor lagging. This transformer is to be utilized as a 1440/1200-V step-down autotransformer in a power distribution system. (a) Find the permissible kVA rating of the autotransformer if the winding currents and voltages are not to exceed the ratings as a two-winding transformer. Assume an ideal transformer. (b) Determine the efficiency of the autotransformer with the kVA loading of part (a) and 0.8 power factor leading.
An open-delta three-phase transformer system has one transformer center-tapped to provide a neutral for single-phase voltages. If the voltage from line to center tap is 277 V, what is the high-leg voltage?
A single-phase, 50-kVA,2400/240-V,60-Hz distribution transformer has the following parameters: Resistance of the 2400-V winding: R1=0.75 Resistance of the 240-V winding: R2=0.0075 Leakage reactance of the 2400-V winding: X1=1.0 Leakage reactance of the 240-V winding: X2=0.01 Exciting admittance on the 240-V side =0.003j0.02S (a) Draw the equivalent circuit referred to the high-voltage side of the transformer. (b) Draw the equivalent circuit referred to the low-voltage side of the transformer. Show the numerical values of impedances on the equivalent circuits.
The nameplate on a transformer will indicate whether or not it is a Class 2 transformer. (True) (False) (Circle the correct answer.)
For an ideal transformer, the efficiency is (a) 0 (b) 100 (c) 50
Three single-phase, 50 kVA, 2300/230 V, 50 Hz transformers are connected to form a 3-phase, 2300/230V transformer bank. The equivalent impedance of each transformer referred to low voltage is 0.03 + j0.02 2. The 3-phase transformer supplies a 3-phase load, 120 kVA, 230 V, 0.9 p.f (lag). Determine (a) the transformer winding currents. (b) the voltage regulation. (comment on the obtained results)
A 200 kVA single-phase transformer is in circuit throughout 24 hours. For 8 hours in a day, the load is 150 kW at 0.8 power factor lagging and for 7 hours, the load is 90 kW at 0.9 power factor. Remaining time or the rest period, it is at no-load condition. Full-load Cu loss is 4 kW and the iron loss is 1.8 kW. Calculate the all-day efficiency of the transformer.
Problem 2 (Transformer): The following are the open circuit and short circuit test data of a single-phase, 10 kVA, 2200/220V, 60 Hz transformer O/C Test (HV sideS/C Test (LV side Open) Shorted) Voltmeter Ammeter Wattmeter 220V 2.5A 100W 150V 4.55A 215W 1. Find the equivalent circuit with respect to HV and LV side 2. Find the efficiency and the voltage regulation of the transformer when supplying rated load at 0.8 pf lag. 3. Maximum efficiency and voltage regulation.
. A 25 kVA, single phase 2200/220 V transformer has a primary winding resistance of 1 ohms, secondary winding resistance of 0.01 ohms, primary leakage reactance of 1.5 ohms and secondary leakage reactance 0.015 ohms. The iron loss of the transformer is 206 watt. Calculate the efficiency of the transformer and the voltage regulations at the following condition. A. half load B. Full load c. 50% overload[Ans: 97.88%, 0.516%; 98.17%,1.033%; 97.94%,1.549%]
Q1-A 3-phase step down transformer 1200 KVA , 11000/2200 V, 50 Hz .The resistance /phase and leakage reactance/phase of the primary winding are 1.2Q and 4.8Q and the corresponding values for the secondary winding are 0.01Q and 0.06Q respectively if the primary winding is connected in delta and secondary in star. calculate: 1)The voltage to be applied at normal frequency to the primary to circulate full-load current through it when the secondary is short-circuited ii) The full load copper loss Q2- A 3-phase 250KVA, 11000/416 transformer is delta-connected on the primary and star connected on the secondary. The primary resistance / phase is 8 Q and secondary resistance/phase is 0.0034 Q. determine the efficiency on full-load at 0.8 power factor lagging if the iron loss is 660 W
A three phase transformer is used for ancillary services in a thermal power plant. It shows the following nameplate data: 30 MVA, 20/6.6 kV, and an impedance of 8%. The transformer has 21 taps to change the tap ratio in 1% increments. Neglect the transformer resistance. a) If the voltage at the high side is 18.5 kV, determine the tap ratio that must be used under a full load condition at unity power factor. b) What is the number of the actual tap? Assume you start counting from the lowest possible tap.