Pulley system consists of Block J m₁ = 50 kg. While Block K mk= 15 kg. Block J is released from rest. If the coefficient of kinetic friction between the Block K and the plane is equal to 0.30. calculate the tension in the cable (in Newtons) and the distance traveled (in meters) by Block K along the incline after 1.5 s. Kindly include the diagram and reference point. Complete step by step solution with detailed explanations. K 30°

Pulley system consists of Block J m₁ = 50 kg. While Block K mk= 15 kg. Block J is released from rest. If the coefficient of kinetic friction between the Block K and the plane is equal to 0.30. calculate the tension in the cable (in Newtons) and the distance traveled (in meters) by Block K along the incline after 1.5 s. Kindly include the diagram and reference point. Complete step by step solution with detailed explanations. K 30°

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter7: Dry Friction

Section: Chapter Questions

Problem 7.79P: The coefficient of rolling resistance between the 30-kg lawn roller and the ground is r=0.1. (a)...

See similar textbooks

Similar questions

consider the mass and pulley system in the attached file. mass m1 = 29 kg and mass m2 = 12kg. the angle of the inclined plane is given and the coefficient of kinetic friction between mass m2 and the inclined plane is uk = 0.12. assume the pulleys are massless and frictionless if the system is released from rest, what is the speed of mass m2 after 2.5 s? v(2.5 s) = ?
The lower block of mass m2 = 3.2 kg is pulled on by a rope with a tension force of 28 N. The upper block has mass m1 = 1.8 kg. The coefficient of kinetic friction between the lower block and the surface is 0.32. The coefficient of kinetic friction between the lower block and the upper block is also 0.32. What is the acceleration of the 3.2 kg block?
A block of mass m= 2.0 kg is released from rest on an inclined plane at a height of h = 1.5 m. It moves down the rough incline with slope theta= 30.0°and continues on the horizontal frictionless surface. As shown in the figure, there is a spring with negligible mass and force constant k = 300 N/m. The coefficient of kinetic friction between the block and the incline is 0.250 What is the speed of the block when it gets down on the horizontal surface before it touches the spring? The box continues to move on the horizontal surface and compresses the spring. What will be the maximum compression of the spring?
Block A in Fig. has mass 4.00 kg, and block B hasmass 12.0 kg. The coefficient of kinetic friction between block Band the horizontal surface is 0.25. (a) What is the mass of block C ifblock B is moving to the right and speeding up with an accelerationof 2.00 m/s2? (b) What is the tension in each cord when block B hasthis acceleration?
Small objects are delivered to the 78-in. inclined chute by a conveyor belt A which moves at a speed v1 = 1.7 ft/sec. If the conveyor belt B has a speed v2 = 8.6 ft/sec and the objects are delivered to this belt with no slipping, calculate the coefficient of friction μk between the objects and the chute. angle is 29 deg
Two blocks of equal masses ma=mb=m, connectedtogether with a massless cord of fixed length, slidedown an inclined plane. The coefficient of kineticfriction between block A and the inclined surface isµA=µ and the coefficient of kinetic friction betweenblock A and inclined surface is µB=2µ.a- Draw free body diagram for each block.b- Find the acceleration of blocks in terms of m, µand q.c- Find the tension in the cord in terms of abovementioned parameters.
Forces and Acceleration please answer in full solutionDetermine the acceleration of the system and the tension in each cable. The inclined plane is smooth and the coefficient of kinetic friction between the horizontal surface and the block C is k = 0.2
In the system shown, a spring is compressed and pushes a mass of 50Kg down the path shown with two different slopes. If the spring has a constant of 25 kN / m, what would have to be the deflection of the spring for the block to reach the limit at 2 m / s? The coefficient of kinetic friction is 0.15 and assume that starting from rest to make the ideal system
In the system shown, a spring is compressed and pushes a mass of 50Kg down the path shown with two different slopes. If the spring has a constant of 25 kN / m, what would have to be the deflection of the spring for the block to reach the limit at 2 m/s ? The coefficient of kinetic friction is 0.15 and assume that starting from rest to make the ideal system
By using a forked rod, a smooth cylinder C having a mass of 0.5 kg is forced to move along the vertical slotted path (r = 0.4 θ) m, where θ is in radians. If the angular position of the arm is θ = (0.3 t3 ) rad, where t is in seconds. The cylinder is in contact with only one edge of the rod and slot at any instant. Find "the force of the rod on the cylinder at the instant t=2s" Find "the normal force of the slot at the instant t=2s" Find the "radius of curvature at t=2s" Find the "ψ angle at t=2s"
A block of mass M1 resting on a 20.7° slope is shown. The block has coefficients of friction μs = 0.745 and μk = 0.464 with the surface. It is connected via a massless string over a massless, frictionless pulley to a hanging block of mass M2 = 2.62 kg. (a) What is the minimum mass M1 that will remain stationary and not slip? (b) If this minimum mass is nudged ever so slightly, it will start being pulled up the incline. What magnitude of acceleration will the minimum mass have?
The figure shows a junction of mass m = 10kg sliding on a rod in a vertical plane. Positioned 1 simpai is stationary and horizontal spring and tensioned Fp = 300N. If the spring constant is k = 1kN/m and the average frictional force between the rod and the junction is F = 30N. Calculate the speed at position 2. (Ans: 3.47m/s)