Q1: Fill the blanks with suitable words:1- The gradation curve provides useful information for the soil material such as ------, theand theofwww-*S2- Moisture (water) content of soil (w) is defined as the ratio of the ----------to the mass of ------ and is expressed as a -3- In pavement engineering, the bearing capacity of the soil is expressed by reference either toor to ------- and these parameters are very useful since they are utilized by many-----., or to4- The -------(M,) test is defined as the ratio of the ------- (a) to the ---- (Er).A- M, 1500 X CBR=5- Formula (A) is used to calculate M, for soil with CBR ------while the formula (B) is used for soil with CBR-----, the unitof these two formulas are inB- M, 2555(CBR)0.64wwww.=

NOTE- Hi! Thank you for the question, As per the honor code, we are allowed to answer three…

Q1: Fill the blanks with suitable words: 1- The gradation curve provides useful information for the soil material such as ------, the -, and the of 2-Moisture (water) content of soil (w) is defined as the ratio of the ----------to the mass of ----- - and is expressed as a --------. 3- In pavement engineering, the bearing capacity of the soil is expressed by reference either to and these parameters are very useful since they are utilized by many-----. or to www*--* 4-The- -(M) test is defined as the ratio of the ---- ------- (a) to the ➖➖➖➖➖➖➖ (&). 5- Formula (A) is used to calculate M, for soil with CBR ------ A- M, 1500 X CBR H while the formula (B) is used for soil with CBR-----, the unit of these two formulas are in 3 B- M,= 2555(CBR)0.64 wwww.

Q1: Fill the blanks with suitable words: 1- The gradation curve provides useful information for the soil material such as ------, the -, and the of 2-Moisture (water) content of soil (w) is defined as the ratio of the ----------to the mass of ----- - and is expressed as a --------. 3- In pavement engineering, the bearing capacity of the soil is expressed by reference either to and these parameters are very useful since they are utilized by many-----. or to www-- 4-The- -(M) test is defined as the ratio of the ---- ------- (a) to the ➖➖➖➖➖➖➖ (&). 5- Formula (A) is used to calculate M, for soil with CBR ------ A- M, 1500 X CBR H while the formula (B) is used for soil with CBR-----, the unit of these two formulas are in 3 B- M,= 2555(CBR)0.64 wwww.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Show complete solution and clear explanation thanks A rigid pavement of the proposed provincial road is to be used to carry a maximum wheel load of 60KN. Neglect the effect of dowels f'c=20MPa. Allowable tensile stress of concrete pavement is 0.6f'c. Calculate the allowable tensile stress of the concrete pavement and thickness of the pavement
Pavement grooving - is effective in providing skid-resistance and prevention of hydroplaning during wet weather. It consists of forming or cutting closely spaced transverse grooves on the runway surface, normally 1‚ÅÑ4 inch deep by 1‚ÅÑ4 inch wide and spaced 1 1‚ÅÑ2 inches apart. Although grooves can be formed while laying PCC pavement, HMA pavement (whether new or existing) requires grooves to be saw cut. This is very common on airport runways.
Calculate the design thickness in mm (rounded to the nearest tens) at the edges of a rigid pavement with dowels if the: Allowable tensile strength of concrete = 3.1 MPa Wheel load = 120 kN
Show complete solution with clear explanation thanks A rigid pavement is to be used to carry a wheel load of 49KN, the allowable tensile stress of the concrete is 1.4MPa. Sufficient dowels are used across the joints. Design the center of the thickness of the pavement at the center and base
The pavement bottom layer for modern roads construction, was developed by Indian The Chinese Telford John MacAdam choise correct
Show complete solution and clear explanation thank you A flexible pavement having a thickness of 46mm carries a static wheel load of W. The circular contact has an equivalent radius of 150mm. If the load W is assumed to be transmitted across a wide are of subgrade at an angle of 45 degrees compute the value of the wheel load W if the bearing stress of the base is 0.42 MPa
A pavement element along Thika road of 100x150x200 mm was subjected to an equalall round pressure of 120kn/m2 and axial load of 2.5KN in the X-direction. The changesin length are 0.92mm in X-direction, 0.27mm in the Y-direction and 0.18mm in the Z direction. Calculate thei. Elastic theory ratio, Eii. Poisson’s ratio,iii. Bulk Modulus, K
Calculate the equivalent radius of the contact area of tires considering the wheel load is 60 kN.Allowable bearing pressure on the base of the pavement is approximately 0.20 MPa and thethickness of pavement is calculated as 160 mm. Round up the answer in 10 mm interval.
choose True or false Q1A- Initial tangent modulus is given by the slope of a line drawn tangent to the stress-strain curve at any point on the curve. * True False B- Plastic shrinkage of concrete is higher at a larger cement content. * True False C- Dynamic modulus of elasticity of concrete is approximately taken as equal to the secant modulus of elasticity of concrete * True False
B. A rigid pavement with a 10-inch slab thickness, 90 percent reliability, E. = 4 million lb/in², 600 lb/in² modulus of rupture, 150 lb/in³ modulus of subgrade reaction, a 2.8 load transfer coefficient, initial PSI of 4.8, final PSI of 2.5, overall standard deviation of 0.35, and a drainage coefficient of 0.8 is designed. The pavement's design life is 20 years. The three-lane road is built for vehicles with one 20,000-pound single axle, one 26,000-pound tandem axle, and one 34,000-pound triple axle. Calculate the projected daily truck traffic on the three lanes.
Determine the safe wheel load it can carry of flexible pavement if the bearing pressure of subgrade is 24 MPa, while the thickness is 225 mm and the wheel contact area is 89500 mm^2 . Assume the load is distributed at 45 angle. pls answer w/ complete solution
A flexible pavement is constructed with 3 inches of hot-mix asphalt (HMA) wearingsurface, 6 inches of emulsion/aggregate-bituminous base, and 6 inches of crushedstone subbase. The subgrade has a soil resilient modulus of 8,000 lb/in2 , and M2 andM3 are equal to 1.0 for the materials in the pavement structure. The overall standarddeviation is 0.5, the initial PSI is 4.5, and the TSI is 2.5. The daily traffic has 1080 20-kipsingle axles, 400 24-kip single axles, and 680 40-kip tandem axles. How many yearswould you estimate this pavement would last (how long before its PSI drops below aTSI of 2.5) if you wanted to be 90% confident that your estimate was not too high,and if you wanted to be 99% confident that your estimate was not too high?